Whirlpool AWA 852 INSTRUCTION FOR USE
1) Programme duration
figures (guideline) are
valid for maximum
temperature wash with
no special functions.
GB
Rinse Hold
AWA 852
PROGRAMME TABLE
Programme Type of fabrics / Degree of soiling / Notes Max.
Prewash
Prélavage
Cotton 60°C
Coton 60° C
Coloured 60° C
Couleurs 60° C
Synthetics 40° C
Synthétiques 40° C
Rinse+Spin
Rinçage +
Essorage
Spin
Essorage
Delicate 40° C
Délicat 40° C
Wool
Laine
Rinse + Spin
Rinçage +
Essorage
Spin
Essorage
Drain
Vidange
Heavily soiled, hard wearing and temperature stable textiles in
cotton and linen (bed linen, table linen, underwear, shirts etc.).
The max. load for heavily soiled laundry is 3.5 kg.
Averagely soiled, hard wearing and temperature stable textiles
in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Averagely soiled blouses, shirts, etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or cotton blends.
Lightly soiled blouses, skirts, etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or cotton blends.
Programme for treating wash with starch or softener.
Terminates with an intensive spin cycle.
Programme for Intensive spin cycle. 5.0
Delicate curtains, dresses, skirts, shirts and blouses. 1.5
Only machine washable woollens with pure new wool label.
If you select the special function “Rinse Hold” do not leave
garments to soak for too long.
Programme for treating wash with starch or softener.
Terminates with a gentle spin cycle.
Programme for gentle spin cycle. 1.5
Drain only, without spin cycle. Alternative way of terminating
programmes with “Rinse Hold” setting.
Load
Detergent and Additives Options Temperature
Pre-
wash
Wash Softener
Bleach
Half
Load
Rinse
Hold
Selector
Maximum
technical
Spin
Speed
Recommended
Spin Speed
Recommended
kg
5.0 Yes Yes
5.0
2.0
2.0
5.0
—
—
—
——
Yes
Yes
Yes
—— — ——— —
Yes
Yes
1.0
—
—
❉❉❉❉
❉❉❉❉
❉
❉
❉
❉
❉
—
—
—
——
——
❉❉
❉❉
❉❉
❉
❉
Position
cotton 90° 850 850 130
Normal to
cotton 90°
cold to Normal 850 500 to 850 100
cold to Normal 850 500 to 850 70
cold to Normal 850 500 to 850 20
cold to Normal 700 100 to 400 55
cold to Normal 700 100 to 400 45
rpm/min
850 850 115
850 500 to 850 10
rpm/min
1.5
——
❉
——
—— — ——— —
———— ——— — — —
cold to Normal 700 100 to 400 15
❉
700 100 to 400 5
Programme
duration
approx.
min 1)
3
N.B. The excess of detergent in the dispenser could cause technical problems.
5019 100 12652
GB
CONSUMPTION DATA
Programme Temperature
selector
(Position)
Cotton 90° C Cotton 90° 5.0 72 1.8 115
Cotton 60° C Normal 5.0 69 1.15 115
Coloured 60° C Normal 2.0 66 0.8 100
Synthetics 40° C Normal 2.0 54 0.4 100
Delicate 40° C Normal 1.5 70 0.65 55
Wool Normal 1.0 70 0.55 45
Pre-wash cycle increases programme duration by approx. 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values
in the table in relation to the water supply pressure and temperature, the load and the type of wash.
Load
(kg)
Water
(l)
Energy
(kWh)
Programme
duration
(min)
ADDING DETERGENT AND ADDITIVES
Add the detergent and the additives into the dispenser as
follows:
• Programme with pre and main wash
• Main wash programme without pre-wash
• Fabric softeners and conditioners
• Chlorine bleach
• Stain remover agents
• Anti-scale agents (water hardness 4)
Important:
• Be careful not to fill more than the
“MAX”
level mark.
• For programme with pre-wash: do not use liquid
detergents.
• For programmes without prewash from cold to 40° C, it is recommended to use a liquid
detergent to avoid whitish residues on the coloured laundry.
CLOSE THE DOOR AND SELECT THE PROGRAMME
1. Turn the
2. Turn the
a.)
b.)
c.)
3. Turn the
programme selector knob
temperature selector
Cold Position
Normal Position
: the programme is running without heating.
: the programme is running normally with the selected
clockwise to the desired programme.
on the desired position: Cold, Normal, Cotton 90°C.
programme/temperature.
Cotton 90° C
: the washing temperature of the programme Cotton 60° C is put up
to 90° C. Especially suitable for heavily soiled laundry.
spin speed selector
on the required setting.
PRESS THE BUTTON CORRESPONDING TO THE REQUIRED OPTION
“Half Load” button
• Reduces water consumption in the cotton and synthetics programme, above all during
prewash and rinse.
• Especially suitable for lightly soiled or small loads (reduce the detergent quantity).
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the spin cycle to
avoid creasing and prevent colours from changing.
• This option is particularly recommended for the programme “Synthetics” or “Delicate”.
• This function is particularly useful if you want to postpone spinning to a later time or
when you do not wish to spin the clothes.
Note:
The programme selector knob stops on the position “”.
Terminate the programme:
• Press the “Rinse Hold” button again; the programme will terminate automatically with
the spin cycle corresponding to the previously selected wash programme.
• If you do not wish to spin the clothes, switch off the appliance by pressing the “
On/Off
button.
• The pilot light goes out.Turn the programme selector to the drain position and switch
on the appliance.
PROGRAMME START
Open the tap and press the
“On/Off”
button. The pilot lamp lights up.
DOOR LOCK
During the running programme the door cannot be opened.
The door locks automatically in all programmes. If the programme is stopped or the
electrical power supply is terminated, the door lock will open after approximately 1 minute.
PROGRAMME END
• The programme selector knob is at the end of the cycle.
1. Press the
“On/Off”
button.The pilot light goes out.
2. Cancel the special options by pressing the corresponding buttons.
3. Turn the water supply tap off.
4. Wait for the door to unlock (about 1 minute).
5. Open the door and the drum flaps and unload the machine.
SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER
PROGRAMME START
1. Press the
2. Select the new programme, temperature position, spin speed and options.
3. Press the
“On/Off”
“On/Off
button to switch off the appliance.The pilot light goes out.
” button to switch on the appliance. The pilot lights up.
TO STOP,RESET A PROGRAMME BEFORE THE END
1. Press the
2. Set the programme selector to Drain.
3. Press the
Only open the door when the programme selector is at the end of the cycle and the
door is unlocked (after approximately 1 minute).
“On/Off”
“On/Off”
button to switch off the appliance.
button to start the drain programme.
”
5019 100 12652
Loading...