WHIRLPOOL PWTL1916/N Daily Reference Guide
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
CONTROL PANEL
1 Programme selector
2 “Start/Pause“ button
3 “Spin“ button
4 “Start delay“ button
5 “Reset“ button
6 Washing phase
PROGRAMME CHART
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bracket is removed.
For more detailed instructions on how to remove it, see the Installation Guide.
6
54
1 2 3
INDICATORS
Lid open
Failure: Call Service
Failure: Water lter clogged
Failure: No water
In the event of any failure, refer to the
“TROUBLESHOOTING“ section
EN
Power consumption in o-mode 0,11 W / in left-on mode 0,11 W
Max load 6,0 Kg
Temperatures
Programme
Setting Range
Max, spin
speed
(rpm)
Max
load
(kg)
Duration
(h : m)
Cotton 60°C 40 - 95°C 1200 6,0 3:00
Jeans 40°C 40°C 1000 4,0 1:30
Hygiene 60°C 60°C 1200 6,0 2:30
Synthetics 40°C 30 - 40°C 1200 3,0 1:50
Delicates 30°C 30 - 40°C 1000 1,5 0:45
Mixed 40°C 40°C 1200 3,0 1:00 –
Rapid 15’ 30°C 30°C 1200 3,0 0:15
Wool/Handwash 40°C 20 - 40°C 1000 1,0 0:35 –
20°C 20°C 1200 6,0 3:15
1151 6,0 3:15
40°C 40°C
1151 3,0 2:30
1151 1,5 1:50
Rinse + Spin – – 1200 6,0 – – –
Spin – – 1200 6,0 – – – – – – – – – –
Drain – – – – – – – – – – – – – –
6,0 3:30 –
3,0 2:45 –
Eco Cotton 60°C
60°C 1200
40°C 1200 3,0 2:00 –
Dosing required Dosing optional
Eco Cotton - Test wash cycles in compliance with regulations 1061/2010. Set “Cotton 40 °C” or
“Cotton 60°C” wash cycle together with “Energy saver” option to access this cycles.
Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most
ecient programme in terms of energy and water consumption for washing normally soiled
cotton laundry. Display only: spin speed values shown on the display can slightly diers from
the values stated in the table.
For all Test I nstitutes
Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C.
PRODUCT DESCRIPTION
1. Lid handle
2. Lid
3. Control panel
4. Detergent dispenser
5. Drum
6. Water lter - behind the cover
7. Mobility lever (depending on model)
8. Adjustable feet (x2)
3.
1.
2.
4.
5.
6.
7.
8.
Detergents and additives
Pre-
wash
Main
wash
Softener
Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.
This data may dier in your home due to changing conditions in inlet water temperature,
water pressure etc. Approximate programme duration values refer to the default setting of
the programmes, without options. The values given for programmes other than the Eco 4060 programme are indicative only.
* After programme end and spinning with maximum selectable spin speed, in default
programme setting
6th Sense - The sensor technology adapts water, energy and programme duration to your
wash load.
Recommended
Powder Liquid
detergent
Residual
dampness % *
Total water lt
consumption
kWh
Energy
57 1,20 48 55
–
– – – –
– – – –
40 0,56 50 40
–
– – – –
– – – –
–
–
–
61 0,15 30 21
– – – –
53 0,25 53 20
52 0,89 53 43
53 0,51 37 32
55 0,35 31 31
– – – – – –
53 0,78 46 –
53 0,71 32 –
53 0,53 32 –
Laundry
DETERGENT DISPENSER
Main wash compartment
Detergent for the main wash, stain remover or
water softener.
Prewash compartment
Detergent for the prewash.
Softener compartment
Fabric softener. Liquid starch. Bleach.
Pour in softener, starch or bleach solution
only up to the “max” mark.
Release button
Press to remove tray for cleaning.
temperature °C
PROGRAMMES
For choosing the appropriate programme for your kind of
laundry, always respect the instructions on the care labels
of the laundry. The value given in the tub symbol is the
maximum temperature possible for washing the garment.
Cotton
Normally to heavily soiled and robust cottons .
Jeans
Turn garments inside-out before washing and use a liquid detergent.
Synthetics
For washing soiled garments made from synthetic fibres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
Hygiene
This program removes 99 % of bacteria while washing normally to
heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
Delicates
For washing particularly delicate garments. Preferably turn garments
inside out before washing.
Mixed
For washing lightly to normally soiled resilient garments in cotton,
linen, synthetic fibres and mixed fibres.
Rapid 15’
Refresh programme. Briefly worn clothing made of cotton, artificial
fibers and blends with cotton. Use lowest recommended detergent
amount.
