Whirlpool AWM 5063 INSTRUCTION FOR USE

AWM 5063

A. “On/Off” Button B. “On/Off” Indication

During the selected washing programme the programme selector knob moves by steps clockwise throug h the phases

prewash, main wash, rinse and spin

from some seconds to several minutes.

: optional / Yes : dosing required

❉

. Each step takes

Programme

Cotton

with prewash

Synthetics

with prewash

Delicates

with prewash

Cotton

short

Synthetics Synthetics

short

Delicates

Wool

Silk

Rinse + spin

Spin

Gentle spin

Drain

Care

Labels

—

— —

—

Type of wash/Notes

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and identified as machine

washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.

The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle i n the “Wool” p rogramme. Drain only - no spinning. Alternative method of terminating programme the syntheti c,

delicate and wool programme and for premature removal of the laundry.

Max

Load

5.0

2.5

1.5

5.0

2.5

1.5

1.0

5.0

1.5

Detergents and additives Special options

Bleach Softener Main

❉❉

— —

❉❉

— —

—

— —

——

Temperature

Wash

Pre-

wash

Yes Yes Yes Yes

❉

Yes Yes

❉

Yes —

❉

Yes —

❉

Yes —

❉

Yes — —

❉

Yes —

❉ ❉

————— — — ————— — —

————— — —

——

Half

Load

Mezzo Carico

Rinse

Hold

Anti

Piega

No Spin

Stop

Centrifuga

❉❉ ❉ ❉❉ ❉

—

❉❉

❉❉ ❉

❉❉ ❉ ❉❉ ❉

—

❉❉ ❉❉

—

❉

—

❉❉ ❉

Whirlpool is a registered trademark of Whirlpool USA.

Selector

°C

Max. 95°

Max. 60°

Max. 40°

Max. 95°

Max. 60°

Max. 60° Max. 40°

Max. 40°

Max. 30°

—

5019 301 05047

Programme

Selector

1 2 3

5 6

7 8

A B

C D

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours:minutes) Cotton 95 5.0 49 1.70 1:50 Cotton 60 5.0 44 0.95 2:00 Cotton 40 5.0 44 0.55 1:50

Synthetic 60 2.5 55 0.80 1:25 Synthetic 40 2.5 50 0.60 0:50

Delicate 40 1.5 50 0.50 0:45

Wool 40 1.0 50 0.50 0:40

Silk 30 1.0 37 0.40 0:40

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “ Detergents and Additives” in the booklet.

1. Open the tap.

2. Set the programme selector to the desired programme.

3. Set the temperature selector to the desired temperature.

4. Special options can be selected.

5. Check that the door is well closed and turn on the washing machine by pressing the “ON/OFF” button. The indicator lights up, indicating that the washing machine is on.

SELECT ANY DESIDERED OPTION

“Half Load” button

• Reduces water consumption, above all during

rinsing.

• Suitable for lightly-soiled laundry and small loads

(max 3 kg).

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.

“No Spin” button

• Especially for delicate garments to avoid wear and tear caused by the spin.

Note: with the "Cotton" and "Synthetics" programmes a short spin cycle is provided in any case, even if the exclusion has been selected, in order to optimize rinsing results.

Note: Reduce the detergents quantity.

PROGRAMME CHANGE

To reselect a programme when a cycle has already begun:

1. Switch off the appliance by pressing the “ON/ OFF” button.

2. Select the new programme.

3. Start the programme by pressing the “ON/OFF” button.

PROGRAMME END

1. At the end of the programme the programme selector moves to the stop position.

2. To unload the machine wait for the door to unlock (about 1 minute).

3. Switch off the appliance, open the door and take out the laundry.

4. Close the tap and leave the door ajar to allow the drum to dry out.

NOTES AND INDICATIONS FOR USE

• WATER LEVEL It may not be visible as the cycle is optimised for a minimum water consumption without compromising washing results.

• SPIN SPEED CONTROL Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and machine damage and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.

• MOTOR NOISE The running noises of the new, electronicallycontrolled motor are not the same as the ones you are used to from your old appliance. Don’t be surprised - modern technology has a modern sound.

• CLEANING THE FILTER To ensure an impeccable function of the pump, check the filter regular and clean it if necessary.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 05047