GB AWM 3000
A. “On/Off” Button
B. “On/Off” Indication
A
B
During the selected washing programme the
programme selector knob moves by steps
clockwise through the phases prewash, main
wash, rinse and spin. Each step takes from
some seconds to several minutes.
i : option / Yes: dosing required
1)
For improved garment care spin speed is
restricted to 900 rpm in this programme.
2)
For improved garment care spin speed is zero in
this programme.
Max.
Programme
Cotton
with prewash
Synthetics
with prewash
Delicates
with prewash
Cotton
Cotton short
Synthetics
Synthetics short
Delicates Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1,5 –
Wool
Silk
Rinse + Spin –
Spin –
Gentle Spin –
Drain –
Care
Labels
Type of wash / Notes
Heavily soiled, long wearing and temperature stable textiles in cotton and linen
(bed linen, table linen, underwear, shirts etc.).
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen,Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Heavily soiled curtains and delicate clothing, dresses, skirts, shirts and blouses. 1,5 –
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly soiled overalls ans sportswear made of cotton, polyester, polyamide and
blends with cotton.
Only woollens with a felt-free nish, labelled with the woolmark and identied as
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
With this programme you can add starch and/or fabric softener.
The programme ands with an intensive spin cycle.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
Drain only - no spinning. Alternative method of terminating the synthetic, delicate
and wool programmes and for premature removal of the laundry.
Load
kg
4,5
2,5 –
5,0
3,0
2,5 –
2,5 –
1,0 –
1,0 –
5,0 –
5,0 – – – –
1,5 – – – –
– – – – – – – – – –
Detergents and Additives Special options Max. Spin
Bleach Softener Main
i i
i
i
i i
i i
i
i
i
i
i
i
Pre-
wash
Spin Speed
Reduction
Wash
Yes Yes
Yes Yes
Yes Yes
Yes –
Yes –
Yes –
Yes –
Yes –
Yes –
Yes – –
– –
Half
Load
1000
500
i i i
1)
i
1)
i
i i i
i i i
1)
i
1)
i
1)
i
1)
i
2)
i i i
i
1)
i
i i
–
i i
i i
–
–
–
– – 1000 –
– – 900
Rinse
Hold
i
i
i
i
rpm
–
2)
1)
1)
1)
1)
1)
1)
1)
Temperature
Selector
°C
Max. 60°
Max. 40°
Max. 60°
Max. 60°
Max. 40°
Max. 40°
Max. 30°
–
Speed
1000 Max. 95°
900
900
1000 Max. 95°
1000 Max. 60°
900
900
900
900
1000 –
Programme
Selector
1
2
3
4
5
6
7
8
9
10
A
B
C
D
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 10133
CONSUMPTION DATA
Temperature
Programme
Cotton 95 4,5 49 1,70 2:05
Cotton 60 5,0 49 0,95 2:20
Cotton 40 4,5 44 0,60 2:05
Synthetics 60 2,0 55 0,80 1:30
Synthetics 40 2,0 55 0,60 1:20
Delicates 30 1,5 60 0,50 0:45
Wool 30 1,0 60 0,30 0:40
Silk 30 1,0 60 0,30 0:50
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with standard IEC 60456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
The data on the “Energy Label” refer to the programme “Cotton 60°C”.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add the detergents as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Open the tap.
2. Set the programme selector to the desired
programme.
3. Turn the temperature selector to the desired
temperature.
4. Special options can be selected.
5. Check that the door is well closed and turn
on the washing machine by pressing the
“On/Off” button. The indicator lights up,
indicating that the washing machine is on.
Selector
(°C)
Load
(kg)
Water
(l)
SELECT ANY DESIRED OPTION
“Spin Speed Reduction” button
• Reduces predetermined automatic maximum
spin speed.
In some programmes the maximum nal spin
speed is limited to protect your laundry items.
Selection of a higher spin speed is not
possible.
“Half Load” button
• Reduces water consumption, above all during
rinsing.
• Suitable for lightly-soiled laundry and small
loads (max. 3 kg).
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the nal spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for the
programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Energy
(kWh)
Approx. Programme
(hours : minutes)
Duration
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
nal spin cycle for the present wash
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme.
PROGRAMME CHANGE
To select a programme when a cycle has already
begun:
1. Switch off the appliance by pressing the
“On/Off” button.
2. Select the new programme.
3. Start the programme by pressing the “On/Off”
button.
CANCEL A PROGRAMME BEFORE THE END
1. Switch off the appliance by pressing the
“On/Off” button.
2. Turn the programme selector to “D” for draining.
3. Push the “On/Off” button to start the “Drain”
programme.
END OF WASH CYCLE
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the machine wait for the door to
unlock (about 1 minute).
3. Switch off the appliance, open the door and
take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
NOTES AND INDICATIONS FOR USE
• WATER LEVEL
It may not be visible as the cycle is optimised
for a minimum water consumption without
compromising washing results.
• SPIN SPEED CONTROL
Spin speed may be reduced automatically or
may even be excluded in the case of small
loads with highly absorbent garments (e.g.
bathrobes, bathmat).
This control avoids cloth and machine damage
and excessive vibrations and consequent noise
produced by the machine due to load
unbalance: by selecting high spin speeds the
noise level increases.
• MOTOR NOISE
The running noises of the new, electronically controlled motor are not the same as the ones
you are used to from your old appliance. Don't
be surprised - modern technology has a modern
sound.
• CLEANING THE FILTER
To ensure an impeccable function of the pump,
check the lter regularly and clean it if
necessary.
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 10133