Whirlpool AWA 5051 INSTRUCTION FOR USE

AWA 5051

Programme Type of wash / Notes

Prélavage

Cotton with

Prewash

Coton 60°

Cotton

Couleur 60°

Coloured

Synthétique 40°

Synthetics

Rinçage

Rinse + Spin

Essorage

Spin

Délicat 40°

Delicate

Laine

Wool

Rinçage

Rinse + Spin

Essorage

Spin

Vidange

Drain

For obtaining the 90°C temperature, press the “Intensive Wash 90°” option button.

Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resistant cotton.

The maximum load for heavily soiled washing is 3.5 kg.

Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high temperature resistant cotton.

Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or cotton blends.

Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton blends.

This programme allows starch or softener to be added. It is followed by an intensive spin cycle.

Programme for intensive spin cycle.

Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.).

Machine washable woollens with pure new wool label.

If the “Rinse Hold” option is selected don't leave the wash to soak for too long. This programme allows starch or softener to be added.

It is followed by a gentle spin cycle.

Programme for gentle spin cycle.

Drain only, without spin cycle. Alternative way to end programmes after a “Rinse Hold”.

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

“Marche/Arrêt”

Max. load

Prewash Main

5.0 Yes

5.0

2.0

5.0

1.5

1.0

1.5

——

—

On/Off

Programme duration figures (guideline) are valid for maximum temperature wash with no special functions.

❉

: option / Yes: dosing required

Do not use liquid detergents.

Detergents and additives Options Tempe-

Wash

Yes

—

——— ————

Yes

—

——— ————

——— —————

Softener Bleach Intensif 90° Charge

Intensive

Wash 90°

Reduite

Load

❉❉❉❉❉

❉❉❉❉❉ ❉ ❉ ❉

❉ ❉ ❉

——

———

————

———

Arrêt Cuve

Pleine

Half

Rinse

Hold

❉❉ ❉❉ ❉❉

Whirlpool is a registered trademark of Whirlpool USA.

rature

60/90* 500 130

60/90* 500 115

Cold 500 20

❉

Cold 500 15

❉

Maximum

Spin

Speed

°C

rpm

60 500 100

40 500 70

500 15

40 500 55

40 500 45

500 10

5019 312 10002

Programme

time

approx.

min.

ENERGY AND WATER CONSUMPTION DATA

Programme Temperature

Load

Water

Energy

Programme time

(°C)

(kg)

(l)

(kWh)

(min)

Cotton 90 5.0 72 1.80 115

Cotton 60 5.0 72 1.15 115 Coloured 60 2.0 66 0.80 100 Coloured 40 2.0 66 0.40 100

Synthetics + 1/2 Load 30 1.0 54 0.30 70

Delicate 40 1.5 70 0.65 55

Wool 40 1.0 70 0.55 45

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the “Energy Label” refer to the programme “Coloured Cotton 60°C”. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

PREPARATION OF WASH CYCLE PRESS ANY DESIRED OPTION BUTTON(S)

1. Close the drum flaps and check that they are properly locked.

2. Add detergents and additives into the dispenser to no more then the

“MAX“

level mark, as

follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the

programme selector knob

clockwise to

the desired programme.

Intensive Wash 90° button

• This option allows to put the washing temperature to 90° C instead of 60° C for the

“Cotton” programmes.

• Especially suitable for heavily soiled laundry.

Half Load button

“Charge Reduite”

• Reduces the water consumption in the “Cotton” and “Synthetics” programmes especially during the rinse.

• Especially suitable for lightly soiled or small loads (reduces the quantity of detergent).

• Not suitable for high temperature programmes.

Rinse Hold button

“Arrêt cuve pleine”

• The laundry remains in the last rinse water,

“Intensif 90°”

without progressing to the spin cycle to avoid creasing and prevent colours from changing.

• This option is especially recommended for the “Synthetics” or “Delicate” programmes.

• This option is perfectly suitable if you wish to

postpone the spin or you don't wish to spin the clothes.

Note:

the programme selector stops on ““.

Terminate the “Rinse Hold” option.

• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle corresponding to the previously selected wash programme.

• If you do not wish to spin the clothes, switch off the appliance by pressing the

“On/Off”

button. The pilot light goes out. Turn the programme selector to the “Drain” position and switch on the appliance.

PROGRAMME START

Open the water inlet tap and press the

“On/Off”

button. The pilot lamp lights up.

DOOR LOCK

During the running programme, the door cannot be opened. The door locks automatically in all programmes. If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.

PROGRAMME END

• The programme selector knob is at “STOP”, the

pilot lamp lights.

1. Press the

“On/Off”

button. The pilot light

goes out.

2. Cancel the options by pressing the appropriate

buttons.

3. Turn the water supply tap off.

4. Wait for the door to unlock (about 1 minute).

5. Open the door and the drum flaps and unload

the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Press the

“On/Off”

button to switch off the appliance. The pilot light goes out.

2. Select the new programme and options.

3. Press the

“On/Off”

button to switch on the appliance. The pilot light lights.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the

“On/Off”

button to switch off the appliance. The pilot light goes out.

2. Set the programme selector on “Drain”.

3. Press the

“On/Off”

button to start the “Drain” programme. Only open the door when the programme selector is at “STOP” and the door is unlocked

(after approximately 1 minute).

NOTES AND INDICATIONS FOR USE

• After switching your washing machine on, it does not start immediately: it needs some seconds in order to lock the door, fill water and then drum starts turning.

• Spinning has an interrupted start-up: the drum starts and stops running several times, to improve spin efficiency and to better balance the laundry.

• At the end of the spinning cycle the drum goes on reversing for some minutes: this helps you unloading the laundry.

• Do not exceed in detergents dosage: excessive foam formation may prevent spinning.

• The turning of the drum is stopped in several steps of the washing cycle due to optimization of energy consumption.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10002