Whirlpool PDT 519 INSTRUCTION FOR USE

GB PDT 519

A. “On/Off” Button

During the selected washing programme the programme selector knob moves by steps clockwise through the phases prewash, main wash, rinse and spin. Each step takes from some seconds to several minutes.

i : option / Yes : dosing required

Programme Care Labels Type of wash / Notes

Cotton with prewash

Cotton

Synthetics

Cotton short Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Synthetics short

Delicate Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Wool

Rinse and Long spin

Long spin

Rinse and Short spin

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly soiled overalls and sportswear made of cotton, polyester, polyamide and blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

With this programme you can add starch and/or fabric softener.

–

The programme ends with an intensive spin cycle.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

–

With this programme you can add starch and/or fabric softener.

–

The programme ends with an gentle spin cycle.

Max. Load

5,0

2,0 –

2,5 –

2,0 –

1,5 –

1,0 –

5,0 –

5,0 – – – – – – 500 –

1,5 –

Detergents and Additives Special options Max.

Bleach Softener Main

i i

Wash

Yes Yes

Yes –

Yes – –

Pre-

wash

– – –

Half

Load

i i

Rinse

Hold

Temperature

Spin

Speed

rpm

500 Max. 95°

500 Max. 60°

500 Max. 40°

500 –

Selector

Programme

Selector

°C

Short spin

Drain

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

–

Drain only - no spinning. Alternative method of terminating the synthetic, delicate and wool

–

programmes and for premature removal of the laundry.

1,5 – – – – – – 500 –

– – – – – – – – –

5019 801 10020

CONSUMPTION DATA

Temperature

Programme

Cotton with prewash 95 5,0 80 2,00 130

Cotton 95 5,0 70 1,80 120

Cotton 60 5,0 70 1,20 120

Synthetics 60 2,0 60 0,90 85

Cotton short 40 2,5 65 0,70 75

Synthetics short 40 2,5 60 0,60 75

Delicates 40 1,5 80 0,60 70

Wool 30 1,0 80 0,60 65

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Open the tap.

2. Set the programme selector to the desired programme.

3. Turn the temperature selector to the desired temperature.

4. Special options can be selected.

5. Check that the door is well closed and turn on the washing machine by pressing the “On/Off” button. The indicator lights up, indicating that the washing machine is on.

Selector

(°C)

Load

(kg)

Water

(l)

SELECT ANY DESIRED OPTION

“Half Load” button

• Reduces water consumption, above all during

rinsing.

• Suitable for lightly-soiled laundry and small loads (max. 3 kg).

“Rinse Hold” button

• The laundry remains in the last rinse water

without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” and “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Energy

(kWh)

Approx. Programme

Duration

(minutes)

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the final spin cycle for the present wash programme. If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.

PROGRAMME CHANGE

To reselect a programme when a cycle has already begun:

1. Switch off the appliance by pressing the “On/Off” button.

2. Select the new programme.

3. Start the programme by pressing the “On/Off”

button.

END OF WASH CYCLE

1. At the end of the programme the programme selector moves to the stop position.

2. To unload the machine wait for the door to unlock (about 1 minute).

3. Switch off the appliance, open the door and take out the laundry.

4. Close the tap and leave the door ajar to allow the drum to dry out.

NOTES AND INDICATIONS FOR USE

• WATER LEVEL

To obtain low water consumption without compromising washing results the water level within the drum may not be visible.

• CLEANING THE PUMP FILTER

A regular filter check and eventual cleaning is advisable.

• WASHING CYCLE

During the washing cycle the turning of the drum is stopped several times for optimization of energy consumption.

• INCREASED SPINNING EFFICIENCY

During spinning the drum sterts and stops turning several times: in this way the washing machine performs spinning with increased efficiency.

5019 801 10020