Whirlpool PTL 1016D, PTL 1021 D INSTRUCTION FOR USE

GB

A. Programme selector
B. Time display
C. “Start delay” button
D. “Spin” button
E. “Start(Pause)” button
F. Programme sequence indicator
G. “Reset” button
H. “Door open” indication

Acustic noise level :
Washing - 59 dB(A) / 1 pW

Spinning - 1100 rpm, 74 dB(A) / 1 pW
1000, 900 rpm, 76 dB(A) / 1 pW
800, 700 rpm, 72 dB(A) / 1 pW

PROGRAMME CHART

B H

C

D

This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react

J

F

appropriately:
I. “Service” indication
J. “Water tap closed” indication

K

I

G

A

E

K. “Clean pump” indication

1)

Do not use liquid detergent for main wash if you

have activated prewash option.

2)

Do not use liquid detergent.

3)

For improved garment care, spin speed is restricted

to 400 rpm in this programme.

4)

Selectable for programmes Cotton 60°C and 40°C only.

Programme

Cotton

40 - 60 - 95°C

Eco Green

60°C

Synthetics

30 - 40 - 60°C

Delicates

30 - 40°C

Daily load

40°C

Quick wash 15’

30°C

Wool

Cold - 40°C

Handwash

30 - 40°C

Bawełniane

40 - 60 - 95°C

60°C

Syntetyczne

30 - 40 - 60°C

Delikatne

30 - 40°C

40°C

Prog. szybki 15´

30°C

We³niane

- 40°C

Pranie ręczne

30 - 40°C

Care

Labels

Max.
Load

- for temperature selection, respect the manufacturer's recommendations

kg

Normally to heavily soiled bed linen, table linen, towels and garments

5.5
made of cotton and/or linen.

Type of wash / Notes

on the care label

Detergents and Additives Special options

Pre-

wash

Yes

i

Heavily soiled and robust laundry made of cotton, synthetics and their
blends. Economical energy consumption by prolonged wash duration -

ideal to be run overnight to profit from more favourable energy rates. Avoid

5.5

noise of spinning at night by setting the spin speed to “0” and start spin

– Yes

programme in the morning, or by defining programme start with “Start
delay” accordingly. - For garments with a high share of synthetic fibres, we
recommend to use a laundry net.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

3.0
Trevira), polyamide (Perlon, Nylon).

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Yes

i

Yes

i

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes

Refreshes briefly worn outer clothing made of cotton, artificial fibers

3.0
and blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and

1.0
identified as machine washable.l.

Textiles made of linen, silk, wool and viscose marked as

1.0
“handwashable”.

– Yes

– Yes

– Yes

Main
wash

1)

1)

1)

Softener

i i

i i

i i

i i

i i

i i

i i

i i

Start
delay

Opóźnienie

startu

2)

2)

2)

2)

2)

2)

2)

2)

Pre-

Rapid

Cold

wash

Pranie

wstępne

i i

– –

Szybki

4)

Intensive

wash

Zimne
pranie

rinse

Płukanie

intensywne

i i i i

i i i i

Rinse

hold

Zatrzy-

manie

płukania

i i i i i i

i

– –

– –

–

i

i i i i

i

– – – –

– –

i

–

–

i i

i i

i i

–

i i

Spin

Wirowanie

Max.

Spin

Speed

rpm

max.

max.

max.

max.

max.

max.

max.

400

3)

Rinse & spin – 5.5 Same as the last rinse and the final spin in the “Cotton” programme. – –

Spin – 5.5

Drain – –

Yes = dosing required / i = optional

In this programme spinning is intensive. Same as the spin cycle in the
“Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme
after “Rinse hold”.

