Whirlpool AWM 1300 INSTRUCTION FOR USE

3gb05282.fm5 Page 1 Thursday, January 24, 2002 3:19 PM

;

AWM 1300

A. Programme Sequence Indicator B. “Start/Pause” Button C. “Door Open” Indication D. “Start Delay” Button E. “Spin Speed Reduction” Button

Programme

Cotton/

Coloured cotton

Cotton

short

Synthetics

Short

Delicates

Wool

Silk

Rinse + spin

Spin

Gentle spin

Drain

Care

Labels

—

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning.

Same as the last rinse and the final spin in the “Coloured Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Coloured Cotton” programme.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Type of wash/Notes

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

❉

: optional / Yes : dosing required

For improved garment care spin speed is restricted to 900 rpm in this programme.

For improved garment care spin speed is null in this programme.

Rinse

Intensief

spoelen

Hold

Spoel-

stop

Spin Speed

Reduction

Centrifu-

geren

❉

❉❉❉

—

❉

—

❉❉❉

❉

Max

Spin

Speed

rpm

1300

900

1300

900

1300

900

Max Load

5.0

2.5

3.0

1.5

1.0

5.0

1.5

Detergents and additives Special options

Softener Main

Wash

❉

❉ ❉ ❉ ❉

❉

Yes

❉

———

Pre-

wash

❉❉❉❉❉ ❉ ❉ ❉

❉❉❉❉❉ ❉ ❉ ❉ ❉❉❉❉❉ ❉ ❉

—

❉❉

—

——

Start

Delay

Start-

selectie

❉❉

❉

❉ ❉❉ ❉ ❉

Easy

Ironing

Makkelijk

Strijken

——

——— —

——— — —

Eco Prewash Intensive

Eco Voorwas

——

❉

——

———————— — — — —

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 05282

Programme

Selector

Katoen

95°,60°,40°

Snel 30°

Synthetisch

60°,40°

Snel 30°

Fijne was

40°,30°

Wol 30°,20°

Zijde

Spoelen &

Centrifugeren

Kort

centrifugeren

Afpompen

Black Process Plate

3gb05282.fm5 Page 2 Thursday, January 24, 2002 3:19 PM

CONSUMPTION DATA

Temperature

Programme

Cotton 90 5.0 49 Cotton 60 5.0 44 0.95 2:00

Cotton 40 5.0 44 0.60 2:05 Synthetics 60 2.5 55 0.80 1:30 Synthetics 40 2.5 55 0.60 1:20

Short 30 3.0 37 0.40 0:30

Delicates 40 1.5 60 0.60 0:45

Wool 30 1.0 60 0.30 0:40

Silk 30 1.0 45 0.30 0:40

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1. Turn the desired programme and temperature.

2. The remaining time display shows the duration of the chosen programme (in hours and minutes) and after taking some seconds for calculating, the pilot lamp of the flashing.

3. The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.

SELECT ANY DESIRED OPTION

Selecting any option the indication lights up. When the combination of programme, additional

options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

programme selector knob

Selector

(°C)

“Start/Pause”

to the

button is

Load

(kg)

Water

(l)

“Easy Ironing” button

• Can be used together with Cotton and Synthetics programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very soft.

“Eco Wash” button

• The duration of the wash is extended and the temperature reduced to save up to 40% of energy but maintaining good washing results.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases approximately 15 min.

“Intensive Rinse” button

• More water and a longer time in rinse cycle is added.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicates”.

Energy

Programme

(kWh)

1.70 2:00

(hours : minutes)*

Approx.

Duration

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note:

The programme stops to “Rinse Hold” at the time the “Rinse Hold” light in the programme flow indication is on.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme and press the button again when flashing.

“Spin Speed Reduction” button

• Every programme has an automatic predefined

maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “0” is selected, the final spinning

is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Press the “Start Delay” button to select the

delay time by 1 to 23 hours;

• Press the

• The time delay indication disappears when the

programme starts and it is replaced by the remaining time.

• The number of hours preselected can later be

reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”.

• Turn the programme selector to the “” position.

• Reselect the desired programme and options

and press the

PROGRAMME START

Open the tap and press the The pilot lamp of the

The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin.

When the sequence of the programme is finished the corresponding lamp goes out.

“Start/Pause”

button.

“Start/Pause”

button lights up.

button.

DOOR LOCK

The door can be opened when the “Door Open” indication is on.

PROGRAMME END

• The remaining time is on “0:00” and all the lights of the programme sequence indication are off.

1. Turn the programme selector to the

position.

2. Turn the water supply tap off.

3. Open the door and unload the machine.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

CHANGE THE PROGRAMME, OPTIONS AFTER PROGRAMME START

1. Press the

programme. The light flashes.

2. Select the new programme (with temperature),

any options and another spin speed if you want.

3. Press the

new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A PROGRAMME BEFORE THE END

1. Press the

programme. The light flashes.

2. Set the programme selector to “Drain”. The

spin indicators show time shows “0:02”.

3. Press the

drain programme.

“Start/Pause”

Whirlpool is a registered trademark of Whirlpool USA.

button to pause the

button again. The

button to pause the

“0”

and the remaining

button to start the

“”

5019 301 05282

Black Process Plate