Whirlpool AWO 7346, AWO 7366, PWF 2766 INSTRUCTION FOR USE

30106242GB.fm Page 1 Friday, December 19, 2008 9:35 AM

GB PROGRAMME CHART

A. “Door open” indication

}

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

White Cotton /

Antibacterial

Colours Buntwäsche

Tempe-

rature

70 - 95 °C

20 - 60 °C

Care

Labels

Max

Load

- Respect the manufacturer’s recommendations on the care

label

Normally to heavily soiled bed linen, table linen and underwear , towels, shirts

7.0

etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of

7.0

Nov. 2001.

C D

Type of wash/Notes

E. Programme selector F. “Start/Pause” button

A B

G. “Spin” button H. Programme sequence indicator

I. “Reset” button

J L

Detergents and additives Special options

Pre-

Main

wash

❉

Softener Pre-

wash

Yes

❉❉❉❉❉ ❉❉❉

J. “Start delay” button K. “Temperature” button L. Display

wash

Vor-

wäsche

Start

delay

Start-

vorwahl

Easy

ironing

Leicht

bügeln

Intensive

rinse

Intensiv

spülen

Rinse

hold

Spül-

stopp

Spin

Schleu-

dern

Max Spin

Speed

rpm

max.

Synthetics Pflegeleicht

Daily load Mischwäsche

Quick wash

Delicates Feinwäsche

SuperEco

Lingerie Dessous

Wool Wolle

Handwash

Rinse & Spin Spülen & Schleudern

Spin Schleudern

Gentle Spin Schonschleudern

Drain Abpumpen

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted in these programmes.

20 - 60 °C

20 - 30 °C 20 - 40 °C

20 - 60 °C

20 - 30 °C

20 - 40 °C

—— ——

—— ———

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

3.0

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics.

4.0

Shortly worn outer clothing made of cotton, polyester , polyamide and blends

4.0

with cotton. Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and/or linen.

Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run overnight to additionally profit from the more favourable energy rates.

7.0

To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

This programme is particularly suitable to treat delicate lingerie (use of a

1.0

laundry net strongly recommended). Only woollens, labelled with the Woolmark and identified as machine

washable.

1.0

This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company

1.0

for handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme.

7.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

7.0

programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool”

1.0

programme. Drain only - no spinning. Alternative method of terminating programme after

“Rinse Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0620

Yes

❉

Yes

—

Yes

—

Yes

❉

Yes

—

Yes

—

Yes

—

Yes

— ——

❉❉❉❉❉ ❉❉❉

❉

❉ ❉

❉

❉ ❉

——

—— —

❉❉

——

—— ——

—— — — — —— — — — —— — — —

❉❉ ❉❉❉

——

❉

——

—

❉

——

❉

——

❉

——

❉

—

❉

———

❉

———

❉

—————

❉

❉❉❉

Whirlpool is a registered trademark of Whirlpool USA

❉❉ ❉❉

1000

❉❉ ❉❉

1000

❉❉

❉ ❉

1000

400

5019 301 06242

max.

max. max.

Black process 45.0° 150.0 LPI

30106242GB.fm Page 2 Friday, December 19, 2008 9:35 AM

CONSUMPTION DATA

Programme

Temperature

(°C)

White Cotton / Antibacterial 95 7.0 74

Colours

***

60 7.0 54 1.19 2:20

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

2.10 2:10

Colours 40 7.0 69 0.75 2:05

Synthetics 60 3.0 46

0.80 1:35

Synthetics 40 3.0 42 0.40 1:20 Daily load 40 4.0 48 0.50 1:00

Quick wash 30 4.0 48 0.25 0:30

Delicates 30 1.5 60 0.50 0:45

SuperEco 60 7.0 69 0.84 4:00

Lingerie 30 1.0 45 0.45 0:40

Wool 40 1.0 60 0.55 0:45

Handwash 40 1.0 45 0.55 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household

conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The

temperature

“Temperature” button. lights up; in case you want to set another spin speed,

press the “Spin” button.

“Start/Pause”

can be altered by pressing the

to the desired

button blinks.

spin speed

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for programmes “Cotton” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis.

not be used!

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rins e ho ld”, do not le av e the la undry to soak for too long.

Note:

time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the

Pause”

Chlorine or perborate bleaches must

The programme stops to “Rinse hold” at the

button blinks.

“Start/

Terminate the “Rinse hold” option:

• Press the terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selec ted, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start/Pause”

button; the programme will

button.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

• Press the The indication light next to the “Start Delay” button lights up and the countdown of the delay time begins. The dot between hours and minutes of the indicated delay time as well as the light of the start delay button will keep blinking until the programme starts.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay” ..before you press the “Start/Pause” button:

• Turn the programme selector to another position or press the

..after having pressed the “Start/Pause” button:

• Press the start delay time disappears from the display.

“Start/Pause”

“Reset”

button.

“Start/Pause”

button.

button for at least 3 seconds - the

button, the

PROGR AMME START

Open the tap and press the indication lamp next to the up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

an animation appears on the display

“Start/Pause”

button. The

button lights

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the programme. The light blinks.

2. Select the new programme, temperature, any options and another spin speed if you want.

3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start/Pause”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. Any

“Reset”

existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06242

Black process 45.0° 150.0 LPI