Whirlpool AWM 6105/P INSTRUCTION FOR USE

GB AWM 6105/P

A. Programme Sequence Indicator B. “Start/Pause” Button C. “Door Open” Indication D. “Spin Speed Reduction” Button E. “Start/Delay” Button

Programme

Cotton

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Type of wash / Notes

Start

startu

Eco

Easy

Ironing

Bez

zagnie-

ceń

Max.

Detergents and Additives Special options Max.

Load

Softener Main

5,0

Wash

Yes

Pre-

wash

Delay

Opóźnienie

i i i i i i i i

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

i : option / Yes : dosing required

For improved garment care spin speed is restricted to

800 rpm in this programme.

For improved garment care spin speed is restricted to

400 rpm in this programme.

Prewash

Pranie

wstêpne

Intensive

Intensivne

p³ukanie

Rinse

Rinse Hold

Zatrzy-

manie

p³ukania

Spin Speed

Reduction

Zmniejszenie

szybkości wirowania

Spin

Speed

rpm

1000

Programme

Selector

Bawełniane

95°,60°,40°

Synthetics

Daily Slightly to normally soiled textiles made of cotton and/or synthetics. 3,0

Short Shortly worm outer clothing made of cotton, polyester, polyamide and blends with cotton. 3,0

Delicate Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1,5

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

2,5

Yes

Yes –

Yes

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

Wool

This cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).

1,0

Yes –

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.

Handwash/

Lingerie

Rinse + spin – Same as the last rinse and final spin in the “Cotton” programme. 5,0

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning.

1,0

Yes –

– –

Spin – In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. 5,0 – – –

Gentle Spin – In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. 1,5 – – –

Drain – Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. – – – –

i i i i i i i i

i i

–

– – –

– –

– – – –

–

– – – – –

–

i i i

–

i i

–

i i i

– – –

– – – – – –

Whirlpool is a registered trademark of Whirlpool USA.

Syntetyczne

800

1000

800

– 400

1000

800

Codzienne

Pranie rêczne

Wirowanie

Wypompo-

60°,40°

60 min.

40°

Program

szybki

30°

Delikatne

40°,30°

Wełniane

30°,20°

Bielizna

30°

Płukanie i

wirowanie

Delikatne

wirowanie

wanie

5019 301 10247

CONSUMPTION DATA

Temperature

Programme

Cotton 95 5,0 49** 1,90 2:00

Cotton 60 5,0 44 0,85 2:20

Cotton 40 4,5 44 0,60 2:05

Synthetics 60 2,5 55 0,80 1:30

Synthetics 40 2,5 55 0,60 1:20

Daily 40 3,0 45 0,50 1:00

Short 30 3,0 37 0,40 0:30

Delicates 40 1,5 60 0,60 0:45

Wool 30 1,0 60 0,30 0:40

Handwash/Lingerie 30 1,0 45 0,30 0:40

Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Selector

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Turn the programme selector knob to the desired programme and temperature.

2. The remaining time display shows the duration of the chosen programme (in hours and minutes) and after taking some seconds for calculating, the pilot lamp of the “Start/Pause” button is flashing.

3. The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

(hours : minutes)*

“Eco” button

• The duration of the wash is extended and the

temperature reduced to save up to 40% of energy but maintaining good washing results.

“Easy Ironing” button

• Can be used together with Cotton, Synthetics and

Daily programmes to make ironong easier.

• Increases the water quantity and the clothes are spun very soft.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. The cycle time increases approximately 15 min.

“Intensive Rinse” button

• The amount of water is increased to ensure a more

Duration

intensive rinse.

SELECT ANY DESIRED OPTION

• This option is particulary suitable for areas with very

soft water, washing baby linen and people with detergents allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics”, “Delicates” and “Daily”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only. Note: The programme stops to “Rinse Hold” at the time the “Rinse Hold” light in the programme flow indication is on.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob counterclockwise to the “Drain” programme and press the “Start/Pause” button again when flashing.

“Spin Speed Reduction” button

• Every programme has an automatic predefined

maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “0” is selected, the final spinning

is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer's convenience, for example at night when electricity is cheaper.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours.

• Press the “Start/Pause” button.

• The time delay indication disappears when the

programme starts and it's replaced by the remaining time.

• The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”

• Turn the programme selector to the “ “.

• Reselect the desired programme and options and press the “Start/Pause” button.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The “Start/Pause” button lights up.

The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin. When the sequence of the programme is finished the corresponding lamp goes out.

DOOR LOCK

The door can be opened when the “Door Open” indication is on.

PROGRAMME END

• The remaining time is on “0:00” and all the lights of

the programme sequence indication are off.

1. Turn the programme selector to the “ “ position.

2. Turn the water supply tap off.

3. Open the door and unload the machine.

4. Close the tap and and leave the door ajar to allow the drum to dry out.

CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the progamme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A PROGRAMME BEFORE THE END

1. Press the “Start/Pause” button to pause the progamme. The light flashes.

2. Set the programme selector to “Drain”. The spin indicators show “0” and the remaining time shows “0:02”.

3. Press the “Start/Pause” button to start the drain progamme.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 10247