Whirlpool AQUASTEAM 1480 INSTRUCTION FOR USE
30106333GB.fm Page 1 Wednesday, December 2, 2009 12:14 PM
GB PROGRAMME CHART
A. “On/Off” button
B. Programme selection buttons
C. Option buttons
D. “Start (Pause)” button
E. “Special programmes” button
F. “Temperature” button
G. “Start delay” button
H. “Variable spin” button
(incl. “Rinse hold” )
I. “Reset/Drain” button
J. “Favourites” button
Programme
Cotton
Synthetics
Delicates
Wool
Handwash
Big Items
Sport
SuperEco
Daily
load
Quick wash
Rinse & Spin
Spin
Jeans
Lingerie
Steam
Auto Clean
Steam Refresh
SPECIAL PROGRAMMES
❉
optional / Yes : dosing required
:
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Only selectable within the temperature range of 40 to 60°C.
3DPXNOX
6HQWHWLNOHU
1DULQOHU
<QOOHU
(OGH\ÕNDPD
%\NoDPDúÕUODU
6SRUNÕ\DIHWOHU
*QON
oDPDúÕU
Tempe-
rature
20 - 95 °C
20 - 60 °C
20 - 40 °C
20 - 40 °C 2.0
20 - 40 °C 2.0
20 - 60 °C
20 - 30 °C
20 - 60 °C
20 - 60 °C
20 - 30 °C 6.0
——
——
20 - 60 °C
20 - 30 °C 2.0
———
—
Care
Labels
C
Max.
Load
kg
- Respect the manufacturer’s recommendations on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
9.0
made of cotton and linen.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
3.5
polyamide (Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
2.5
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for
machine washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.
Blankets made of synthetic fibres; bed covers filled with feathers, polyester or
3.0
other artificial fibers; sleeping bags, bathmats and similar items.
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.
This programme includes a prewash cycle – you can add detergent also to the prewash
3.5
chamber. Do not add any softener.
Normally to heavily soiled and robust bed linen, table linen and underwear,
towels, shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prol onged washing duration. Ideal
9.0
to be run overnight to additionally profit from the more favour able energy rates. To
avoid noise of spinning at night, set spin speed to “0” and start spin programme in the
morning, or define programme start with “Start delay” accordingly.
Slightly to normally soiled textiles made of cotton and/or synthetics.
6.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends
with cotton.
Same as the last rinse and the final spin in the “Cotton” programme.
9.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
9.0
Normally soiled cotton jeanswear and garments made of robust jeanslike material
7.0
such as trousers and jackets.
This programme is particularly suitable to treat delicate lingerie (use of a laundry
net strongly recommended).
Self-cleaning programme. Cleans the interior of your washing machine and thus
helps to avoid smells or deposits. Run this programme regularly if you never or
seldom wash your laundry at temperatures over 60°C or if your washing machine
has not been in use for a long time.
During this programme “St” appears on the display.
Clean and dry laundry items made of cotton and/or synthetics which were already used.
Refreshes, reduces smells, moderates creasing and makes the items ready to wear or use
1.0
within 20 minutes. After programme end, immediately put the laundry on hangers for 10
minutes before using. During this programme “St” appears on the display.
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702
B
{
Type of wash/Notes
I
D
A
IMPORTANT: Do not load any laundry!
K. Programme sequence indication
N
K
E
F G H
M
}
L
{
C
Detergents and additives Special options
Pre-
Main
wash
❉
❉
❉
—
—
❉
❉
—
—
—
——
Softener Steam Stain
wash
Yes
❉❉ ❉❉❉❉❉❉❉
Yes
❉❉ ❉❉❉❉❉❉❉
Yes
❉
Yes
❉
Yes
❉
Yes
❉
Yes
—— ———
Yes
❉
Yes
❉
Yes
❉
❉
J
Steam
2)
Removal
Sanitization
——❉—— —
——————
——————
——❉——
—————
————
——————
—————
Add garment Programme
L. “Child lock” indication
M. “Detergent overdosage” indication
N. Red failure indication
The buttons of the control panel are touch buttons which
are activated or deactivated by a simple touch with the
fingertip (except the “On/Off” button - it must be
pressed down). When operating a button, there is a quiet
click; touching a button which is not selectable is
answered by a double beep.
