Whirlpool AWE 7226 P Product Sheet

GB

A. Programme selector

B. Time display

C. “Start delay” button

D. “ Variable spin” button

E. “Start/Pause” button

F. Programme sequence indicator

G. “Reset” button

H. “Door open” indication

Programme

Cotton/

Antibacterial

95°C

Cotton

40-60°C

Overnight

60°C

Synthetics

30-40-60°C

Delicates

30-40°C

Daily load

40°C

Speed 15’

30°C

Wool/Handwash

20-40°C

Eco Cotton

40-60°C

Rinse & Spin

Spin Wirowanie

Drain Wypompowanie

Bawełniane

95°C

Bawełniane

40-60°C

Nocne

60°C

Syntetyczne

30-40-60°C

Delikatne

30-40°C

Codzienne

40°C

Szybki 15’

30°C

Wełniane/

Pranie rêczne

20-40°C

co Bawelna

40-60°C

Plukanie i
wirowanie

Szybkie

Clean +

Type of wash / Notes

on the care label

Care

Labels

Max.
Load

- for temperature selection, respect the manufacturer's recommendations

kg

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.

6.0

Selecting “Cotton 90°, this programme eliminates bacteria, ensuring sanitization of
your laundry. The bacterial removal efficiency has been tested following a similar
methodology to the NF EN 13697 standard of Nov. 2001

Heavily soiled and robust laundry made of cotton, synthetics and their blends.
Economical energy consumption by prolonged wash duration - ideal to be run
overnight to profit from more favourable energy rates. Avoid noise of spinning at

6.0
night by setting the spin speed to “0” and start spin programme in the morning, or

by defining programme start with “Start delay” accordingly. - For garments with a
high share of synthetic fibres, we recommend to use a laundry net.

Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira),

3.0
polyamide (Perlon, Nylon) or blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

3.0 Lightly to normally soiled textiles made of cotton and/or synthetics.

Briefly worn clothing made of cotton, artificial fibers and blends with cotton.

3.0
Refresh programme. Use lowest recommended detergent amount.

Woolens, labelled with the Woolmark and identified as machine washable, as well
as textiles made of silk, linen, wool and viscose marked as handwashable

1.0

This programme is tested and approved by The Woolmark Company for machine­and handwashable wool. Select spin speed according to the manufacturer‘s
recommendation on the care label

Normally soiled cotton laundry.
Most favourable programme in terms of combined water and energy consumption

6.0
for washing cotton laundry.

- Reference programme for the Energy Label.

Rinse and intensive spin programme.

6.0

–

–

–

Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

6.0
programme.

Drain only - no spinning. Alternative method of terminating programme after

6.0
“Rinse Hold”.

PROGRAMME CHART

Pranie

wstepne

J

K

Odkrec kran

Wyczysc filtr

Wstepne

Wypompowanie

i wirowanie

co

Bawelna

Welniane/
Pranie reczne

Szybki

Codzienne

Wirowanie
Plukanie

40°

60°

20°

Zasadnicze

40°

Stop

Plukanie

plukanie

95°

30°

40°

A

F

Wirowanie

Wypompow.

Bawelniane

60°

G

40°

60°

Nocne

60°

Syntetyczne

40°

30°

40°

Delikatne

Detergents and Additives Special options Max.

Pre-

wash

i

–

i

i

–

–

–

–

– –

H

Pozostaly czas

Drzwi otwarte

Serwis

godz.min.

I

Anulowanie

Opóznienie

startu

Start

(Pauza)

E

C

Main

Softener Clean+ Rapid

Wash

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

i i i i i i i i

i

i i i i i i i i

i

i

i

i

i

i

B

Super

Stop

plukanie

plukanie

Wirowanie

D

Szybkie

– – –

– –

– – –

– – –

– – –

– – –

– – –

Pre-

wash

Pranie

wstêpne

i i

– – – – – –

–

– – – –

–

This washing machine is equipped with

automatic safety functions which detect and

diagnose faults at an early stage and react

appropriately:

I. “Service” indication

J. “Water tap closed” indication

K. “Clean pump” indication

Acustic noise level :

Washing - 59 dB(A) / 1pW
Spinning - 1200, rpm, 76 dB(A) / 1pW
1100,1000, rpm, 75 dB(A) / 1pW

Start

delay

Opóźnienie

startu

Intensive

rinse

Super

płukanie

Rinse

Hold

Stop

płukanie

Spin

Wirowanie

i i i i

–

i i

i i i i

i

i

–

–

i i

i i

i i i i

i i i i

i

i

– –

i

– – – –

Spin

Speed

rpm

max.

max.

1000

1000

max.

max.

1000

max.

max.

max.

1)

1)

1)

i: optional / Yes : dosing required

1)

For improved garment care, spin speed is restricted in these programmes.

The wool/handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark

garments labelled as “machine wash” or “hand wash”provided that the garments are washed according to the instructions on the
garment label and those issued in this programme chart.

