WHIRLPOOL AWZ 8CD UK.2 Daily Reference Guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
EN
Quick guide
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
CONTROL PANEL
1 ON/OFF button (Reset if long pressed)
2 Programme button
3 Programme selection Knob (rotate to
select / press to conrm)
4 Start/Pause button
5 Programmes area
6 Display
Options Buttons
7 Settings
8 Fresh Care+
9 Keys Locked
10 Start Delay
11 Drying Time
12 Drying Level
13 Cycle Options
Before using the appliance carefully read the Safety Instructions.
COTTON 2:20
6.
5.
3.
1. 10.2. 11.8. 13.7. 129. 4.
Refer to Troubleshooting section.
FIRST TIME USE
When starting the appliance for the rst time, the control panel
will show the set language menu automatically. Turn the knob
to visualize the languages available in the machine. Press the
knob to conrm the selected languages.
Make sure that the water tank is correctly inserted. Make sure
that the drain hose on the back of the dryer is xed correctly,
either to the dryer’s water tank, or to your domestic sewage
system. Should you wish to change the opening side of the
door, please contact our After-sales Service. (See phone number
in the warranty booklet).
NAVIGATION FUNCTIONS SELECTION
The navigation can be made when the LED of the required
function is on. Browse the function by rotating the knob to
visualise the possible selections on the display.
Press the knob to conrm.
The machine proposes a path for selecting programmes and
options, with starting in sequence of the functions LEDs.
However, the programmes and options can be selected
autonomously by simply pressing the programmes button or
the required option.
DAILY USE
Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.
Remember to clean your lters after each drying cycle. (Refer
to section Care & Maintanence).
1. Open the door and load garments. Always refer to instructions
on clothing labels and the max loads indicated in the programme
section. Empty pockets. Make sure garments do not get caught
between the door and/or the door lter.
2. Close the door.
3. Press the button On/O.
4. Select the required programme according to the type of laundry.
The LED of the button P must remain on. Rotate the knob to
select the required value and then press the knob to conrm.
5. Select the options, if necessary. If the options have any
submenus, they can be browsed by rotating the knob and
then conrmed by pressing the knob.
6. To start the cycle, press the Start/Pause button.
7. At the end of the drying cycle, a buzzer will beep. The display
signals the end of the cycle. Pulling out the load immediately
helps to prevent the formation of creases on laundry.
8. Turn the machine o by pressing the button On/O, open the
door and pull clothing out. If the machine is not switched o
manually, after about a quarter of an hour from the cycle end, the
appliance turns o automatically to save energy.
If this last stage is not carried out immediately, some machines
and/or some programmes/options are equipped with Crease Care
system. For some hours, after the end of drying, the drum rotates at
regular intervals to prevent the formation of creases.
In case of power failure, it is necessary to press the button Start/
Pause to restart the cycle.
Ecomonitor
This indicator shows the energy consumption level according to
the programme and the options set. The consumption is
proportional to the lines on the display,by the ecomonitor icon.
Drum light (If present)
Some models are equipped with drum internal light to make use of the
dryer easier. No setting is required. For instance, the light goes on when
opening the door.
OPENING OF THE DOOR DURING THE CYCLE
During operation, it is possible to open the door. After having closed
it, press the button Start/Pause again to restart the dryer.
SETTINGS
The various settings can be selected with the modes described in
"Navigation".
Language shows the languages available on display.
Keys Tone allows adjusting or removing the setting sounds of the
machine keys.
Cycle End Alert allows adjusting or removing the cycle end sounds
of the machine.
Display Contrast allows adjusting the display brightness
Remember last used cycle selects the last used cycle automatically
when starting the machine, otherwise it restarts from the default
programme.
Eco Mode allows adjusting the machine switching o after the cycle
end.
Factory Settings allows resetting the factory settings.
*MAX LOAD 8 Kg (Dry load)
CARE LABEL
Always check the care labels, especially when placing garments in
the tumble dryer for the rst time. Below are the most commonly
used symbols:
May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.
h
The duration of these programs will depend on the size of
the load, types of textiles, the spin speed used in your washer
and any extra options selected. In machines equipped with
display, the duration of the cycles is shown on the control
panel. The remaining time is constantly checked and adjusted
during the drying cycle to show the best possible estimate.
P PROGRAMS
Eco Cotton kg Max*
Standard cotton programme, suitable to dry normally wet
cotton laundry. Most ecient programme in terms of energy
consumption for drying cotton laundry. The values on the Energy
Label are based on this programme.
