Widex c4-m, C4-m-cb User Instructions

Page 1
User instrUctions
The clear™440 SerieS
c4-m/c4-m-cb
beHinD-tHe-eAr
Page 2
Contents
THANK YOU... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
RIGHT/LEFT IDENTIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ACOUSTIC INDICATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
INSERTING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
REMOVING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
BATTERY DRAWER WITHOUT A NAIL GRIP . . . . . . . . . . . . 11
LOW BATTERY INDICATION . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TURNING THE HEARING AID ON AND OFF . . . . . . . . . . . . . . . .13
VOLUME ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
LOST PARTNER ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
LISTENING PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
SWITCHING BETWEEN THE LISTENING PROGRAMS . . . . .18
ZEN+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
USING A TELEPHONE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
POSITIONING THE HEARING AID AND EARMOULD. . . . . . . . 22
REMOVING THE HEARING AID AND EARMOULD. . . . . . . . . . 23
RIGHT/LEFT IDENTIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
POSITIONING THE HEARING AID AND
INSTANT EAR-TIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
THE ANCHOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
REMOVING THE HEARING AID AND
INSTANT EAR-TIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
2 3
Your widex Cleartm440 hearing aid
(To be filled out by the hearing care professional)
Date: ___________________________
Battery size: ___________________________
Ear-set:
 Earmould  Instant ear-tip  Custom ear-tip
Ear-tip size: Left Right
Tubing size: Left Right
Page 3
HEARING AID WITH A CUSTOM EAR-TIP . . . . . . . . . . . . . . . . . . 32
RIGHT/LEFT IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . 33
POSITIONING THE HEARING AID AND CUSTOM EAR-TIP . . . 34
REMOVING THE HEARING AID AND CUSTOM EAR-TIP . . . . . 35
CLEANING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
THE HEARING AID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
THE MICROPHONE OPENINGS . . . . . . . . . . . . . . . . . . . . . . . 37
THE EAR-SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
THE EARMOULD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
THE INSTANT AND CUSTOM EAR-TIPS . . . . . . . . . . . . . . . . 40
ASSEMBLING THE EAR-SET - INSTANT EAR-TIP. . . . . . . . 42
ASSEMBLING THE EAR-SET - CUSTOM EAR-TIP. . . . . . . . 43
IN CASE OF MALFUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
GOOD ADVICE AND WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . 47
REGULATORY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
4 5
thank You...
...for choosing a Widex hearing aid.
Your hearing aid is designed with high-quality sound, ease, comfort and freedom of choice in mind.
We hope you will be pleased with your new Widex hearing aid.
IMPORTANT
This booklet contains important information and instructions. Please read this booklet carefully before you start using the hear­ing aid.
Your hearing aid, ear-set and accessories may not look exactly as illustrated in this booklet. We also reserve the right to make any changes considered necessary.
Page 4
6 7
the hearing aid
The illustration below shows the hearing aid without an ear-set.
Microphoneopenings Onofffunction Nailgrip LEDRLID
Below, your hearing care professional can tick the ear-set solution chosen for you.
 Earmould  Instant ear-tip  Custom ear-tip
RIGHT/LEFT IDENTIFICATION
The arrow shows the position of the identification mark (red mark = right and blue mark = left).
ACOUSTIC INDICATORS
The hearing aid may be set to produce a signal to in­dicate the use of certain functions. The signal may be a spoken message or tones adjusted by the hearing care professional in consultation with you. The signal can also be deactivated.
Adjusting volume Tone* Off
Confirming RC program key use
Clicking sound
Off
Changing program Message Tones Off
Starting up the hearing aid Message Tone Off
Warning about low battery Message 4 tones Off
Warning about lost partner Message Off
Service reminder Message Off
* bold indicates standard setting
Page 5
8 9
THE BATTERY
We recommend zinc-air batteries. Use a size 10 bat- tery for the hearing aid.
To obtain replacement batteries, please consult your hearing care professional. It is important to take note of the expiry date and the recommendations regard­ing disposal of used batteries on the battery pack.
