Whirlpool AWE 8830 INSTRUCTION FOR USE

GB

A. Programme selector

B. “Temperature” button

C. Temperature display

D. “Spin” button

E. “Start delay” button

F. Time display

G. “Start(Pause)” button

PROGRAMME CHART

L

H

C

M

K

I

F

J

B

EG

D

A

H. Programme sequence indicator

I. “Door open” indication

J. “Reset/Drain” button

This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately:

K. “Service” indication

L. “Water tap closed” indication

M. “Clean filter ” indication

Max.

Programme

Tempe-

rature

Care

Labels

Load

kg

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their

Mixed

Cotton

Synthetics

Delicates

20 - 60°C 3.0

20 - 95°C 6.0

20 - 60°C 3.0

20 - 40°C 1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Fabrics

Wool /

Handwash

Jeans

Whites

Light colours

20 - 40°C 1.0

20 - 60°C 5.0

20 - 60°C 6.0

20 - 60°C 4.0

Colours

Dark colours

SuperEco

AquaEco

Economy

Speed15

20 - 60°C 4.0

20 - 60°C 6.0

20 - 40°C 2.5

20 - 30°C 3.0

Spin – –

Rinse & Spin – –

i: optional / Yes : dosing required

1)

For improved garment care, spin speed is restricted in these programmes.

blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load. If soil level
requires, add oxygen-based stain removers.

Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and
linen.

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.

Woolens, labelled with the Woolmark and identified as machine washable, as well as textiles
made of silk, linen, wool and viscose marked as handwashable.

This programme is tested and approved by The Woolmark Company for machine- and handwashable
wool.Select spin speed according to the manufacturer‘s recommendation on the care label.

Normally soiled cotton jeanswear and garments made of jeanslike material such as trousers
and jackets.

Normally to heavily soiled and robust cotton laundry.

Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in
addition to your detergent

White and pastel shaded garments made of delicate fabrics.

Gentle wash programme to avoid graying or yellowing of your laundry. Use heavy duty detergent, if
necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a liquid detergent for
dark garments with this program.

Heavily soiled and robust laundry made of cotton, synthetics and their blends. Economical energy
consumption by prolonged wash duration - ideal to be run overnight to profit from more favourable energy rates. Avoid noise
of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by defining programme start
with “Start delay” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with a very low water consumption. Use liquid detergent and the lowest
recommended amount for 3kg laundry. Do not use softener.

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

Refresh programme. Use lowest recommended detergent amount.

6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

Rinse and intensive spin programme.

6.0
Same as the last rinse and the final spin in the “Cotton” programme.

Type of wash / Notes

Detergents and additives Options

Pre-

Main

wash

wash

- Respect the manufacturer's recommendations on the care label

– Yes

i

i

i

– Yes

i

– Yes

i

i

– Yes

– Yes – – – –

– Yes

– – – – – –

– –

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for
the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are
washed according to the instructions on the garment label and those issued in this programme chart.

M0703

Softener Clean+ Rapid Pre-

– – –

i

Yes

i i i i i i i i

Yes

i i i i i i i i

Yes

Yes

Yes

Yes

– –

i

– – –

i

i i i i i

– – –

i

– –

i

– –

i

– – –

i

wash

i i

i i

i i

Start

Intensive

delay

i i i i

i

i i i i

i i i i

i

– – –

i

i

i

– – –

i

i i i i

Whirlpool is a registered trademark of Whirlpool USA.

Rinse

hold

i i

i i

i i

i i

i i

i i

i i

Spin

1000

1000

1000

i

rinse

–

–

–

–

–

–

–

– –

5019 312 11089

Max
spin

speed

rpm

Max.

Max.

Max.

Max.

Max.

Max.

Max.

Max.

Max.

Max.

Max.

