Whirlpool AVM 210 WH Service Manual

[~

= -l ~WJ r8j '. Whirlpool Euro~e A VM 210 WH

~ .1 i.'J ~ .Customer Services

~

Whirlpool

Service Manual

M icro-wave-oven

AVM 210 WH

Model AVM 210 WH

Version 8538 210 01291

Introduction, safety 481271490015

Technical data 481271458005

Spare parts list 4812 714 80443

Exploded view 4812 714 68005

Wiring diagram 4812 714 78006

Program diagram 481271478007

r-

.! .-,

'.

This documentation is only intended lor qualilied technicians who are aware 01 the respective salety re-

gulations.

Date: 24. tO.1994
Document-No.: 48t2 714 10369 Subject to modification

Register Nr.:

~--- ~ ---""

481271490015

INTRODUCTION

Before leaving the factory each oven is carefully checked.

It must however, be installed and used correctly.

Despite all the steps taken to make the oven safe, the safety is dependent on the correct installation and the fact
the user understands how to use and maintain the oven.

The information in this section should be used as areminder that the oven is safe and that anyone who uses it must
first read the instructions tor use in order to be able to use the oven correctly and obtain best results.

SAFETY

To avoid injury to yourself and damage to the appliance always work to the following rules when servicing an oven.

.Always disconnect the plug tram the mains before starting work.

.If there is no plug switch off the electric supply at the control box.

.When you have finished servicing an oven before you reconnect it to the mains, make sure that:

-all the internal connections are correct

-the wires are insulated and not touching the door or the cabinet or anything sharp

-all the earth connections are electrically and mechanically sound

-do not modify or anyway interfere with the safety devices built-in to the oven

-make sure that each replacement part you use conforms to the manufacturer's specifications

.00 not start arepair if you have any doubt as to your ability to complete it.

CAUTION -MICROWAVE RADIATION

PERSONNEL SHOULD NOT BE EXPOSED TO THE MICROWAVE ENERGY WHICH MAY RADIATE FROM THE
MAGNETRON, WAVEGUIDE OR ANTENNA IF THEY ARE IMPROPERL Y USED OR CONNECTED. ALL INPUT
AND OUTPUT MICROWAVE CONNECTIONS, WAVEGUIDES, FLANGES AND GASKETS MUST BE SECURE.
NEVER OPERATE THE DEVICE WITHOUT A MICROWAVE ENERGY ABSORBING LOAD ATTACHED.

NEVER LOOK INTO AN OPEN WAVEGUIDE OR ANTENNA WHILE THE DEVICE IS ENERGIZED.

NEVER OPERATE AN OVEN WITH CABINET OFF WITHOUT MEASURING THE MICROWAVE LEAKAGE
AROUND MAGNETRON AND VISIBLE MICROWAVE CONNECTIONS (WELDING JOINTS).

.00 not operate the oven if the following conditions exist:

-the door does not Glose firmly against the door support because of the door being warped or the hing es damaged.

-The door trims or seals are damaged.

-If there is any visible damage to the oven.

-if the door does not Glose properly. "

-.

Avoid operating the oven if known components in the interlock system, oven door or microwave

generating assembly are known defective. They must be replaced.

WARNING -HIGH Val TAGE

IT IS POSSIBLE TO GaME IN CONTACT WITH LETHAL HIGH VOLTAGE WHEN WORKING WITH
HV TRANSFORMER, HV CAPACITOR AND MAGNETRON. THEREFORE NEVER TRY TO MEASURE

THE HIGH VOLTAGE. ALWAYS TAKE UTMOST CARE WHEN PERFORMING ELECTRIC

MEASUREMENTS INSIDE THE OVEN.

Technical data 481271458005

1. Cabinet dimensions

Height 330 mm

Width 553 mm

Depth 485 mm

2. Cavity dimensions

Height 225 mm

Width 372 mm

Depth 390 mm
Volume 34 I
Turntable diameter 360 mm

3. Weight

Net 23 kg

Packed 26 kg

4. Electrical details

Voltage 230-240/50 V/Hz

Power consumption 2600 W

Current consumption 11 A
Quarzgrill 1200 W

Output power microwave 950 +/- 50 W
Microwave frequency 2450 MHz

Fuse 16 (SA) A

13 (GB) A

Timer 90 min. mec.

5. Accessories

Grill grid

Spacer

Crisp plate

~ -