INSERTING THE BATTERY Before inserting a new battery into
the hearing aid, remember to re­move the adhesive tab. Once the tab has been removed, the battery will start functioning after a few sec­onds. Do not use batteries on which there is a sticky residue from the tab or other unwanted substance.
Use the nail grip to gently swing the battery drawer open. Do not press the drawer beyond the open po­sition.
Place the battery in the drawer as illustrated, so that the plus (+) sign on the battery is facing towards you when you hold the hearing aid as shown. You can use the battery magnet provided to steer the battery into place.
If the battery drawer does not close easily, the bat­tery is incorrectly inserted.
When changing battery, it is a good idea to hold the hearing aid over a table.
+
Page 6
10 11
REMOVING THE BATTERY
1. Open the battery drawer as previously described. Place the hearing aid on the provided cloth on a clean, plane surface and turn it as illustrated.
2. Supporting the drawer with your finger, use the battery magnet provided to push the battery out of the battery drawer from the minus side.
1 2
BATTERY DRAWER WITHOUT A NAIL GRIP
The hearing aid may be provided with a battery drawer without a nail grip, which means that you need a tool to open the battery drawer. This type of drawer can be a good choice if the hearing aid is worn by a child. A special tool for opening the drawer will be included with this drawer.
The battery drawer is opened as illustrated.
Page 7
12 13
IMPORTANT
Your hearing aid may stop functioning, for instance if the battery is exhausted. You should be aware of this possibility, in particular when you are in traffic or are otherwise dependent on warning signals.
LOW BATTERY INDICATION An acoustic indicator will sound when the battery is
nearly exhausted, unless this function has been disa­bled (see page 7). We recommend that you always have a spare battery with you.
Never leave an exhausted battery in the hearing aid. Exhausted batteries may leak, damaging the hearing aid.
TURNING THE HEARING AID ON AND OFF
The battery drawer of the hearing aid also functions as the on/off switch.
Close the battery drawer to turn on the hearing aid. An acoustic indica­tor will indicate that the hearing aid has been switched on unless this function has been disabled.
Open the battery drawer to turn off the hearing aid.
Please remember to turn off the hearing aid when it is not in use. Re­move the battery if the hearing aid will not be used for several days.
Page 8
14 15
VOLUME ADJUSTMENT
The hearing aid volume is adjusted automatically in accordance with your sound environment.
Ordinarily you cannot fine-tune the volume in your hearing aid. However, if you have a remote control, this option becomes available.
In the default setting, any volume adjustment via the remote control will affect both hearing aids.
For any adjustment of the steps in which volume in­creases or decreases, consult your hearing care pro­fessional.
If you have a remote control, please also refer to the user instructions for this.
IMPORTANT
If the volume in the hearing aid is generally too loud or too weak, or the reproduced sounds are distorted, or if you would like any further information, consult your hearing care professional.
LOST PARTNER ALARM (Note: Only applicable if this feature has been acti-
vated by your hearing care professional).
If one of your hearing aids falls off your ear, and/or the battery is exhausted, a tone signal and a spoken message will sound two times in the other hearing aid, and a diode will flash on both hearing aids.
When the lost hearing aid is repositioned, and/or the battery is exchanged, the diodes stop flashing.
Page 9
16 17
LISTENING PROGRAMS
By default, your hearing aid has one listening pro­gram (Master). If you have a remote control, your hearing aid may additionally be provided with four of the following programs, plus the special Zen pro­gram called Zen+.
Please also refer to the user instructions for your re­mote control.
 Music For listening to music
 TV For listening to the TV
 Comfort Attenuates background noise
 Reverse focus Focus on sounds from behind
 Audibility Extender Makes high-frequency sounds
audible
 Phone For listening to the telephone
 Zen Generates different kinds of
tones. Contains one style
Compound programs
The Master program in one ear and Zen, Audibility Extender, Reverse focus or Phone in the other
Zen+ Special Zen program with up to
three different Zen styles
If your needs change over time, the combination of listening programs can be altered.
