Whirlpool AWO5100, AWO6100, AWO6100P User Manual
USER MANUAL
AWO5100
AWO6100
AWO6100P
TABLE OF CONTENTS
About the environment. As such we urge you to follow the
correct disposal procedure for your
This will help conserve natural resources and ensure recycling in a manner that
health
and the environment.
You must dispose of this product and its packaging according to local laws and regulations.
Because this product contains electronic components, the product and its accessories must be
disposed of separately from household waste when the product reaches its end of life.
Contact your local authority to lea
rn about disposal and recycling. The product and packaging
should be taken to your local collection point for recycling. Some collection points accept
products free of charge.
We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a
resultof product improvement and development
LEGEND
DISPOSAL
For your safety, any instructions in this manual with this "Warning" sign must be followed strictly.
Yes
No
Optional
03 - 09
10 - 15
16- 20
COMPONENTS> ............................... 03
PR
EPARATION> ................................ 04
SAFETY INSTRUCTIONS> ................... 05
INS
TALLATION> ................................ 06
CONTROL PANEL> ............................ 08
BEFORE USE USING THE APPLIANCE MAINTENANCE
PROGRAM SELECTION> ..................... 10
>
TECHNICAL DATA
.. 11
WASHING METHODS> ...................... 12
CLEAN
ING & CARE> .......................... 16
DISPLAY CODES> .............................18
TR
OUBLESHOOTING> ........................ 19
...........................
product and packaging materials.
protects your
03
BEFORE USE
COMPONENTS
T H AN K S FO R P UR CH AS I N G A WHIRLPOOL PRODUCT
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you
get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
I f you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the
new owner can become familiar with the appliance and safety warnings.
ACC ESS O R I ES
Check the accessories and literature
in accordance with this list:
1x I nlet hose assembly
1x D rain hose bracket
1x U ser manual
3x Blanking plugs
USER MANUAL
AWO5100
AWO6100
Whirlpool
1x Bottom Cover
04
BEFORE USE
PREPARING THE MACHINE
Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon
opening the package, water drops may be seen on the plastic bag and the porthole. This is normal
phenomenon resulting from water tests in the factory.
DESCRIPTION
This diagram may be slightly different from the layout of the washing machine you have just
purchased due to technical improvements.
PREPARATION
Control panel
Door handle
Work top
Washer door
Detergent distribution drawer
Filter cover
S1
S2
S3
T3
T2
T1
Drain hose
Water inlet valve
Power cord
Back cover
Back cover screws
Transportation bolts
05
BEFORE USE
SAFETY INSTRUCTIONS
DO ...
... Make sure that the transport bolts are removed.
... Use a separate earthed socket for the power supply.
... Make sure that the plug is accessible.
... Hold the plug and not the electric cable when
unplugging the power supply.
... Make sure that the fuses in the power circuit are rated
for 15A.
... Keep away from heat sources and direct sun light to
prevent plastic and rubber components from aging.
... Make sure that the power cord is not caught under or
in the appliance and avoid damage to the power cable.
... Check that hose joints and connections are firm and no
water can leak. If joints are loose or there is leakage, turn off the
water supply and refix.
Do not use the washing machine until the
hoses are properly fixed.
DO ...
... Pull up zips and fix loose threads to prevent the items
from being entangled. If necessary, put small items into a net bag
or pillow.
... Turn off the machine after each wash program and
switch it off at the mains to save electricity and for safety. Wipe
clean the lower part of the porthole.
... Keep the door slightly open when the washing machine
is not in use to prevent formation of odours.
... Let the power cord be replaced by the manufacturer, his
service agent or other accordingly qualified persons, in case it is
damaged.
... Ensure that the appliance is not used by persons
with reduced physical, sensory or mental capabilities, lack of
experience and knowledge without supervision or instruction by a
person responsible for their safety.
... Supervise children to ensure that they do not play with
the appliance.
DO NOT ...
... Touch or use the appliance when barefoot or with wet
or damp hands or feet.
... Use flammable detergent or dry cleaning agent.
... Use any flammable sprays in close vicinity to the
appliance.
... Remove or insert the plug in the presence of flammable
gas.
... Allow children to play with the appliance or packing materials.
... Install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under or near a
sink unit. In the event of a water leak allow the machine to dry
naturally.
... Place the washing machine directly on a carpet, or close
to a wall or fu
rniture.
DO NOT ...
... Touch the washer door during the washing process - it
gets hot!
...Place heavy objects or sources of heat on top
of the appliance.
... Hot wash foam rubber or sponge-like materials.
... Open the detergent distribution drawer during the wash
cycle.
... Force the washer door open. The door is fitted with a
self-lock device and will open sho
rtly after the washing procedure
has ended.
... Open the washer door if the water level is visibly
over the po
rthole.
... Cover the washing machine with plastic cover so that
inside dampness cannot be kept in.
BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME
DURING DAILY USE OF THE APPLIANCE
DISMANTLE THE TRANSPORTATION BOLTS
The transportation bolts are designed for clamping anti-vibration components inside
of the washing machine during the transportation process.
Remove the back cover.1.
Remove the three bolts on the rear side and take out the synthetic 2.
stabilisers from within the machine.
Replace the back cover.3.
Fill the holes left by the bolts with blanking plugs.4.
Note:
1.When you replace the back cover,the convexity must face to
outside, and you have to insert the back cover from the two gaps
as shown in fig.3.
2.Keep the transportation bolts and synthetic stabilisers
in a safe place for later use.
INSTALLATION
ADJUSTING THE WASHING MACHINE
There are adjustable feet under the bottom of the washing machine. Before use, they should be
adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will
also reduce wear and tear. We recommend using a spirit level to level the appliance.The floor should be
as stable and flat as possible.
ADJUSTING THE BOTTOM COVER
When open the carton package, you will find a metalline board
which is laid on the top of the washing machine as shown fig.1,
the board used for reducing noise and rat proof by install it under
the cabinet when setting as shown in fig.2.
3.
1.
2.
4.
Loading...