1)

1)

1)

CONSUMPTION DATA

Programme

Mixed 40 3.0 40 0.45 1:00 –
White 40 6.0 48 0.75 2:45 –

Light colours 40 4.0 70 0.55 1:20 –

Dark 40 4.0 41 0.58 1:44 –

Cotton 95 6.0 55* 1.90 2:00 –
Cotton** 60 6.0 48 0.90 3:30 2:30
Cotton** 60 3.0 35 0.78 2:30 ***

Cotton 40 6.0 48 0.70 2:30 2:05
Cotton** 40 3.0 35 0.57 2:05 ***

Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 40 0.50 1:50 0:59

Delicates 40 1.5 50 0.55 0:45 –

Wool/Handwash 40 1.0 40 0.55 0:35 –

Jeans 40 5.0 64 0.70 2:43 2:18
SupeEco 60 6.0 55 0.78 4:00 –
AquaEco 40 2.5 19 0.45 1:00 –

Speed 15 30 3.0 30 0.15 0:15 –

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programmes for Energy Label.
*** Automatic adaption of programme duration after detection of wash load.

Tempe-

rature

(°C)

ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME

Add detergent as indicated an the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.

1. Turn the programme selector to the desired
programme. The display shows the programme
duration in hours and minutes as well as the
predefined temperature. The “Start(Pause)”
button flashes.

2. The temperature can be altered by pressing the
“Temperature” button.

3. The indication lamp of the predefined spin speed
lights up; in case you want to set another spin speed,
press the “Spin” button.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the
respective indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.

“Clean+” button

• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it
will optimize the additive’s efficiency to get better
wash performance and stain removal.

• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option). Respect the

Load

(kg)

Water

(l)

Energy

without “Rapid”

(kWh)

Approx. Programme Duration (hrs : min)

without “Rapid” with “Rapid”

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches
on oxygen basis. Chlorine or perborate bleaches

must not be used!
“Rapid” button

• Enables quicker washing by shortening the
programme duration.

• Recommendable for small loads or only lightly soiled
laundry.

“Prewash” button

• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.

• Do not use liquid detergent for the main wash when
activating the Prewash option.

“Intensive Rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very
soft water, washing baby linen and helping people
with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.

• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave items to
soak for too long.
Note: The programme stops to “Rinse hold” at the
time the “Rinse hold” light in the programme
sequence indicator is on. The indication lamp next to
the “Start(Pause)” button flashes.

manufacturer’s dosing instructions.

Terminate the “Rinse hold” option:

• Press the “Start(Pause)” button; the programme
will terminate automatically with the final spin cycle
for the present wash programme.

• If you do not wish to spin the clothes, press and hold
the “Reset/Drain“ button for a few seconds to start
the drain programme.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.

START DELAY

The “Start delay” button allows to run the machine at
the consumer's convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay
time up to 23 hours;

• Press the “Start(Pause)” button.
The indication light over the “Start delay” button
flashes and the countdown of the delay time begins.
The dot between hours and minutes of the delay
time indicated flashes.

• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.

• Once having pressed the “Start(Pause)” button,
the number of hours preselected can be reduced by
pressing and holding the “Start delay” button. From
1 hour on, the delay time can also be reduced in
steps of 10 minutes.

To cancel the “Start delay”
..before you press the “Start(Pause)” button:

• Turn the programme selector to another position
or press the “Reset/Drain” button.

..after having pressed the “Start(Pause)” button:

• Press “Start (Pause)“ - the delay time disappears
from the display; press “Start (Pause)“ again to
start the selected programme immediately.

PROGRAMME START

Open the tap and press the “Start(Pause)” button.
The indication lamp next to the “Start(Pause)” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due
to variations in load and temperature of inlet water, the
remaining time is newly calculated in certain programme
phases. If this is the case, an animation appears on

the time display.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the
interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start(Pause)” button to pause the
programme. The light flashes.

2. Select the new programme, temperature, any
options and another spin speed if you want.

3. Press the “Start(Pause)” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL A RUNNING PROGRAMME BEFORE
THE END

The “Reset/Drain“ button cancels a programme before
the end.

• Press the “Reset/Drain“ button for at least 3
seconds. The water is drained out; it may last a while
until you can open the lid.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 11089