Whirlpool PDT 1019 INSTRUCTION FOR USE

GB PDT 1019
A. “On/Off” Button (W³./Wy³.)
Programme Care Labels Type of wash / Notes
Cotton with prewash
Synthetics with
prewash
Delicate with prewash Heavily soiled curtains and delicate clothing, dresses, skirts, shirts and blouses.
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
A
During the selected washing programme the programme selector knob moves by steps clockwise through the phases prewash, main wash, rinse and spin. Each step takes from some seconds to several minutes.
i : option / Yes : dosing required
1)
For improved garment care spin speed is restricted to
800 rpm in this programme.
2)
For improved garment care spin speed is zero in this
programme.
Max.
Detergents and Additives Special options Max.
Load
kg
4,5
2,5
1,5
Softener Main
Wash
Yes Yes
i
Yes Yes
i
Yes Yes
i
Pre-
wash
Intensive
Rinse
Intensywne
p³ukanie
i i
i i
Rinse
Hold
Stop
p³ukanie
i
Temperature
Spin
rpm
Selector
°C
1000 Max. 95°
1)
800
800
1)
Max. 60°
Max. 40°
Programme
Selector
1
2
3
Cotton Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Cotton short Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Synthetics
Synthetics short Slightly soiled overalls and sportswear made of cotton, polyester, polyamide and blends with cotton.
Delicate Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Wool
Handwash
Rinse and Spin
Spin
Gentle Spin
Drain
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
With this programme you can add starch and/or fabric softener.
The programme ands with an intensive spin cycle.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating the synthetic, delicate and wool programmes and for
premature removal of the laundry.
5,0
3,0
2,5
2,5
1,5
1,0
1,0
5,0
Yes
i
Yes
i
Yes
i
Yes
i
Yes
i
Yes
i
Yes
i
i
i i
i i
i i
i i
i i
800
800
800
i
800
i
i
1000 Max. 95°
1000 Max. 60°
1)
Max. 60°
1)
Max. 60°
1)
Max. 40°
1)
Max. 40°
2)
Max. 30°
1000
5,0 1000
1,5 800
1)
5019 801 10015
4
5
6
7
8
9
10
A
B
C
D
CONSUMPTION DATA
Temperature
Programme
Cotton 95 4,5 49* 1,70 2:05
Cotton 60 5,0 46 0,95 2:20
Cotton 40 4,5 44 0,60 2:05
Synthetics 60 2,0 55 0,80 1:30
Synthetics 40 2,0 55 0,60 1:20
Delicates 30 1,5 60 0,50 0:45
Wool 30 1,0 60 0,30 0:40
Handwash 30 1,0 60 0,30 0:50
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.
1. Open the tap.
2. Turn the programme selector to the desired programme.
3. Turn the temperature selector to the desired temperature.
4. Turn the spin selector to the desired speed.
5. Special options can be selected.
6. Check that the door is well closed and turn on the washing machine by pressing the On/Off” (W³./Wy³.) button. The indicator lights up, indicating that the washing machine is on.
Selector
(°C)
Load
(kg)
Water
(l)
SELECT ANY DESIRED OPTION
“Intensive Rinse” button (Intensywne p³ukanie)
The amount of water is increased to ensure a
more intensive rinse.
This option is particulary suitable for areas with very soft water, washing baby linen and people with detergents allergies.
“Rinse Hold” button (Stop p³ukanie)
The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
This option is particularly recommended for the programme “Synthetics” and “Delicates”.
This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
Energy
(kWh)
Approx. Programme
(hours : minutes)
Duration
Terminate the “Rinse Hold” option:
Press the “Rinse Hold” button again; the
programme will terminate automatically with the final spin cycle for the present wash programme. If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.
PROGRAMME CHANGE
To reselect a programme when a cycle has already begun:
1. Switch off the appliance by pressing the “On/Off” (W³./Wy³.) button.
2. Select the new programme.
3. Start the programme by pressing the “On/Off”
(W³./Wy³.) button.
END OF WASH CYCLE
1. At the end of the programme the programme selector moves to the stop position.
2. To unload the machine wait for the door to unlock (about 1 minute).
3. Switch off the appliance, open the door and take out the laundry.
4. Close the tap and leave the door ajar to allow the drum to dry out.
NOTES AND INDICATIONS FOR USE
• WATER LEVEL
It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.
• SPIN SPEED CONTROL
Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and machine damage and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.
• MOTOR NOISE
The running noises of the new, electronically­ controlled motor are not the same as the ones you are used to from your old appliance. Don't be surprised - modern technology has a modern sound.
• CLEANING THE FILTER
To ensure an impeccable function of the pump, check the filter regularly and clean it if necessary.
5019 801 10015
Loading...