The Zen program may be used with amplification so that both the surrounding sounds and the Zen tones are heard together. Or, it may be used alone (without amplification) in quiet when you are not required to hear surrounding sounds.
The duration of the Zen play time can be set by your hearing care professional according to your needs.
IMPORTANT
Page 10
18 19
THE HE ARING AID
SWITCHING BETWEEN THE LISTENING PROGRAMS Each time you change program via the remote con-
trol, an acoustic indicator will sound unless this func­tion has been disabled.
Program Messageoroneshortbeep Program Messageortwoshortbeeps Program Messageorthreeshortbeeps Program Messageoronelongandoneshort
beep
Program Messageoronelongandtwoshort
beeps
Zen Messageortone
In the default setting, both your hearing aids will be affected when you change programs.
USING A TELEPHONE
When using a telephone, we recommend that you hold the telephone against your head at an angle above your ear, rather than directly against the ear. If the sound is not optimal, try moving the telephone earpiece to a slightly different position.
Page 11
20 21
HEAR ING AID WITH AN EARMOULD
hearing aid with an earmould
The ear-set consists of the following parts:
Earhook Tubing Earmould
3a Sound bore 3b Vent
2
1
3
3a
3b
POSITIONING THE HEARING AID AND EARMOULD
Insert the earmould in the ear canal while holding the lower part of the tub­ing. It may help to pull the outer ear backwards and upwards with the oppo­site hand.
Place the hearing aid behind the ear, so that the ear­hook rests comfortably on the ear, close to your head.
Page 12
22 23
HEAR ING AID WITH AN INSTANT EA R-TIP
REMOVING THE HEARING AID AND EARMOULD
Remove the hearing aid from its position behind the ear.
Carefully pull the earmould out of the ear canal, while holding the lower part of the tubing.
If it is difficult, you can try to move the earmould carefully from side to side while pulling it out. It may also help to pull the outer ear backwards and up­wards with the opposite hand.
hearing aid with an instant ear-tiP
The ear-set consists of the following parts:
Tubingwith
1a. hook 1b. anchor
Instantear-tip
1a.
1b.
2.
1.
Page 13
24 25
HEAR ING AID WITH AN INSTANT EA R-TIP
RIGHT/LEFT IDENTIFICATION
The ear-set tubing is available in different lengths for the right and left ear, respectively. The individu­al size is printed on the ear-set (see arrow). Red print indicates that it is for the right ear, and blue print that it is for the left ear.
POSITIONING THE HEARING AID AND INSTANT EAR-TIP
Place the hearing aid behind the ear, so that the tubing rests comfortably on the ear, close to your head.
Insert the ear-tip in the ear canal while holding the lower part of the tubing.
Make sure that the anchor is positioned comfortably, securing the position of the ear-set.
IMPORTANT
Page 14
26 27
HEAR ING AID WITH AN INSTANT EA R-TIP
THE ANCHOR
The anchor is supplied sepa­rately from the rest of the ear­set and can be used in differ­ent ways. First it is shown how the anchor can be used with­out prior trimming:
Pull the pointed end of the anchor through the upper hole on the side of the tubing. The angled grip should be pointing towards the hearing aid.
Continue pulling until the an­chor is stopped by the grip at the end.
Your ear-set is now ready for use and is placed so that it rests comfortably in your ear.
The anchor can also be trimmed to fit your ear. There are several ways of doing this. Two such examples are shown here:
EXAMPLE 1
Pull the pointed end of the an­chor through the upper hole on the side of the tubing. The angled grip should be pointing towards the hearing aid.
Continue pulling until the anchor is stopped by the grip at the end. Now turn the ear-set around.
Guide the pointed end of the an­chor through the lower hole to form a loop.
When the loop is the correct size (according to instructions from your hearing care professional), cut off any excess, leaving only the loop.
Page 15
28 29
HEAR ING AID WITH AN INSTANT EA R-TIP
EXAMPLE 2
Pull the pointed end of the an­chor through the upper hole on the side of the tubing. The angled grip should be pointing towards the hearing aid.
Continue pulling until the anchor is stopped by the grip at the end.