M0703

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 11172

CONSUMPTION DATA

Programme

Cotton/Antibacterial 95 6.0 55* 1.90 2:00 1:50

Cotton 60 6.0 48 1.14 2:30 1:45
Cotton 40 6.0 48 0.64 2:15 1:30

Overnight 60 6.0 55 0.78 4:00 ­Synthetics 60 3.0 50* 0.90 2:05 1:14
Synthetics 40 3.0 40 0.50 1:50 0:59

Delicate 40 1.5 50 0.55 0:45 ­Delicate 30 1.5 50 0.50 0:41 -

Daily load 40 3.0 40 0.45 1:00 ­Speed 15’ 30 3.0 30 0.15 0:15 -

Wool/Handwash 40 1.0 40 0.55 0:35 ­Wool/Handwash 20 1.0 40 0:10 0:30 -

Eco cotton** 60 6.0 48 0.90 3:30 ­Eco cotton** 60 3.0 35 0.75 2:20 -

Eco cotton 40 6.0 48 0.70 2:30 -

Eco cotton** 40 3.0 35 0.53 2:00 -

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer
to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programmes for Energy Label.

ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME

1. Load the machine, close the drum doors and check

that they are properly locked.

2. Add detergent and eventual additives as described on

the front page and in your Instructions for use.

3. Close the lid.

4. Turn the programme selector to the desired

programme and temperature. The time display
shows the duration of the chosen programme (in
hours and minutes), and the lamp next to the “Start/
Pause” button blinks. The indication lamp of the
predefined spin speed lights up.

SELECT ANY DESIRED OPTION

Temperature

(°C)

Load

(kg)

Water

When the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of options
are deselected automatically.

“Clean+” button

• Choose this option if you use an in-wash additive

for stain removal (powder, for example “Vanish”)

- it will optimize the additive’s efficiency to get
better wash performance and stain removal.

• Selectable for programmes “Cotton” and

“Synthetics”; choose temperature of 30 or 40°C
and use with maximum load.

• Add an appropriate amount of in-wash additive

for stain removal (powder) to the main wash
chamber, together with your detergent (only use
powder detergent with this option). Respect the
manufacturer’s dosing instructions.

Energy
without

“Rapid”

(l)

(kWh)

• Prolongs the programme by approx. 5 to 15
minutes.

• Appropriate for use of stain removers and
bleaches on oxygen basis. Chlorine or

perborate bleaches must not be used!

“Rapid” button

• Enables quicker washing by shortening the
programme duration.

• Recommendable for small loads or only lightly
soiled laundry.

“Prewash” button

• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.

• Do not use liquid detergent for the main wash
when activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helping
people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.

• This option is particularly recommended for
the “Synthetics”, “Daily load” and “Delicates”
programmes.

• It is useful if you want to postpone spinning to a
later time, or if you want to drain out only.

• If you select “Rinse Hold”, do not leave items to
soak for too long.

Approx. Programme Duration

(hours : minutes)

without “Rapid” with “Rapid”

• As soon as the appliance stops in the rinse hold,
the “Rinse hold” lamp of the sequence indicator
lights up and the lamp next to the “Start/Pause”
button flashes.

Terminate the “Rinse Hold” option:

• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.

• If you do not wish to spin the clothes, turn
the programme selector knob to the “Drain”
programme and press the “Start/Pause” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning

is cancelled but intermediate spin peaks remain
during the rinse. The water is drained out only.

START DELAY

The “Start delay” button allows to run the machine
at the consumer’s convenience, for example at
night when electricity is cheaper. Do not use liquid
detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay

time up to 23 hours;

• Press the “Start(Pause)” button. The indication
light over the “Start delay” button flashes and
the countdown of the delay time begins. The dot
between hours and minutes of the delay time
indicated flashes.

• The time delay indication disappears when
the programme starts and it is replaced by the
remaining programme time.

• Once having pressed the “Start(Pause)” button,
the number of hours preselected can be reduced
by pressing and holding the “Start delay” button.
From 1 hour on, the delay time can also be
reduced in steps of 10 minutes.

To cancel the “Start delay”
..before you press the “Start(Pause)” button:

• Turn the programme selector to another position
or press the “Reset” button.

..after having pressed the “Start(Pause)”
button:

• Press “Start (Pause)“ - the delay time disappears
from the display; press “Start (Pause)“ again to
start the selected programme immediately.

PROGRAMME START

Open the tap and press the “Start(Pause)” button.
The blinking light next to the “Start(Pause)”
button becomes constant. The programme sequence
indicator shows the current programme phase,
running from left to right through Wash, Rinse, Spin/
Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the
lamp lights to show the the lid can be opened. As
long as a wash programme is running, the lid remains
locked and must on no account be forced open.
In case you have an urgent need to open it during
a running programme, refer to “Cancel a running
programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for
Use”; if the fault persists, contact our After Sales
Service.

“Water tap closed”

The appliance has no or insufficient water supply.
Open the water tap: if the indications still lights
up, refer to the “Troubleshooting Guide” in the
Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned:
in the latter case refer to the Instructions for Use
(“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the
interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start(Pause)” button to pause the
programme. The light blinks.

2. Select the new programme, temperature, any
options and another spin speed if you want.

3. Press the “Start(Pause)” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL A RUNNING PROGRAMME BEFORE
THE END

The “Reset” button cancels a programme before
the end.

• Press the “Reset” button for at least 3 seconds.
The water is drained out; it may last a while until
you can open the lid.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 11172