Whirlpool ESN 4483/C WS INSTRUCTION FOR USE

ESN 4483 PRODUCT DESCRIPTION SHEET

CH

OVEN

First...Last: Runner positions

1. Control panel

2. Upper/grill heating element

3. Oven light

Last

First

Accessories:

•Grid

• Baking tray

• Drip tray

4. Lower heating element (not visible)

5. Oven door hinges

6. Oven cool door

1. Oven functions selector knob

2. Oven thermostat knob

3. Thermostat indicator light

4. Cooktop control knobs

5. Cooktop “ON” indicator light

5019 410 53271

CONTROL PANEL

OVEN FUNCTIONS

0 Off

Oven light

BOTTOM HEATING FUNCTION

Use:

- To finish baking fruitcakes or cheesecakes.

- To thicken sauces.

Use the lower heating function for the last 10
or 15 minutes of cooking time.

STATIC FUNCTION

Use when all the food is on the same runner
level.

- Pre-heat the oven to the required cooking
temperature and place the food inside as
soon as the red thermostat indicator light
switches off.

SWITCHING THE OVEN ON

- Ideally, the shelf should be on the second
runner level when using the static function.

GRILL FUNCTION

Use the grill function to cook small pieces of
meat (steaks, sausages) and for making toasts.

- The oven door must be closed during the
cooking cycle.

- Preheat the grill for about 5 minutes.

- Arrange the meat on the grid with the drip

tray underneath. Pour water in the drip tray
to cover the bottom to reduce smoke and
fat spatters.

- Turn over the meat about half-way thro ugh
cooking time.

Turn the selector knob to the required symbol.

The oven light switches on.

• Tur n t he th er most at knob clockwise to the
required temperature.

The red thermostat indicator light switches on.

• When the required temperature is
reached, the red thermostat indicator light
switches off.

End of cooking cycle:

• Return the knobs to the OFF position (0 - •)..

HOW TO USE THE COOKTOP CONNECTED TO THE OVEN

The control panel is provided with four
adjustable knobs controlling the hotplates.
The double zone control knobs (4) and (5) are
marked from 0 to 12 and the symbol .

The control knobs (6) and (7) are marked from
0 to 12.

Note: the yellow indicator light on the panel
switches on every time one of the hotplates is
in operation.

SWITCHING ON THE COOKTOP:

Follow the instructions provided with the
cooktop.

Importante:

• When the hotplates are used for the first
time, turn the selector knobs to position
(12) and leave on for approx. 3 minutes,
without anything on the hotplates.

• Never operate the hotplates without
anything on them.

• Use pots and pans that are suitable for
electric hotplates, with thick base.

• The diameter of the base of pots and pans
must be the same or slightly greater than
that of the hotplate..