Loop the anchor in the direction indicated by the dotted line and arrows.
Guide the anchor through the lower hole on the side of the tubing as il­lustrated to form a loop.
When the loop is the correct size (according to instructions from your hearing care professional), cut off any excess, leaving only the loop.
GENERAL INFORMATION WHEN TRIMMING:
Take great care to cut off all the excess so that the end of the an­chor loop is flush with the small hole and there are no sharp edg­es.
Use the tip of your finger to check for sharp edges. If part of the anchor sticks out through the hole, creat­ing an uneven surface, this may cause irritation of the ear.
Page 16
30 31
HEAR ING AID WITH A CUSTOM EAR-TIP
REMOVING THE HEARING AID AND INSTANT EAR-TIP
Remove the hearing aid from its position behind the ear.
Carefully pull the ear-tip out of the ear canal, while holding the lower part of the tubing.
hearing aid with a Custom ear-tiP
The ear-set consists of the following parts:
Tubingwith
1a. hook
Customear-tipwith
2a. extraction cord
2b. vent (optional)
2.
1a.
2b.
1.
2a.
Page 17
32 33
HEAR ING AID WITH A CUSTOM EAR-TIP
RIGHT/LEFT IDENTIFICATION
The ear-set tubing is available in different lengths for the right and left ear, respectively. The individual size is printed on the tubing. Red print indicates that it is for the right ear and blue print that it is for the left ear.
The custom ear-tip has ”Widex” print­ed on it. Red print indicates that the ear-tip is for the right ear, and blue print that it is for the left ear.
POSITIONING THE HEARING AID AND CUSTOM EAR-TIP
Insert the custom ear-tip in the ear canal while holding the lower part of the tubing.
It may help to pull the outer ear backwards and upwards with the opposite hand.
Place the hearing aid behind the ear, so that the tub­ing rests comfortably on the ear, close to your head.
Page 18
34 35
CLEANING
REMOVING THE HEARING AID AND CUSTOM EAR-TIP
Remove the hearing aid from its position behind the ear.
Take hold of the extraction cord and carefully pull the custom ear­tip out of the ear canal.
IMPORTANT
Do not pull the tubing to remove your hearing aid. Use the ex­traction cord.
Cleaning
The following cleaning accessories are available for the hearing aid and ear-set.*
 Cloth  Waxremovingtool  Cleaningthread
Contact your hearing care professional if you need additional supplies of cleaning accessories.
* Selection depends on ear-set type
Page 19
36 37
CLEANING
THE HEARING AID
Clean the hearing aid with the soft cloth after use. Never use water or cleaning solutions to clean the hearing aid.
THE MICROPHONE OPENINGS Clean the microphone openings
by passing the wax removing tool straight through the open­ings.
If you feel resistance, withdraw the tool and try again. Use only the wax removing tool provided.
When the hearing aid is not in use, the battery drawer should be left open, to ventilate the hearing aid and allow it to dry.
THE EAR-SET
Make sure that the entire ear-set is always clean and free of earwax, moisture or the like. Wipe the ear-set with the cloth at regular intervals. Never use alcohol or other cleaning solutions to clean the ear-set.
THE EARMOULD Disconnect the earmould from
the tubing.
Clean the vent with the wax removing tool.
Clean the sound bore with the wax removing tool.
Page 20
38 39
At least once a week or more of­ten if required, disconnect the earmould from the tubing and rinse the earmould thoroughly in lukewarm water. Allow it to dry overnight.
If there is still moisture in the earmould, use a blower or similar to blow it dry be- fore attaching the earmould to the tubing.
Your earmould tubing should be changed as re­quired.
For further supplies of tubing, or if the earmould no longer fits your ear, contact your hearing care pro­fessional.
THE INSTANT AND CUSTOM EAR-TIPS
Cleaning a blocked tubing: Grip the hearing aid between your thumb and index finger. With your other hand grip the tubing and pull straight apart as indicated by the arrow. Al­ternatively, a small tool is avail­able for removing the tubing. Contact your hearing care pro­fessional if you want more in­formation.
Pull the instant ear-tip off the tubing.