– – –

– – –

i i

– – –

i

i

– – – – –

– – – – – – –

i i i

max.

max.

i

5019 812 10058

CONSUMPTION DATA

Programme

Tempe-

rature

(°C)

Load

(kg)

Water

(l)

Energy

without “Rapid”

(kWh)

Approx. Programme Duration (hrs : min)

without “Rapid” with “Rapid”

Cotton 95 5.5 55* 1.75 2:05 –
Cotton** 60 5.5 48 0.93 2:45 2:15
Cotton** 60 2.75 33 0.77 2:15 ***

Cotton 40 5.5 48 0.65 2:10 1:50
Cotton** 40 2.75 33 0.55 1:50 ***

Eco Green 60 5.5 49 0.73 4:00 –

Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 40 0.50 1:50 0:59

Delicates 40 1.5 50 0.55 0:45 –

Daily load 40 3.0 40 0.45 1:00 –

Speed 15´ 30 3.0 30 0.15 0:15 –

Wool 40 1.0 55 0.55 0:45 –

Handwash 40 1.0 40 0.55 0:35 –

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programmes for Energy Label.
*** Automatic adaption of programme duration after detection of wash load.

PREPARATION OF THE WASH CYCLE

1. Load the machine, close the drum doors and check
that they are properly locked.

2. Add detergent and eventual additives as described on
the front page and in your Instructions for use.

3. Close the lid.

4. Turn the programme selector to the desired
programme and temperature. The time display
shows the duration of the chosen programme (in
hours and minutes), and the lamp next to the “Start
(Pause)” button blinks. The indication lamp of the
predefined spin speed lights up.

SELECT THE DESIRED OPTION(S)

Selecting or deselecting an option can be done at
any time during the programme. The option will be
applied as long as the corresponding programme
phase has not been executed yet.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt). Increases the cycle time by
approximately 20 min.

“Rapid” button

• Enables quicker washing by shortening the
programme duration.

• Recommendable for small loads or only lightly soiled
laundry.

“Cold wash” button

• Water is heated only up to 20ºC.

• Suitable for delicate laundry items with wash
temperature recommendation of max. 30ºC on the
care label.

• Selectable only on the lowest temperature step

“Intensive rinse” button

• The amount of water is increased to ensure a more

intensive rinse.

• This option is particularly suitable for areas with very
soft water, washing baby linen and people with skin
allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing
and prevent colours from changing.

• This option is particularly recommended for the
“Synthetics”, “Daily load” and “Delicates”
programmes.

• It is useful if you want to postpone spinning to a later
time, or if you want to drain out only.

• If you select “Rinse hold”, do not leave items to
soak for too long.

• As soon as the appliance stops in the rinse hold, the
“Rinse hold” lamp of the sequence indicator lights up
and the lamp next to the “Start(Pause)” button
blinks.

Terminate the “Rinse hold” option:

• Press the “Start(Pause)” button; the programme

will terminate automatically with the final spin cycle
for the present wash programme.

• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start(Pause)” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.

of each programme.

START DELAY

The “Start delay” button allows the user to run the
machine at his convenience, for example at night when
electricity is cheaper.

• Select programme, spin speed and options.

• Press the “Start delay” button several times to

select a delay time by 1 to 23 hours.

• Start the countdown of the “Start delay ” by pressing
“Start(Pause)”. the lamp over the “Start delay”
button blinks, and it goes off when the programme
starts.

• Once having pressed the “Start(Pause)” button,
the countdown of the time delay begins. The time
delay indication on the display disappears when the
programme starts and is replaced by the remaining time.

• After the “Start(Pause)” button has been pressed,
the number of hours preselected can be reduced by
pressing again the “Start delay” button.

To cancel the “Start delay”
..before you press the “Start(Pause)” button:

• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “Start(Pause)” button:

• Press the “Start(Pause)” button - the delay time

disappears from the display.

PROGRAMME START

Open the tap and press the “Start(Pause)” button.
The indication lamp next to the “Start(Pause)” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain. When the programme
phrase is finised, the corresponding indication goes out.

• Note: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel (Reset) a running programme before
the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the
interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start(Pause)” button to pause the
programme. The light flashes.

2. Select the new programme, any options and another
spin speed if you want.

3. Press the “Start(Pause)” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END

The “Reset” button cancels a programme before the
end. Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the lid can be
opened.

5019 812 10058