Whirlpool AWO 9561/1 INSTRUCTION FOR USE
30105744GB.fm Page 1 Friday, April 15, 2005 5:56 PM
GB AWO 9561/1 PROGRAMME CHART
This washing machine is equipped with
automatic safety functions which detect
and diagnose faults at an early stage and
react appropriately, e.g.:
A. “Water Tap Closed” indication
B. “Clean Pump” indication
C. “Door Locked” indication
Programme
Cotton /
Antibacterial
Synthetics
Daily
Superrapid
Delicates
Wool
Handwash/
Lingerie
Rinse + Spin
+
Spin
Gentle Spin
Drain
Care
Labels
—
—
—
—
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton, coloured cotton and linen.
For temperature selection, please respect the manufacturer's reco mmendation on the
care label. At a temperature of 80°C or more, this programme eliminates bacteria,
ensuring sanitization of your laundry. The bacteria removal efficiency has been tested
following a similar methodology to the NF EN 13697 standard of Nov. 2001.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally to heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with
cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens, labelled with the woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for
machine washable wool.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.
This cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly
recommended).
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used
in this programme.
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
6th Sense
the wash load.
Type of wash/Notes
A
B
E
F
D
intelligent technology always guarantees perfect results with maximum efficiency whatever
H
G
Detergents and additives Special options Max
Max
Softe-
Load
6.0
2.5
3.0
3.0
1.5
1.0
1.0
6.0
ner
kg
❉
❉
❉
❉
❉
❉
❉
❉
6.0 — — —
1.5 — — —
—————————— — — —
C
D. Programme selector knob
E. Programme sequence indication
F. Temperature selection button
G. “Start/Pause” button
H. “Start/Pause” indication
I. “Start Delay” button
J. “Start Delay” indication/
“Remaining Time” display
K. “Reset” button
I J KL
L. “Spin Speed” button
Selecting any option the indication lights
up. When the combination of programme,
additional options and temperature is not
possible, the indication lights switch off
automatically. Unsuitable combinations of
options are deselected automatically.
Main
Wash
Pre-
wash
Yes
Yes
❉❉❉❉❉ ❉❉ ❉
❉❉❉❉❉ ❉❉
Yes —
Yes —
Yes
❉❉
Yes —
Yes —
——
Start
Delay
Easy
Ironing
❉❉
❉❉
——
——— —
❉
——— —
❉
❉❉
——— — —
❉
——— — —
❉
Eco+ Pre-
wash
——
——
❉
——
Intensive
Rinse
❉❉ ❉
❉❉ ❉
—
❉❉ ❉
Rinse
Hold
❉
❉
❉
Spin
Speed
Reduction
1)
❉
1)
❉
1)
❉
2)
❉
❉
1)
❉
Tempe-
Spin
Speed
rpm
rature
°C
1200 20 to 95
1)
20 to 60
800
1200 30 to 60
1200 20 to 30
1)
20 to 40
800
1)
20 to 40
800
2)
20 to 40
400
1200 —
1200 —
1)
800
—
❉
: optional / Yes : dosing required
1)
For improved garment care spin speed is restricted to 800 rpm in this programme.
2)
In this programme default spin speed can be increased till 400 rpm.
Black process 45.0° 100.0 LPI
M0501
- tested and approved by The Woolmark Company -
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05744
30105744GB.fm Page 2 Friday, April 15, 2005 5:56 PM
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)*
Cotton / Antibacterial 95 6.0 54** 1.90 2:00
Cotton 60 6.0 49 1.14 2:20
Cotton with “Eco+”*** 60 6.0 49 1.02 2:30
Cotton 40 5.0 44 0.60 2:05
Synthetics 60 2.5 55 0.80 1:30
Synthetics 40 2.5 55 0.60 1:20
Daily7 40 3.0 45 0.50 1:00
Superrapid 30 3.0 37 0.40 0:30
Delicates 30 1.5 60 0.50 0:45
Wool 30 1.0 60 0.30 0:40
Handwash / Lingerie 30 1.0 45 0.30 0:40
Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance
with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the
water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the
water out.
*** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add the detergents as described in the programme
table or in the chapter “Detergents and Additives”
in the booklet.
1. Turn the
programme selector knob
to the
desired programme.
2. The
remaining time display
shows the
duration of the chosen programme (in hours
and minutes) and the indication of the
“Start/Pause”
3. The
programme sequence
spin speed indication
button is flashing.
and the predefined
corresponding to the
selected programme lights up.
The recommended temperature (see the
indicator) can be altered by pressing “+/-” button.
SELECT ANY DESIRED OPTION
Selecting any option the indication lights up.
When the combination of programme, additional
options and temperature is not possible, the
indication lights switch off automatically. Unsuitable
combinations of options are deselected
automatically.
“Easy Ironing” button
• Can be used together with “Cotton ”, “Synthetics”
and “Daily” programmes to make ironing easier.
• Increases the water quantity and the clothes are
spun very soft.
“Eco+” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption can be achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. The cycle time increases
approximately 15 min.
“Intensive Rinse” button
• More water and a longer time in rinse cycle is added.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programme “Synthetics”, “Daily” and “Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
The programme stops to “Rinse Hold” at
Note:
the time the “Rinse Hold” light in the programme
sequence indication is on.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob counterclockwise to
the “Drain” programme and press the
“Start/Pause”
button again when the indication
next to it is flashing.
“Spin Speed” button
• Every programme has an automatic predefined
maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “0” is selected, the final spinning
is cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the
delay time by 1 to 23 hours;
• Press the
“Start/Pause”
button.
The indication next to the “Start Delay” button
lights up and goes off when the programme starts.
• The time delay indication disappears when the
programme starts and it is replaced by the
remaining time.
• The number of hours preselected can later be
reduced pressing again the “Start Delay” button.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
“
• Turn the programme selector to the
Off
/0”
position.
• Reselect the desired programme and options
and press
“Start/Pause”
button to start the
programme.
..after having pressed the “Start/Pause” button:
• Press the “Reset” button for at least 3 seconds the start delay time disappears from the
remaining time indication,
• then either start the chosen programme by
pressing the
“Start/Pause”
button twice
• or turn the programme selector knob to the
“Off/0” position and chose another programme.
PROGR AMME START
Open the tap and press the
indication next to the
“Start/Pause”
“Start/Pause”
button. The
button lights up.
The indications show the sequence reached in the
programme. After starting the programme, the
sequence indication runs from left to right through
Wash, Rinse, Spin.
When the sequence of the programme is finished
the corresponding indication goes out.
RED INDICATIONS
“Water Tap Closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean Pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
“Door Locked”
As long as a washing programme is running, the
lamp lights up to show that the door cannot be
opened. When the indication goes off, the door can
be opened again.
PROGRAMME END
• The remaining time is on “0:00” and all the
lights of the programme sequence indication
are off.
“
/0”
Off
1. Turn the programme selector to the
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry
out.
CHANGE THE PROGRAMME,
TEMPERATURE, OPTIONS AFTER
PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The
new programme continues at the same position
where the previous programme was
interrupted. Do not add detergent for this
programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Reset”
button cancels a programme before
the end.
• Press the
“Reset”
button for at least 3 seconds.
Any existing water is drained out before the
door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05744
Black process 45.0° 100.0 LPI
Loading...