If you have a custom ear-tip, carefully pull it off the tub­ing, wriggling the tip of the tubing gently.
Page 21
40 41
Pass the cleaning thread through the tubing. Pull the thread out at the other end.
If your custom ear-tip is provided with a vent, use the wax removing tool to clean the vent.
If necessary the instant/custom ear-tip can be rinsed thoroughly in lukewarm water when disconnected from the rest of the ear-set.
Allow it to dry overnight.
ASSEMBLING THE EAR-SET - INSTANT EAR-TIP
Push the instant ear-tip onto the tubing. It is very impor­tant that the ear-tip is firmly secured.
Click the ear-set onto the top of the hearing aid as il­lustrated.
The ear-set should be changed as required.
For further supplies of ear-sets or if the instant ear­tip size no longer fits your ear, contact your hearing care professional.
Page 22
42 43
ASSEMBLING THE EAR-SET - CUSTOM EAR-TIP
Hold the custom ear-tip be­tween two fingers, with the ex­traction cord downwards. Hold the tubing with the other hand as illustrated. Gently press the tubing into place in the custom ear-tip.
Use your fingernail to press the tubing in as far as it will go so that it is securely fastened.
Click the ear-set onto the top of the hearing aid as illustrated.
The tubing should be changed as required.
For further supplies of tubing or if the custom ear-tip no longer fits your ear, contact your hearing care professional.
in Case of malfunCtion
Problem Possible cause Solution
The hearing aid is completely silent
The hearing aid is not turned on
Make sure the battery drawer is closed
The battery does not work
Insert a new battery in the battery drawer
The sound outlet of the earmould/ ear-tip is blocked
Earmould: Clean the blocked sound bore (see page 37)
Instant ear-tip:
Replace or clean the ear-tip (see page 40) Custom ear-tip: Clean the ear-tip (see page
40)
The hearing aid volume is not powerful enough
The battery is nearly exhausted
Insert a new battery in the battery drawer
The sound outlet of the earmould/ ear-tip is blocked
Earmould: Clean the blocked sound bore (see page 37)
Instant ear-tip:
Replace or clean the ear-tip (see page 40) Custom ear-tip: Clean the ear-tip (see page
40)
Your ear is blocked by earwax
Contact your ENT doctor/physician
Your hearing may have changed
Contact your hearing care professional
Page 23
44 45
Problem Possible cause Solution
The hearing aid whistles continuously
Your ear is blocked by earwax
Contact your ENT doctor/physician
The tubing is yellow, stiff or broken
Replace the tubing
The earmould/ ear-tip is not correctly placed in your ear canal
Take the earmould/ ear-tip out and rein­sert it
The earmould/ ear-tip fit is too loose
Contact your hearing care professional
Earmould:
The tubing often comes off the ear­mould or hearing aid hook
Replace the tubing
Earmould:
The hook is cracked
Contact your hearing care professional
Your two hearing aids are not working in synchrony
The connection between the hearing aids is lost
Turn the hearing aids off and on again
Caring for Your hearing aid
The hearing aid is a valuable object and should be treated with care. Here are some things you can do to prolong the life of your hearing aid:
• Turn off your hearing aid when it is not in use. Re­move the battery if the hearing aid will not be used for several days.
• When the hearing aid is not in use, keep it in its case in a cool, dry location out of reach of children and pets.
• Do not expose the hearing aid to extreme temper­atures or high humidity.
• Do not wear your hearing aid while in the shower or swimming, or when using a hair dryer, perfume or other sprays.
• In environments with high humidity, a Widex dry­ing kit may be used daily to reduce the amount of moisture inside the hearing aid. See the instruc­tions enclosed with the Widex drying kit.
Page 24
46 47
good adviCe and warnings
Hearing aids and batteries can be dangerous if swal lowed or used improperly. Swallowing or improper use can result in severe injury or even fatalities. In case of ingestion, contact a physician immediately.
• Keep hearing aids and their parts, accessories and batteries out of reach of children and anyone else who might swallow such items or otherwise cause injury to themselves. Do not change batteries in front of them and do not let them see where you keep your battery supply. Discard used batteries carefully.
