Whirlpool AWM 200 INSTALLATION

GB AWM 200 PROGRAMME CHART

A. “On/Off” Button B. “On/Off” Indication

During the selected washing programme the programme selector knob moves by steps clockwise through the phases

prewash, main wash, rinse and spin

. Each step takes from some seconds to several minutes.

: optional / Yes: dosing required

❉

For improved garment care spin speed is restricted to 800 rpm in this programme.

For improved garment care spin speed is null in this programme.

Programme

Cotton

with prewash

Synthetics

with prewash

Delicates

with prewash

Cotton

Cotton short

Synthetics

Synthetics short

Delicates

Wool

Silk

Rinse and Spin

Spin

Short spin

Drain

Cotone con prelavaggio

Sintetici con

prelavaggio

Delicati con

prelavaggio

Cotone

Cotone breve

Sintetici

Sintetici breve

Delicati

Lana

Seta

Risciacquo e

Centrifuga Centrifuga

Centrifuga breve

Scarico acqua

Care

Labels

— — — —

Type of wash/Notes

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally to heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Normally soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and identified as

machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning. With this programme you can add starch and/or fabric softener.

The programme ends with an intensive spin cycle. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool”

programme. Drain only - no spinning. Alternative method of terminating the synthetic, delicate

and wool programmes and for premature removal of the laundry.

Max

Load

5.0

2.5

1.5

5.0

3.0

2.5

1.5

1.0

5.0

1.5

Detergents and additives Special options Max.

Softener Main

❉ ❉ ❉

❉

❉ ❉

Wash

Yes Yes

Yes

Yes Yes

Yes

——

Pre-

wash

—

— —

—

Rinse Hold

Anti

piega

❉ ❉ ❉

❉

❉ ❉

——— — ——— —

Tem per at u re

Spin

Speed

rpm

1000 Max. 95°

800

1000 Max. 95°

1000 Max. 60°

800

800 800

800

1000

800

Selector

°C

Max. 60°

Max. 40°

Max. 60°

Max. 40°

Max. 30°

— —

—

———————

Programme

Selector

1 2 3

5 6

7 8

A B C D

Whirlpool is a registered trademark of Whirlpool USA

5019 301 10224

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme

Duration

(hours:minutes) Cotton 95 5.0 54* 1.70 2:00 Cotton 60 5.0 49 0.95 2:20 Cotton 40 4.5 49 0.55 2:05

Synthetics 60 2.0 55 0.80 1:30 Synthetics 40 2.0 55 0.60 1:20

Delicates 40 1.5 60 0.60 0:45

Wool 40 1.0 60 0.45 0:40

Silk 30 1.0 60 0.30 0:50

Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergents as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Open the tap.

2. Set the

programme selector

to the desired

programme.

3. Set the

temperature selector

to the desired

temperature.

4. Set the

spin speed selector

to the desired spin

speed.

Special options

can be selected.

6. Check that the door is well closed and turn on the washing machine by pressing the

“ON/OFF”

button. The indicator lights up,

indicating that the washing machine is on.

SELECT ANY DESIRED OPTION

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” and “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme.

PROGRAMME CHANGE

To reselect a programme when a cycle has already begun:

1. Switch off the appliance by pressing the “

ON/OFF

” button.

2. Select the new programme.

3. Start the programme by pressing the “

ON/OFF

” button.

PROGRAMME END

1. At the end of the programme the programme selector moves to the stop position.

2. To unload the machine wait for the door to unlock (about 1 minute).

3. Switch off the appliance, open the door and take out the laundry.

4. Close the tap and leave the door ajar to allow the drum to dry out.

NOTES AND INDICATIONS FOR USE

•

WATER LEVEL

It may not be visible as the cycle is optimized for a minimum water consumption without compromising washing results.

•

SPIN SPEED CONTROL

Spin speed may be reduced automatically or may even be excluded in the case of small loads with highly absorbent garments (e.g. bathrobes, bathmat). This control avoids cloth and machine damage and excessive vibrations and consequent noise produced by the machine due to load unbalance: by selecting high spin speeds the noise level increases.

•

MOTOR NOISE

The running noises of the new, electronicallycontrolled motor are not the same as the ones you are used to from your old appliance. Don’t be surprised - modern technology has a modern sound.

•

CLEANING THE FILTER

To ensure an impeccable function of the pump, check the filter regular and clean it if necessary .

Whirlpool is a registered trademark of Whirlpool USA

5019 301 10224