Whirlpool AWM 5104 INSTRUCTION FOR USE

3gb05172a.fm5 Page 1 Friday, February 22, 2002 3:50 PM

AWM 5104/1 - AWM 5104/AL

A. “On/Off” Button B. “On/Off” Indication

Programme

Cotton 95°

with prewash

Synthetics 60°

with prewash Delicates 40°

with prewash

Cotton 95°

Cotton 60° Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Cotton 40° Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Synthetics 60°

Synthetics 40°

Delicates 40° Curtains and delicate clothing, dresses skirts, shirts and blouses.

Wool 40°

Silk 30°

Rinse and spin

Spin

Short spin

Drain

Care

Labels

—

Type of wash/Notes

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

If you select “Rapid”, washing temperature is 60°.

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.

The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. Drain only - no spinning. Alternative method of terminating programme the synthetic, delicate

and wool programme and for premature removal of the laundry.

Max

Load

5.5

2.5

1.5

Normal 5.5

Rapid 3.0

5.5

Normal 2.5

Rapid 1.5

2.5

1.5

1.0

5.5

1.5

—

During the selected washing programme the programme selector knob moves by steps clockwise through the phases

prewash, main wash, rinse and spin

from some seconds to several minutes.

❉

: optional / Yes : dosing required

For improved garment care spin speed is restricted to 900 rpm in this programme.

For improved garment care spin speed is null in this programme.

Detergent and additives Special options

Softener Main

❉ ❉ ❉

❉ ❉

❉

❉ ❉

——————

Wash

Yes Yes

Yes —

Yes — —

Yes —

———

Pre-

wash

Rapid Rinse

—

Hold

❉❉ ❉❉ ❉❉

Cold Wash

❉❉❉

❉❉ ❉❉

❉❉❉

—

❉❉ ❉❉

❉❉

❉❉ ❉

Whirlpool is a registered trademark of Whirlpool USA.

—

5019 301 05172/A

. Each step takes

Programme

Selector

5 6

A B

Black Process Plate

3gb05172a.fm5 Page 2 Friday, February 22, 2002 3:50 PM

CONSUMPTION DATA

Load

Programme

(kg) Cotton 90° 5.5 54 1.90 2:05 Cotton 60° 5.5 49 1.04 2:25 Cotton 40° 5.0 44 0.60 2:10

Synthetics 60° 2.5 55 0.80 1:35 Synthetics 40° 2.5 55 0.60 1:25

Delicates 40° 1.5 60 0.60 0:50

Wool 40° 1.0 60 0.45 0:45

Silk 30° 1.0 60 0.30 0:45

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Open the tap.

2. Set the

4. Check that the door is well closed and turn on the

programme selector

programme.

Special options

washing machine by pressing the button. The indicator lights up, indicating that the washing machine is on.

can be selected.

to the desired

“ON/OFF”

Water

(l)

SELECT ANY DESIDERED OPTION

“Rapid Wash” button

• For quick, economical washes.

• Ideal for minimum loads of lightly-soiled articles.

Note:

reduce the detergents quantity.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.

Energy

(kWh)

Approx.

Programme

Duration

(hours:minutes)

“Cold Wash” button

• With this option water is heated only up to 20°C.

PROGRAMME CHANGE

To reselect a programme when a cycle has already begun:

1. Switch off the appliance by pressing the

ON/OFF

“

2. Select the new programme.

3. Start the programme by pressing the “

button.

PROGRAMME END

1. At the end of the programme the programme

selector moves to the stop position.

2. To unload the machine wait for the door to

unlock (about 1 minute).

3. Switch off the appliance, open the door and

take out the laundry.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

” button.

ON/OFF

NOTES AND INDICATIONS FOR USE

WATER LEVEL

•

It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.

SPIN SPEED CONTROL

•

Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat).

”

This control avoids cloth and machine damage and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.

MOTOR NOISE

•

The running noises of the new, electronicallycontrolled motor are not the same as the ones you are used to from your old appliance. Don’t be surprised - modern technology has a modern sound.

CLEANING THE FILTER

•

To ensure an impeccable function of the pump, check the filter regular and clean it if necessary.

Black Process Plate

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 05172/A