• Batteries are very small and can easily be mistaken for pills or the like. Never put a battery or hearing aid in your mouth for any reason, as you may risk swallowing it.
CAUTION
• Never allow others to wear your hearing aid, as this could cause permanent damage to their hear ing.
• The hearing aid will not restore normal hearing but can help you to make the best possible use of your remaining hearing ability. However, you should be aware that it takes time to get used to a new hear­ing aid and new sounds.
• When selecting a listening program, please re­member that there are situations in which it is par­ticularly important to be able to hear the surround­ing sounds (e.g. traffic, warning signals).
• The use of hearing aids increases the risk of accu­mulation of earwax. Contact your physician/ENT doctor if you suspect that a plug of earwax has ac­cumulated in your ear. Earwax may not only reduce your own hearing but also the effect of the hearing aid considerably. It is a good idea to ask your phy­sician to clean your ears a couple of times a year.
• The hearing aid is made of modern non-allergenic materials. Nonetheless, in rare cases skin irritation may occur. If you notice skin irritation in or around your ear or ear canal, contact your hearing care professional.
Page 25
48 49
• Be aware that the use of any type of hearing aid may involve a slightly increased risk of infection in the ear canal. An infection can arise as a result of inadequate ventilation of the ear. We therefore rec­ommend that you remove the hearing aid and ear­set from your ear at night to allow the ear canal to be ventilated. Make sure that you clean and inspect your hearing aid and ear-set as required. If an in­fection occurs, you should seek medical attention and contact your hearing care professional for ad­vice on how to disinfect the various hearing aid parts. Do not under any circumstances use alcohol, chlorine or similar substances.
• If you notice scratches in your ear canal, contact your hearing care professional or ENT doctor for advice.
• Your hearing aid uses a built-in transceiver for co­ordination between the hearing aids. The magnetic field strength of the transceiver is very low.
• Your hearing aid has been tested for interference according to international standards. Nevertheless, it is possible that unforeseen interference may oc­cur in the hearing aid due to electromagnetic radi­ation from other products such as alarm systems and mobile phones.
• Although your hearing aid has been designed to comply with the most stringent international elec­tromagnetic compatibility standards, the possibili­ty cannot be excluded that it may cause interfer­ence with other equipment, such as medical devic­es.
• Never try to open or repair the hearing aid your­self.
• Do not wear your hearing aid during X-rays, scans or radiation treatments. Other types of radiation, such as that in a microwave oven, can also damage your hearing aid. Radiation from, for example, room surveillance equipment, burglar alarms and mobile phones is weaker and will not damage the hearing aid.
• Widex hearing aids are not certified for use in mines or other areas with explosive gases.
Page 26
50 51
regulatorY information
Hereby, Widex A/S declares that this C4-m and C4-m-CB are in compliance with the essential re­quirements and other relevant provisions of Direc­tive 1999/5/EC.
A copy of the Declaration of Conformity can be found at: http://www.widex.com
WIDEX A/S
Nymoellevej 6, DK-
3540 Lynge
Denmark
www.widex.com
Federal Communications Commission and Industry Canada Statement
FCC ID: TTY-C4M FCC ID: TTY-C4MCB IC: 5676B-C4M IC: 5676B-C4MCB
This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ­ing interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea­sonable protection against harmful interference in a resi­dential installation. This equipment gene rates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm­ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mea sures:
Page 27
52 53
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
NOTE: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in con­junction with any other antenna or transmitter.
This equipment complies with the Industry Canada RF radiation exposure limits set forth for an uncontrolled environment as per IC RSS-102.
Changes or modifications to the equipment not expressly approved by Widex could void the user’s authority to op­erate the equipment.
Hearing aids, accessories and batteries should not be disposed of with normal household waste. Please consult your na­tional Widex distributor for advice on how to dispose of these items.
Page 28
Page 29
¡9 514 0134 001g¤
Printed by HTO / 2010-07 9 514 0133 001 #01
¡#01v¤
Loading...