Whirlpool AWZ EXPERT AI INSTRUCTION FOR USE

AWZ EXPERT AI

Programmes

Cotton

Max. 5 kg

Easy care

Max. 2.5 kg

Airing

Time

Programmes

Options

Extra dry

Cupboard dry plus

Cupboard dry

Iron dry

Cupboard dry plus

Cupboard dry

Iron dry

Laundry is aired for 30 minutes without heating.

Completes drying or dries single items (suitable for all fabrics).

Gentle

Reduces Drying

Intensity

(recommended

for delicate

items)

Rapid

Shortens

Drying Duration

(recommended

for small items)

max 3.5 kg

Buzzer

Signals/Sounds

end of Drying

Cycle at

Intervals

Start Delay

Delays the

Drying Cycle

start

----

Indicative

Drying Time

Spin Speed

Washing Machine

rpm 800

120’

110’

85’

80’

65’ 90’

55’ 75’

30’ 40’

20’ 35’

15’ 30’

rpm

1000

20’ 35’

15’ 30’

10’ 25’

rpm

1200

100’

70’

60’ 90’

50’ 75’

40’ 65’

Max

Load

3.5

5.0

3.5

5.0

3.5

5.0

3.5

5.0

1.0

2.5

1.0

2.5

1.0

2.5

--------

-- ----

QUICK REFERENCE GUIDE

please also carefully read: the Instructions for Use and Installation Manual.

Starts the drying cycle. The indicator lamp lights up when the dryer is on.

Delays the drying cycle start from 1 to 9 hours.

To select the start delay: turn the programme selector knob to the desired programme and press the start delay button: with each touch of the button, drying cycle start is delayed by 1 hour. Press the Start button. To cancel or to change the previous

Start delay

Count-down

Filter

Drying

Airing

set time delay: turn the programme selector knob to “0” or open the door. To select the time, press the Start Delay button. Press the Start button to restart the cycle. The remaining time indication time until start of drying cycle will be reduced in 1 h steps.

Shows the time remaining until drying cycle start.

During the count-down the drum will turn from time to time to redistribute the laundry

The indicator lamp lights up when the filter needs cleaning.

filter at the end of every cycle.

PROGRAMME SEQUENCE INDICATORS

The programme sequence indicator lamps show the status or the progress of the drying cycle.

End

Clean the

Gentle

and

cannot be selected together.

Rapid

Anti-crease

5019 100 18226

PREPARING THE LAUNDRY SELECTING A PROGRAMME AND OPTIONS

1. Check that all fastenings are closed and that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to make sure it doesn’t become tangled.

Sort laundry as follows: A) By care symbols

(on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced drying intensity only

Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dried exceeds dryer capacity, separate laundry according to weight (e.g. towels from thin underwear).

C) By type of fabrics

Cotton/linen

table linen made of cotton or linen.

Synthetics/Easy Care

overalls, etc. made of polyester or polyamide, as well as cotton/synthetic mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry:

stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.

Important: only use specific indicated dryersafe additives

treated with stain remover thoroughly in plenty of water before drying.

dryer-safe plastic items articles contaminated with vegetable oil

dryer.

: Towels, cotton jersey, bed and

: Blouses, shirts,

Woollens, silk, nylon

and rinse items that have been

Only use specific indicated

and

never

rubber or

dry

in the

• To select a programme, turn the programme selector knob.

• To select an option (if available), press the corresponding button. The indicator lamp above the button confirms that a selection has been made. An alarm sounds if an incorrect selection is made (incompatible options).

• Press the button again to cancel the option.

STARTING AND COMPLETING A PROGRAMME

1. Having selected the desired programme and options, press the Start button.

If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 60 min. The drum rotates at regular intervals, preventing the laundry from creasing.

2. On completion of the programme, set the programme selector knob to position “0”. The dryer indicator lamp “Start” switches off.

CHANGING A PROGRAMME

When changing the programme during the drying cycle, the dryer stops. The indicator lamp of the Start flashes.

To operate the new programme, press the Start button again.

INTERRUPTING A PROGRAMME

To interrupt the dryer during operation

1. Set the programme selector knob to “Airing”.

2. Press the Start button. Wait at least 5 minutes before opening the

door to allow the dryer to cool down. For your safety the programme stops

automatically if you open the door.

3. To restart, after door opening, close the door and press the Start button again.

FILTER

Clean the lint filter at the end of every drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Remove lint using a soft brush or your fingertips.

4. Push the filter firmly back into place.

BUILT-IN INSTALLATION

1. It is recommended to not remove the work-top.

2. Connect the dryer to an external ventilation system in order to prevent steam from damaging your furniture during the years.

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our AfterSales Service, make the following checks to try and remedy the problem:

Drying takes too long / laundry is not dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet (Washing

machine spin speed less than 800 rpm)?

• Is the lint filter dirty (filter indicator lamp on)?

The dryer does not operate: (following a power failure and/or interruption

to the mains supply, always press the Start button).

• Is the plug properly inserted into the mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door well closed?

• Has the programme been selected?

• Has the start delay option been selected?

• Has the

Lint filter indicator lamp light on:

• Is the lint filter clean?

• Is the vent hose blocked?

Start

button been pressed?

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee).

Please specify:

• the nature of the fault.

• the dryer type and model.

• the service code (the number after the word

Service on the adhesive rating plate) on the right-hand side when the door is open.

• your full address and phone number.

5019 100 18226