Whirlpool AWO/C 6008 INSTRUCTION FOR USE

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

PROGRAMME CHART

x00/

x00 Rpm

E. Programme selector

F. “Start/Pause” button

A B

G. Programme sequence indicator

H. “Reset” button

Programme

Care

Labels

Max. Load

Cotton

with prewash 95 °C

Cotton

95 °C

Cotton

40 - 60 °C

Cotton Rapid

60 °C

Synthetics

with prewash 60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Rinse & Spin

Spin

Short Spin

Drain

 : option / Yes : dosing required

Do not use liquid detergents.

For improved garment care spin speed is restricted to 400 rpm in this programme.

– 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

– 6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –

– 1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. – – –

– – Water is drained only without any spinning. – – – – – –

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen,

6.0 underwear, shirts etc.).

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an

6.0

oxygenbased bleach additive which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

6.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. – Yes

Normally to heavily soiled cotton laundry washable at 60°C.

6.0 Faster alternative to “Cotton” programme for washing your cotton laundry at 60°C.

Heavily soiled laundry made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with

3.0 cotton.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with

3.0 cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses. – Yes

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

3.0

Brief programme to refresh your laundry.

1.0 Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable. – Yes

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

Care programme with a very gentle spin

Type of wash / Notes

- respect the manufacturer's recommendations on the care label

Detergents and Additives Special options

Pre-

Main

wash

Yes Yes

– Yes

Yes Yes

– Yes

Softener Spin

Wash

Whirlpool is a registered trademark of Whirlpool USA.

speed

reduction

X00/

X00 Rpm

  

 

  



Rinse

hold

5019 301 01206

Max.

Spin Speed

rpm

Max.



– Max.

400

Max.

CONSUMPTION DATA

Programme

Cotton 95 6.0 59 * 1.90 2:00 Cotton ** 60 6.0 49 0.90 4 :00 Cotton ** 60 3.0 37 0.69 2:20

Cotton 40 6.0 54 0.65 2:45 Cotton ** 40 3.0 37 0.58 2:30

Cotton Rapid

Synthetics 60 3.0 50 * 0.70 1:30 Synthetics 40 3.0 46 0.50 1:15

Delicates 30 1.5 50 0.50 0:45

Quick wash 30 3.0 40 0.40 0:30

Wool

Handwash 40 1.0 45 0.60 0:40

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). *

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

** Reference programmes for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Temperature

(°C)

60 6.0 49 1.02 2:30

40 1.0 55 0.60 0:45

Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature.

• The indication lamp next to “Start/Pause” button blinks.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• Particularly useful if you want to postpone spinning to a later time, or if you want to drain only. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

“Start/Pause” button blinks.

Terminate the “Rinse hold” option :

• Press the “Start/Pause” button ; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the

“Start/Pause” button .

PROGRAMME START

Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/

Pause”

button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use)

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light blinks.

2. Select the new programme (with temperature), and any options if you want.

3. Press the “Start/Pause”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few

seconds. Any existing water is drained out. It may last some time until the door can be opened.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01206

Whirlpool AWO/C 6008 INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual