Whirlpool AWO/C 60100, AWO/C 60120 INSTRUCTION FOR USE
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage
and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Care
Programme
Labels
Cotton/
Antibacterial
95 °C
Cotton
40 - 60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Rinse & Spin
– 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –
H
C
D
A
B
J I
E
Max.
Load
kg
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or
stains, you can add an oxygenbased bleach additive which can be used at 95°C.
6.0
This programme eliminates bacteria, ensuring sanitization of your laundry. The bacterial
removal efficiency has been tested following a similar methodology to the NF EN 13697
standard of Nov. 2001
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
6.0
of cotton and linen.
Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.)
3.0
or their blends with cotton.
1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their
3.0
blends. Effective one-hour programme. Make sure to wash only similar colours together in one
wash load.
Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.
3.0
Brief programme to refresh your laundry.
1.0 Only woollens, labelled with the Woolmark and identified as machine washable. – Yes
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
1.0
Care programme with a very gentle spin.
This programme is particurarly suitable to treat delicate lingerie (use of laundry net
1.0
strongly recommended).
- Respect the manufacturer's recommendations on the care label
Type of wash / Notes
F
Detergents and Additives Special options Max
Pre-
wash
– Yes
– Yes
– Yes
– Yes
Main
Wash
Yes
Yes
Yes
Yes
E. Programme selector
F. “Start (Pause)” button
G. Spin speed selector
H.
Programme sequence indicator
and Start delay indication
I. “Reset” button
J. “Sta
rt delay” button
G
Softener Start
delay
Rapid Pre-
wash
–
–
– –
– – –
– – –
– – –
– – –
– –
Intensive
Rinse
rinse
hold
–
Spin
Spin
Speed
rpm
Max.
Max.
Max.
1000
Max.
Max.
1000
400
400
Max.
1)
1)
1)
1)
Spin
Short spin
Drain
: option / Yes : dosing required
1)
For improved garment care spin speed is restricted in these programmes.
– 6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –
– 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – –
– – Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. – – –
– – – –
– – – –
– – – – – –
Whirlpool is a registered trademark of Whirlpool USA.
Max.
1)
1000
5019 301 01207
CONSUMPTION DATA
Programme
Cotton/ Antibacterial 95 6.0 59* 1.90 2:00 -
Cotton ** 60 6.0 49 0.90 4:00 2:30
Cotton ** 60 3.0 37 0.69 2:20 ***
Cotton 40 6.0 54 0.65 2:45 1:45
Cotton ** 40 3.0 37 0.58 2:30 ***
Synthetics 60 3.0 50* 0.70 1:30 1:09
Synthetics 40 3.0 46 0.50 1:15 0:54
Delicates 30 1.5 50 0.50 0:45 -
Daily load 40 3.0 45 0.45 1:00 -
Quick wash 30 3.0 40 0.40 0:30 -
Wool
Handwash 40 1.0 45 0.60 0:40 -
Lingerie 30 1.0 45 0.50 0:36 -
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin
speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that
time (see also “Troubleshooting Guide” in your Instructions for Use).
*
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference programmes for Energy Label.
*** Automatic adaptation of programme duration after detection of wash load
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Temperature
(°C)
40 1.0 55 0.60 0:45 -
Load
(kg)
Water
(l)
Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
• Turn the programme selector to the desired
programme and temperature.
• The indication lamp next to “Start(Pause)”
button blinks.
• The indication lamp of the predefined spin speed
lights up.
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective
indication lamp lights up.
If the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of options
are deselected automatically.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for small loads or only lightly
soiled laundry.
“Prewash”
button
Energy
(kWh)
without “Rapid”
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next
to the “Start(Pause)” button blinks.
Terminate the “Rinse hold” option:
• Press the “Start(Pause)” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start(Pause)”
button.
Approx. programme duration
(hours : minutes)
without “Rapid” with “Rapid”
• Only for heavily soiled loads (for example sand,
granular dirt). Increases the cycle time by
approximately 15 min.
“Spin”
button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
Do not use liquid detergent
when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the “Start(Pause)” button.
The indication next to the “Start delay” button
blinks and the countdown of the delay time begins.
• The time delay indication disappears when the
programme starts and it is replaced by the
programme sequence indication.
• Once having pressed the “Start(Pause)
” button,
the delay time can be reduced by pressing again
the “Start delay” button.
To cancel the “Start delay”
..before you press the “Start(Pause)” button:
• Turn the programme selector to another position
or press the “Reset”
button.
..after having pressed the “Start(Pause)”
button:
• Press the “Start(Pause)” button - the light of the
selected start delay goes off. Press “Start(Pause)
again if you want to start the selected programme
immediately.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause”
button lights up. The programme sequence indicator
shows the current programme phase, running from
left to right through Wash, Rinse, Drain/Spin.
When the programme phrase is finised, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show the the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open
it during a running programme, refer to “Cancel
(Reset)” a running programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Service”
Lighting up of the “Service” indication can be caused
by a fault in an electrical component.
“Water tap closed”
The washing machine has no or insufficient water
supply; the water tap might be closed or the water
inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may
be kinked or the filter must be cleaned (see “Cleaning
the filter” in your Instructions for Use)
PROGRAMME END
.
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start(Pause)” button to pause the
programme. The light blinks.
”
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start(Pause)” button again.
The new programme continues at the same
position where the previous programme was
interrupted. Do not add detergent for this
programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before
the end.
• Press and hold the “Reset” button for a few
seconds.
Any existing water is drained out. It may last
some time until the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 01207
Loading...