Whirlpool AWO/D 7086/-30, AWOD 6528 INSTRUCTION FOR USE

30106368GB.fm Page 1 Friday, April 2, 2010 5:44 PM

GB PROGRAMME CHART

A. “Door open” indication
This washing machine is equipped with

automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

C

D

J

H

}

FE

E. Programme selector
F. “Start (Pause)” button

A

G. “Variable spin” button

B

H. Programme sequence indicator (over

the line) and Start delay indicators
(under the line)

I

G

I. “Reset” button
J. “Start delay” button

Programme

Cotton

60 - 95 °C

Cotton

40 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin

Spin Centrifuga

Drain Scarico acqua

optional / Yes : dosing required

❉

:

1)

For improved garment care, spin speed is restricted in these programmes.

Cotone

60 - 95 °C

Cotone

40 °C

60 °C

Sintetici

30 - 40 - 60 °C

Delicati

30 - 40 °C

40 °C

30 °C

Lana

A freddo - 40 °C

Lavaggio a mano

40 °C

Lingerie

30 °C

Risciacquo &

Centrifuga

Care

Labels

—

—
—

Max.
Load

kg

- Respect the manufacturer’s recommendations on the care label.

6.0
Normally to heavily soiled bed linen, table linen and underwear, towels,

shirts etc. made of cotton and linen.

5.0
Normally to heavily soiled and robust bed linen, table linen and

underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal

6.0

to be run overnight to additionally profit from the more favourable energy rates. To
avoid noise of spinning at night, set spin speed to “0” and start spin programme in
the morning, or define programme start with “Start Delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

2.5
Trevira), polyamide (Perlon, Nylon) or blends with cotton.

1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and

3.0
blends with cotton.

Only woollens, labelled with the Woolmark and identified as machine

1.0
washable.

1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”.
This programme is particularly suitable to treat delicate lingerie (use of a

1.0
laundry net strongly recommended).

6.0

Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

6.0

programme.

6.0

The water is drained out only without any spinning.

Ty pe of w a s h/ No t e s

Detergents and additives Special options

Pre-

Main
wash

Ye s

Ye s

Ye s

Ye s

Ye s

Ye s

Ye s

Ye s

Ye s

Softener Start

❉❉❉❉❉❉ ❉

❉❉

❉❉❉❉❉❉ ❉

❉❉❉

❉❉

❉❉

❉❉

❉❉

❉❉

❉❉

wash

❉

—

❉

❉

—

—

—

—

—

——

—— —
—— —

delay

Avvio

ritardato

Pre-

Eco

Eco

Intensive

rinse

Risciacquo

intensivo

❉

wash

Pre-

lavaggio

——

—— —

——

❉❉ ❉

—— — —

—— — —

—— — —

—— — —

——

—— — —

❉

—— — — — —

❉

❉

Whirlpool is a registered trademark of Whirlpool USA

Max

Easy

ironing

Stiro

facile

—

—

Var iable

spin

Centrifuga

variabile

❉

❉

❉

❉

❉

❉

❉

❉

Spin

Speed

rpm

max.

max.

1000

1000

max.

max.

1000

400

400

max.

max.

1)

1)

1)

1)

1)

5019 301 06368

Black process 45.0° 150.0 LPI

30106368GB.fm Page 2 Friday, April 2, 2010 5:44 PM

CONSUMPTION DATA

Programme

Cotton 95 6.0 59
Cotton 60 6.0 49

Cotton with “Eco”

Cotton 40 5.0 56 0.70 2:00

SuperEco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50
Synthetics 40 2.5 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:45
Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.40 0:30

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Lingerie 30 1.0 45 0.40 0:36

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

*

Reference Programme for Energy Label.

**

**

Te m p e r a t u r e

(°C)

60 6.0 49 0.78 4:00

ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as
described in your Instructions for Use.

Close the door and turn the programme selector to the
desired programme and temperature. The indication lamp
next to the

“Start (Pause)”

button blinks.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective
indication lights up.

When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when
activating the “Prewash” option.

“Eco” button

• With a modified temperature profile and a prolonged
wash duration, the optimum combination of good wash
result and lower energy consumption is achieved.

Load

(kg)

Wat er

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Easy ironing” button

• Reduces creasing by an increased water quantity and a

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

Energy

(l)

(kWh)

1.90 2:00

*

1.02 2:20

0.80 1:35

*

water, washing baby linen and helps people with allergies.

very gentle spin.

cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.

Approx. Programme Duration

(hours : minutes)

START DELAY

The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the start delay.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time
by 1, 3, 6, 9 or 12 hours.

• Press the
The “Start delay” indication blinks and the countdown
of the delay time begins.

• When the programme starts, the start delay indicator
light goes off and is replaced by the programme
sequence indication.

•After the
the number of hours preselected can be reduced by
pressing again the “Start delay” button.

To cancel the “Start delay”
...before you press the “Start (Pause)” button:

• Turn the programme selector to another position or
press the

...after having pressed the “Start (Pause)” button:

• Press the
start delay indicator light goes off.

“Start (Pause)”

“Start (Pause)”

“Reset”

“Reset”

button.

button has been pressed,

button.

button for at least 3 seconds - the

PROGRAMME START

Open the tap and press the
indication lamp next to the
up. The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.

• When the programme phase is finished, the
corresponding indication goes off.

“Start (Pause)”

“Start (Pause)”

button. The

button lights

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the
programme. The light blinks.

2. Select the new programme (with temperature), any
options and another spin speed if you want.

3. Press the
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.

“Start (Pause)”

“Start (Pause)”

button to pause the

button again. The new

RESET A RUNNING PROGRAMME BEFORE
THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. The

“Reset”

water is drained out; it may last a while until the door
can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 06368

Black process 45.0° 150.0 LPI