Whirlpool PWA 1051/P INSTRUCTION FOR USE

GB PWA 1051/P
Programme
Cotton with
prewash
Synthetic with
prewash
Delicate with
prewash
Cotton
Coloured cotton
Daily
Mixed Cotton /
Synthetic
Synthetic
Delicate
Wool
Handwash
Rinse + Gentle
Spin
Rinse + Spin
Spin
Gentle Spin
Drain
Bawełniane &
Pranie wstępne
Syntetyczne &
Pranie wstępne
Delikatne & Pranie
wstępne
Bawe³na bia³e
Bawe³na kolorowe
Mieszane
Syntetyczne
Delikatne Curtains and delicate clothing, dresses, skirts, shirts and blouses.
We³niane
Pranie rêczne
P³ukanie &
wirowanie delikatne
P³ukanie &
wirowanie
Wirowanie
Wirowanie delikatne
Wypompowanie
A CB
Care
Labels
Heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Heavily soiled curtains and delicate clothing, dresses, skirts, shirts and blouses.
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Slightly to normally soiled textiles made of cotton and/or synthetic.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled overalls and sportswear made of cotton, polyester, polyamide and blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
If you select „Rinse Hold“ do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select „Rinse Hold“ do not leave items to soak for too long. No spinning.
Programme for treating delicate laundry with starch or softener.
Programme for treating cotton or linen laundry with starch or softener.
Programme to spin cotton or linen laundry intensively with maximum spin speed.
Programme to spin delicate laundry gently with a restricted spin speed.
Drain only - no spinning. Alternative method of terminating programme after „Rinse Hold“.
D
Type of wash / Notes
A. Programme Selection Knob B. Temperature Selection Knob C. “Spin Speed Selection” Knob D. “On/Off” Button (W³./Wy³.)
Max. Load
Pre-
wash
5,0 Yes 1)Yes
2,0 Yes 1)Yes
1,5 Yes 1)Yes
5,0 Yes
3,0 Yes
3,0 Yes
2,0 Yes
1,5 Yes
1,5 Yes
1,0 Yes
1,0 Yes
2,0
5,0
5,0 1000
2,0 900
i : option / Yes: dosing required
1)
Do not use liquid detergents.
2)
For improved garment care, spin speed is restricted
to 900 rpm in this programme.
3)
For improved garment care, spin speed is zero
in this programme.
Detergents and Additives Special Options Tempera-
Max. 95 1000
Max. 60 900
Max. 40 900
i
Max. 95 1000
Max. 60 1000
Max. 60 1000
Max. 60 900
Max. 60 900
Max. 40 900
i
Max. 40 900
i
Max. 30
i
ture
°C
900
1000
Main
Softener Bleach Eco Intensive
wash
i i i i i
i
i
i i i i i
i
i
i
i
i
i
i
i
i
Eco P³ukanie
intensywne
p³ukanie
i i i
i i i
i i
i i i
i i
i i
i i
Rinse
Rinse
Hold
Stop
Max. Spin
Speed
rpm
2)
2)
2)
2)
2)
2)
3)
2)
2)
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
5019 812 10036
CONSUMPTION DATA
Temperature
Programme
Cotton 95 5,0 63* 1,80 2:05 Cotton 60 5,0 55 0,95 2:05 Cotton 40 5,0 55 0,55 2:05
Daily 40 3,0 49 0,48 1:00
Mixed Cotton / Synthetic 60 2,0 56 0,80 1:30
Synthetic 40 1,5 56 0,40 1:05
Delicate 40 1,5 60 0,55 0:45
Wool 40 1,0 60 0,50 0:40
Handwash 30 1,0 60 0,30 0:50
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The data on the “Energy Label” refer to the programme “Cotton 60°C”.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
PREPARATION OF WASH CYCLE SELECT THE DESIRED OPTION
1. Load the machine, close the drum doors and check that they are properly locked.
2. Add detergents and additives into the dispenser to no more then the “MAX” level
mark, as follows:
Programme with pre and main wash
Main wash programme without prewash
Fabric softeners and conditioners
Chlorine bleach
Stain remover agents
Anti-scale agents (if necessary)
3. Turn the programme selector knob to the desired programme.
4. Turn the temperature selector knob to the desired temperature.
5. Turn the spin speed selector knob to the desired spin speed. If the spin speed “ ” is selected, the final spin is cancelled, but not the intermediate spins. The programme ends with a drain cycle.
Selector
(°C)
Load
(kg)
Water
(l)
Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.
“Eco wash” button (Eco)
The duration of the wash is extended and the
temperature reduced to save energy maintaining good washing results.
“Intensive Rinse” button (P³ukanie intensywne)
One rinse cycle is added to ensure a more
intensive rinse.
This option is particulary suitable for areas with very soft water, washing baby linen and people with detergents allergies.
Energy
(kWh)
Approx. Programme
(hours : minutes)
Duration
“Rinse Hold” button Stop p³ukanie
The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid creasing and prevent colours from fading.
This option is particularly recommended for the “Synthetic” and “Delicate” programmes.
This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
Note: The programme selector knob stops on . Appliance in “Rinse Hold”:
Press the “Rinse Hold” button again: the
programme will terminate automatically with the selected spin cycle.
If you do not wish to spin the clothes, press the “On/Off” (W³./Wy³.) button, turn the programme selector knob to the “Drain” programme and press the “On/Off” (W³./Wy³.) button again.
PROGRAMME START
Turn on the tap and press the “On/Off” (W³./Wy³.) button. The indicator light of the “On/Off” (W³./Wy³.) button lights up. Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.
END OF WASH CYCLE
The programme selector knob is in the Stop
position.
1. Press the “On/Off” (W³./Wy³.) button to switch off the machine.
2. Cancel the option.
3. Turn the tap off.
4. Wait for the lid to unlock (about 1 minute).
5. Open the lid and the drum doors and unload the machine.
CHANGE THE PROGRAMME DURING THE WASH CYCLE
1. Switch off machine by pressing the “On/Off” (W³./Wy³.) button.
2. Select the new programme.
3. Start programme by pressing the “On/Off”
(W³./Wy³.) button again.
PAUSE/INTERRUPT A PROGRAMME
If, for any reason, you wish to interrupt the programme for a certain time and continue it later:
1. Press the “On/Off” (W³./Wy³.) button.
2. After the desired pause, press again the “ON/Off” (W³./Wy³.) button.
CANCEL PROGRAMME
1. Switch off the machine by pressing the “On/Off” (W³./Wy³.) button.
2. Set the programme selector to “Drain”.
3. Press the “On/Off” (W³./Wy³.) button again to start the “Drain” programme.
5019 812 10036
Loading...