How it Works
Whirlpool
Loading...
AWO/D 6330
INSTRUCTION FOR USE
1 pgs54.43 Kb0
INSTRUCTION FOR USE
2 pgs1.01 Mb0

Whirlpool AWO/D 6530, AWO/D 6330 INSTRUCTION FOR USE

30106359GB.fm Page 1 Thursday, March 11, 2010 11:57 AM
GB PROGRAMME CHART
A. “Door open” indication This washing machine is equipped with
automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
C D
H
}
A B
E. Programme selector F. “Start (Pause)” button G. “Spin” button H. Programme sequence indicator
B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication
Programme
White Cotton /
Antibacterial
Cotton
Synthetics
Daily load
Quick wash
Delicates
Baby
Lingerie
Wool
Handwash
Rinse & Spin
Spin
Gentle Spin
Drain
optional / Yes : dosing required
❉
:
1)
For improved garment care, spin speed is restricted in these programmes.
Bawełniane
Syntetyczne
Codzienne
Delikatne
Ubranka dziecięce
Bielizna
Wełniane
Płukanie i wirowanie
Wirowanie
Delikatne wirowanie
Wypompowanie
Te m p e -
rature
70 - 95 °C
20 - 60 °C
20 - 60 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
40 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
—— ——
—— ——
Care
Labels
E
Max
Load
- Respect the manufacturer’s recommendations on the care label
kg
Normally to heavily soiled bed linen, table linen and underwear,
7.0
towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria
7.0
removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of polyester
3.0
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetics.
4.0
Shortly worn outer clothing made of cotton, polyester,
4.0
polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
1.5
Normally soiled baby clothes, baby quilts, beddings and blankets as well as washable toys made of cotton and/or linen.
6.0
In this programme, the washing liquid is rinsed out even more thoroughly and thus helps to protect sensitive baby skin.
This programme is particularly suitable to treat delicate lingerie
1.0
(use of a laundry net strongly recommended). Only woollens, labelled with the Woolmark and identified as
machine washable.
1.0
This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.
Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The
1.0
Woolmark Company for handwashable wool.
Same as the last rinse and the final spin in the “Cotton” programme.
7.0
In this programme spinning is intensive. Same as the spin cycle in
7.0
the “Cotton” programme. In this programme spinning is gentle. Same as the spin cycle in the
1.0
“Wool” programme. Drain only - no spinning. Alternative method of terminating
7.0
programme after “Rinse Hold”.
Type of wash/Notes
I. “Reset” button
I
F
Detergents and additives Special options
Pre-
wash
J
K
Main wash
Ye s
❉
Ye s
❉
Ye s
—
Ye s
—
Ye s
❉
Ye s
❉
Ye s
—
Ye s
—
Ye s
—
——
L
Softener Eco
Eco
❉❉ ❉ ❉ ❉ ❉ ❉ ❉
❉❉ ❉ ❉ ❉ ❉ ❉ ❉
——
❉
——
❉
—
❉
❉❉ ❉ ❉
——
❉
——
❉
——
❉
——
❉
G
Pre-
wash
Wstępne
❉❉
—— ——— —— ——— —— ———
J. “Start delay” button K. “Temperature” button L. Display
Start
delay
Opóźnienie
startu
Easy
ironing
Bez
zagnieceń
❉❉❉❉❉
❉
——
——
——
❉
❉
❉
❉ ❉
❉
❉
——
——
——
— ———
——— —————
Intensive
rinse
Super
płukanie
Rinse
hold
Stop
płukanie
Variable
spin
Predkość
wirowania
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉ ❉
Whirlpool is a registered trademark of Whirlpool USA
Max Spin
Speed
rpm
max.
1000
max.
max.
1000
max.
1)
400
1000
1)
400
max. max.
❉
❉
1000
5019 301 06359
1)
1)
1)
1)
Black process 45.0° 150.0 LPI
30106359GB.fm Page 2 Thursday, March 11, 2010 11:57 AM
CONSUMPTION DATA
Programme
White Cotton/Antibacterial 95
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The time indicated on the display can deviate from the ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label.
Cotton
Cotton with “Eco”
Cotton 40 Synthetics 60 3.0 50** 0.80 1:35 Synthetics 40 3.0 46 0.50 1:20 Daily load 40 4.0 45 0.50 1:00
Quick wash 30 4.0 45 0.40 0:30
Delicates 30 1.5 60 0.50 0:45
Baby 40
Lingerie 30 1.0 45 0.40 0:36
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
***
Te m p e r a t u r e
(°C)
60 7.0 54 1.19 2:20 60 7.0 54 0.91 4:00
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.
1. Turn the
2. The
3. The indication lamp of the predefined
programme selector
programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The
temperature
“Temperature” button.
lights up; in case you want to set another spin speed, press the “Spin” button.
“Start (Pause)”
can be altered by pressing the
to the desired
button blinks.
spin speed
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Eco” button
• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption can be achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.
Load
Water
(kg)
7.0 74** 2.10 2:10
7.0 69 0.75 2:10
6.0 86 0.80 2:26
values in the table, because it takes into account the household conditions applicable at that time.
• Do not use liquid detergent for the main wash when
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
• Increases the water quantity and the clothes are spun
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the
• It is particularly useful if you want to postpone spinning
• If you select “Rinse hold”, do not leave the laundry to
Terminate the “Rinse hold” option:
• Press the
• If you do not wish to spin the clothes, turn the
Energy
(l)
(kWh)
activating the Prewash option.
“Daily load” programmes to make ironing easier.
very gently.
water, washing baby linen and helps people with allergies.
progressing to the final spin cycle to avoid creasing and prevent colours from changing.
programmes “Synthetics”, “Daily load” and “Delicates”.
to a later time, or if you want to drain only.
soak for too long.
The programme stops to “Rinse hold” at the
Note:
time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the
(Pause)”
will terminate automatically with the final spin cycle for the present wash programme.
programme selector knob to the “Drain” programme and press the
button blinks.
“Start (Pause)”
Approx. Programme Duration
(hours : minutes)*
button; the programme
“Start (Pause)”
button.
“Start
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay time by 1 to 23 hours;
• Press the The indication light next to the “Start delay” button lights up and the countdown of the delay time begins. The dot between hours and minutes of the indicated delay time as well as the light of the start delay button will keep blinking until the programme starts.
• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.
• Once having pressed the number of hours preselected can be reduced by pressing and holding the “Start delay” button. From 1 hour on, the delay time can also be reduced by minutes.
To cancel the “Start delay” ...before you press the “Start (Pause)” button:
• Turn the programme selector to another position or press the
...after having pressed the “Start (Pause)” button:
• Press the start delay time disappears from the display.
“Start (Pause)”
“Reset”
“Reset”
button.
“Start (Pause)”
button.
button for at least 3 seconds - the
button, the
PROGRAMME START
Open the tap and press the indication lamp next to the up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,
an animation appears on the display
“Start (Pause)”
“Start (Pause)”
button. The
button lights
.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the programme. The light blinks.
2. Select the new programme, temperature, any options and another spin speed if you want.
3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
“Start (Pause)”
“Start (Pause)”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds. Any
“Reset”
existing water is drained out before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06359
Black process 45.0° 150.0 LPI
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use