Whirlpool AWF 595 IG INSTRUCTION FOR USE
50120009GB.fm Page 1 Tuesday, September 18, 2007 10:22 AM
AWF 595
Programme
White Cotton
Antibacterial
Cotton
Synthetics
Tem pe -
rature
75 - 90 °C
60 °C
30 - 40 °C
30 - 60 °C
Care
Labels
PROGRAMME CHART
T BACHIJ
Max.
Load
- For temperature selection, respect the manufacturer’s recommendations on the care label
kg
5.0
Normally to heavily soiled bed linen, table linen and underwear , towels, shirts etc. made
of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
5.0
sanitization of your laundry. The bacteria removal efficiency has been tested following a
similar methodology to the NF EN 13697 standard of Nov. 2001.
5.0
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
2.5
polyamide (Perlon, Nylon) or blends with cotton.
Type of wash/Notes
A. Programme selector
B. “Start” button
C. “No spin” button
T. “Drying time” selector
H. “Rinse hold” button
I. “Energetic wash” buttons
J. “Prewash” button
Detergents and additives Special functions
Pre-
wash
Main
Softener Drying
wash
L
L
Yes
Yes
time
LLL L
LLL L LL
Pre-
wash
Energetic
wash
Rinse
holdNospin
—
Max.
spin
speed
rpm
Max.
L
1)
800
Delicates
Wool
Handwash
Quick wash
Daily load
Cold wash
Drying
Rinse
Drain / Spin
: optional / Yes : dosing required
L
1)
For improved garment care, spin speed is restricted in these programmes.
Black process 45.0° 150.0 LPI
30 - 40 °C
30 - 40 °C
Cold
35 °C
40 °C
—
——
—
——
——
2.5 Curtains and delicate clothing, skirts, shirts and blouses.
Only woollens labelled with the Woolmark and identified as machine washable.
1.0
This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.
2.5
Curtains and delicate clothing in wool or silk only washable in cold water.
Outer clothing worn for short periods and made of cotton, polyester, polyamide and
2.5
cotton blends.
3.5 Slightly to normally soiled garments made of cotton and/or synthetics.
5.0
Slightly soiled garments in cotton and/or synthetics washable only in cold water.
Drying can be carried out using the “Cotton“programme (with dry laundry load of 3 kg)
3.0
or the “Synthetics” programme (with dry laundry load of 1.5 kg).
5.0
Same as the last rinse and the final spin in the “Cotton” programme.
5.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
—
—
—
—
L
—
Yes
Yes
Yes
Yes
Yes
Yes
L
L
L
LL
LLL
LL
———
——
LL
———
The “wool” programme of this washing machine has been approved by The Woolmark Company for the washing
of garments labelled as “machine washable”. Follow the instructions given on the label sewn on the garment and
the instructions supplied by the washing-machine manufacturer. (Cert. no. M0402-M0403-M0404-M0405).
—— —
LL
—— — —
—— — —
———
——
———
—————
L
———
———
L
5019 501 20009
1)
500
800
800
Max.
Max.
Max.
Max.
Max.
1)
1)
L
L
L
L
L
L
L
50120009GB.fm Page 2 Tuesday, September 18, 2007 10:22 AM
CONSUMPTION DATA
Programme
Tem pe ra tu re
(°C)
White Cotton / Antibacterial 90 5.0 52
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. programme duration
(hours : minutes)
1.70 2:10
*
Cotton 75 5.0 52 1.33 2:05
Cotton with “Eco”
***
60 5.0 49 0.95 2:15
Cotton 40 5.0 62 0.51 2:00
Synthetics 60 2.5 46
0.80 1:40
**
Synthetics 40 2.5 46 0.46 1:35
Daily load 40 3.5 52 0.30 1:25
Quick wash 35 2.5 30 0.40 0:40
Delicates 30 2.5 54 0.24 0:45
Wool 40 1.0 56 0.44 0:54
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. In domestic use, consumption data
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display (if present) can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference programme for energy label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in the Instructions for Use.
1. Turn the
programme selector
to the desired
programme.
SELECT ANY DESIRED OPTION
Press the button(s) of any required option(s) - the
respective indicator lights up.
When the combination of programme and
additional option(s) is not possible,
the indicators switch off automatically. Unsuitable
combinations of options are deselected
automatically.
“Prewash” button
• Only for heavily soiled loads (e.g. sand, granular
dirt). Increases the cycle time by approx.
15 minutes.
• Do not use liquid detergent for the main wash
when activating the prewash option.
“Energetic wash” button
• This function increases the efficiency of the
detergent and prolongs the wash time, leaving
the set temperature unaltered.
“Rinse hold” button
• The laundry remains in the last rinse water
without the final spin cycle, to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
“Synthetics”, “Daily load” or “Delicates”
programmes.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain
only.
• If you select “Rinse hold”, do not leave the
laundry to soak for too long.
The programme stops to “Rinse hold” at
Note:
the time the “Rinse Hold” light in the programme
sequence indicator is on. The indicator next to
the
“Start”
button flashes.
To terminate the “Rinse hold” option:
•Press the
“Start”
button; the programme will
terminate automatically with the final spin cycle
for the preset wash programme.
“No spin” button
• Pressing this button excludes spinning at the end
of the programme but the intermediate spin
cycles remain. With this option selected, drying
is automatically excluded.
DRYING TIME
Turn the knob to select the drying time, in automatic
mode (at end of wash cycle) or in manual mode,
selecting the “Drying” programme (with handwashed laundry). In the latter case it is necessary to
spin at a speed of at least 800 rpm. With the knob
turned to “0”, drying is not carried out.
START DELAY
The “Start Delay” option allows you to programme
machine activation at a later stage, for example at
night when electricity is cheaper. Do not use liquid
detergent when activating the “Start delay”.
• Select the programme and options.
• Press the “Start Delay” button to select
programme start a delay time of 1 to 12 hours;
•Press the
“Start”
The indicator next to the
button.
“Start Delay”
button
lights up, whereas the selection indicator flashes
to signal the countdown of the remaining time.
• At the end of the delay time the machine starts
the set programme. The LED indicating the
wash stage in progress lights up.
• After pressing the
“Start”
, the number of hours
preselected can be reduced by pressing and
holding the “Start Delay” button.
To cancel the “Start Delay”:
Press the
“Start Delay”
button until all the
indicator lights are off. The selected programme will
then start.
PROGRAMME START
Open the tap and press the
few seconds the
“Start”
button lights up, indicating
“Start”
button. After a
that the door is locked and the wash cycle has
started.
“DOOR OPEN” INDICATOR
The “Start” button flashes when the wash cycle has
completed indicating that the door can now be
opened. As long as a wash programme is running,
the door remains locked and must not be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
PROGRAMME END
• The “Start” button flashing indicates that the
programme has finished and the door is
unlocked.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGING PROGRAMME AND/OR
OPTIONS AFTER PROGRAMME START
1. Turn the programme selector to “Off/O”.
2. Select the new programme, any options and
another spin speed if you want.
3. Press the
“Start”
button again. The new
programme resumes the wash programme
from where the previous one was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
• Reset by turning the programme selector to
“Off/0” and select the “Drain Spin ” programme
to remove the water remaining in the bowl
before the door can be opened.
Black process 45.0° 150.0 LPI
5019 501 20009
Loading...