Wool/Handwash
All wool garments can be washed using programme ‚ “Wool“ even
those carrying the “hand-wash only“ label. For best results, use special
detergents and do not exceed max kg declaration of laundry.
Eco 40-60
For washing normally soiled cotton garments declared to be washable
at 40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most efficient in terms of water and energy
consumption.
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Rinse + Spin
Separate rinse and intensive spin programme. For robust
laundry.
Spin
Spins the load then empties the water. For robust laundry.
Drain
Drain only - no spinning.
Eco Cotton
For washing normally soiled cotton garments. At 40°C and 60°C.
FIRST TIME USE
To remove any manufacturing debris select the “Cotton“ programme
at a temperature of 95°C. Pour a small quantity of detergent powder
into the main wash compartment of the detergent dispenser
(maximum 1/3 of the quantity the detergent manufacturer
recommends for lightly soiled laundry). Start the programme without
adding any laundry.
DAILY USE
Prepare your laundry according to the recommendations in the “HINTS
AND TIPS“ section. Load the laundry, close the drum door and check
that it is closed properly. Pour in the detergent and any additives.
Observe the dosing recommendations on the detergent pack. Close the
lid. Turn the programme selector to the desired programme and select
any option if needed. The indicator for the “Start/Pause” button
flashes and the indicator for the preset spin speed lights up. The speed
can be changed by pressing the “Spin” button. Open the tap and
press the “Star t/Pause” button to start the wash cycle. The “Start/
Pause” indicator will lights up and the door will be locked. Due to
variations in load and temperature of inlet water, the remaining time is
newly calculated in certain programme phases.
PAUSE OR CHANGE A RUNNING PROGRAMME
To pause the wash cycle, press the “Start/Pause“ button, the
indicator light blinks. Select any new programme, temperature, options
or spin speed if you wish to change those settings. Press the “Start/
Pause“ button again to start the wash cycle from the point at which
it was interrupted. Do not add detergent for this programme.
LID OPEN INDICATOR
Before starting and after the end of a programme, the “Lid open“
indicator lights to show that the lid can be opened. As long as a wash
programme is running, the lid remains locked and must on no account
be forced open. In case you have an urgent need to open it during a
running programme, for example to add more laundry, or to remove
laundry which was loaded by mistake, press the “Start/Pause“
button. If the temperature is not too high, the “Lid open“ indicator
light turns on. It may last a while until you can open the lid. Press “Start/
Pause“ to proceed with the programme again.
PROGRAMME END
The “Lid open“ indicator lights up. Turn the programme selector to
the “O“ position and close the water tap. Open the lid and drum and
unload the machine. Leave the Lid open for some time to allow the
interior of the machine to dry. After about a quarter of an hour, the
washing machine will switch off completely to save energy.
To cancel a running programme before the end of cycle, press the
“Reset“ button for at least 3 seconds. The water is drained out. It may
last a while until you can open the lid.
OPTIONS
! When the combination of programme and additional option(s) is not
possible, the indication lights switch o automatically.
! Unsuitable combinations of options are deselected automatically.
Start delay
To set the selected programme to start at a later time, press the “Delay
Timer” button until the desired delay time indication is illuminated.
The lamp for the “Start delay“ option button lights up, and it goes off
when the programme starts. Once having pressed the “Start/Pause“
button, the countdown of the time delay begins. Number of hours preselected can be reduced by pressing the “Start delay“ button again.
Do not use liquid detergent when activating this option. To cancel
the “Start delay“ turn the programme selector to another position.
Prewash
Only for heavily soiled loads (for example sand, granular dirt). Increases
the cycle time by approximately 15 min. Do not use liquid detergent for
the main wash when activating the Prewash option.
Rapid
Enables quicker washing by shortening the programme duration.
Recommendable for small loads or only lightly soiled laundry.
Intensive rinse
Helps to avoid detergent residues in the laundry by extending the
rinse phase. Particularly suitable for washing baby laundry, for people
suffering from allergies and for areas with soft water.
Energy saver
With a lower temperature and slightly modified washing duration, the
optimum combination of excellent washing results and even lower
energy consumption is achieved.
Spin
Every programme has a predefined spin speed. If you want to change
the spin speed, press the “Spin“ button. If spin speed “0“ is selected,
the final spinning is cancelled but intermediate spin peaks remain
during the rinse. The water is drained out only.
BLEACHING
Wash your laundry in the desired programme, Cotton or Synthetics
, adding an appropriate amount of chlorine bleach to the Softener
chamber (close the lid carefully). Immediately after the end of
the programme, turn the “Programme selector” and start the desired
programme again to eliminate any residual bleach smell; if you want,
you can add softener. Never put both chlorine bleach and softener into
the softener chamber at the same time.
Loading...