Cotton kg Max*
For drying cotton laundry.
Mixed kg 4
This programme is ideal for drying cotton and synthetic
fabrics together.
Synthetics kg 4
For drying laundry made of synthetic bres.
Delicates kg 2
For drying delicate laundry which needs gentle treatment.
Wool kg 1
Programme for drying wool clothing. It is advisable to turn
the garments inside out before drying. Leave to dry naturally the
heaviest edges that are still damp.
Coloured kg Max*
Programme for gentle drying suitable for coloured garments.
Rapid 30' kg 0,5
Ideal for drying cotton garments spun at high speed in the
washing machine.
Shirts kg 3
This is a programme for Shirts made from cotton or cotton
blend/synthetics.
Easy Ironing
This cycle allows to extend the bres of garments thus
making ironing and folding easier. Do not use in case of
garments that are still wet. Suitable for small loads of cotton
textiles or cotton blends.
Refresh
A short programme suitable for refreshing bres and
garments by means of fresh air. Do not use with garments that are
still wet. It can be used on with any load size but is more eective
with small loads. The cycle duration is about 20 minutes.
Specials
To set one of the following programmes, use the knob for
selecting and conrming the position of the "Special Programs".
The programmes list is accessed by rotating the knob. The
display shows the names of the available programmes. Conrm
the required programme by pressing the knob.
• Jeans kg 3
For drying cotton jeans-wear and garments made of robust
cotton, like denim, such as trousers and jackets.
• Miniload kg 1
Economic drying of small laundry loads.
• Sport kg 4
For drying sports garments made of synthetics or cotton.
• Silk kg 0,5
Gentle drying of silk garments.
OPTIONS BUTTONS
These buttons serves to personalise the selected programme
according to personal requirements. Not all options are available
for all programmes. Some options are incompatible with the
ones previously set. The buzzer and/or blinking indicators
will signal the incompatibility. If the option is available, the
option indicator will stay on. Some options may be kept in the
memory of the programme if selected in the previous drying.
Some options may be kept in the memory of the programme if
selected in the previous drying of the same programme.
• Downjackets kg 2,5
To dry down jackets, giving their natural softness back (2
jackets).
OPTIONS
After selecting the programme, the various options can be
set, if necessary.
Drying Level
Each programme has a pre-set drying level. In some
programmes, the residual moisture on garments can be set.
Pressing the related option button, the LED goes on. Turn the
knob to browse among the levels available for each programme.
Press the knob to conrm.
Iron Dry: a very delicate ironing. Suitable for making ironing
of garments easier immediately after the end of the cycle.
Hanger Dry: a level intended for delicate garments ready to
be hanged.
Cupboard Dry: the garments are ready to be folded and put
away
Extra Dry: used for garments to be worn at the end of the
cycle.
Drying Time
In some programmes, the drying time can be set. Pressing
the related option button, the LED goes on. Turn the knob to
visualize the times available for each programme. Press the knob
to conrm.
Start Delay
Pressing the related option button, the LED goes on. Turn the
knob to browse among the times available for each programme.
Press the knob to conrm.
In case of door opening, after closing, it is necessary to press the
button Start/Pause again.
Fresh Care+
If garments are left inside the drum after the end of the
cycle, they are subject to bacterial proliferation. This option allows
to prevent this proliferation by controlling the temperature and
the rotation of the drum. This treatment has a max. duration of 6
hours after the end of the programme set. This option remains in
memory if selected in the previous drying.
If this option is used together with the Start Delay, a crease treatment
(a periodic rotation of the drum) is added in the Start Delay phase.
Keys Locked
This option makes all machine controls inaccesible, except
the button On/O.
When the machine is on:
• to activate the option, keep the button pressed until the
indicator goes on.
• To disable the option, keep the button pressed until the
indicator goes o.
This option remains in memory if selected in the previous drying.
Cycle Options
This buttons serves to access a menu of available options (see
next options). After having pressed the button, turn the knob
to select the option and press it to conrm.
• Rapid
Enables quicker drying.
• Gentle
Enables a more gentle treatment of the laundry by
reducing the drying temperature.
• Cycle end signal
This option activates a prolonged buzzer at the end of the
cycle. Enable it if you are not sure to hear the normal sound at the
end of the cycle.
This option remains in memory, if selected in the previous drying.
Loading...