Pre-
Eco
2)
wash
gQ
\ÕNDPD
(NR
Easy
ironing
.ROD\
WOHPH
❉❉❉❉
❉❉❉❉
—— — — — —— — —
❉
—
Yes
❉❉ ❉❉❉
Yes
——————
❉
——
—— — — — —— — —
—— — — — —— — —
Whirlpool is a registered trademark of Whirlpool USA
Start
delay
*HFLNPHOL
%DúODWPD
Programme
finished
Spin
Variable
spin
6ÕNPD
+Õ]Õ
in process
Intensive
rinse
<R÷XQ
GXUXODPD
❉❉
❉❉
❉❉
❉❉❉
❉❉❉
❉❉
❉❉❉
❉❉
❉❉
❉❉
——
❉
——
❉
5019 301 06333
Max
Spin
Speed
rpm
max.
max.
1000
1000
400
1000
max.
max.
max.
max.
max.
max.
max.
400
1)
1)
1)
1)
1)
Black process 45.0° 150.0 LPI
30106333GB.fm Page 2 Wednesday, December 2, 2009 12:14 PM
CONSUMPTION DATA
Programme
Cotton 95 9.0 87
Cotton
***
Cotton 40 9.0 82 0.80 2:15
Synthetics 60 3.5 46
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool 40 2.0 60 0.60 0:45
Handwash 40 2.0 45 0.60 0:40
Big Items 40 3.0 74 0.75 1:30
Sport 30 3.5 54 0.55 1:34
SuperEco 60 9.0 80 1.08 4:00
Daily load 40 6.0 73 0.60 1:00
Quick wash 30 6.0 73 0.30 0:30
Jeans 40 7.0 95 0.85 2:31
Lingerie 30 2.0 45 0.35 0:36
Steam Auto Clean — — 11 0.50 0:35
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect
to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).
Steam Refresh — 1.0 0.5 0.20 0:10
Tem p e r atu r e
(°C)
60 9.0 64 1.53 2:30
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for
Use (remove separator in detergent dispenser for use of powder
detergent if necessary).
1. Push the
the programme buttons has finished and only one programme
button lights up. The
2. Select the
corresponding programme button; it is marked by a blue light.
Or select a “special programme” by touching the “Special
programmes” button on the display until the symbol of the
desired programme lights up.
3. The
temperature
can be altered by touching the “Temperature” button or the
“Variable spin” button.
button . Wait until the light loop around
“On/Off”
“Start (Pause)”
desired programme
and
spin speed
button light blinks.
by touching the
indicated on the display
SELECT ANY DESIRED OPTION
If a combination of programme and/or options is not possible, the option
light shortly blinks and and switches off again, and a signal sounds.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• Particularly suitable for areas with very soft water or for
washing baby linen and helping people with allergies.
“Easy ironing” button
• Reduces creasing by an increased water quantity and a very
gentle spin.
“Eco” button
• With a modified temperature profile and a slightly prolonged
washing duration, the optimum combination of excellent washing
result and even lower energy consumption is achieved.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating
the Prewash option.
Load
Water
(kg)
“Steam Stain Removal” button
• Treats the laundry with hot steam during the wash cycle in
order to help removing stains.
• Selectable for laundry made of cotton and/or synthetics within
temperature range of 40 to 60°C.
“Steam Sanitization” button
• Eliminates bacteria and helps sanitizing the laundry.
• Appropriate for cotton and/or synthetic laundry items with
care label within temperature range of 40 to 60°C and up
to a maximum load of 6 kg.
• Prolongs the programme by approx. half an hour to an hour,
depending on the load size.
“Variable spin” button (incl. “Rinse hold” )
• Every programme has a predefined spin speed.
• Touch the button to set another spin speed.
• If you select spin speed “0”, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
drained out only.
• If you select “Rinse hold” , the laundry remains in the last
rinse water without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
- Select “Rinse hold” if you want to postpone spinning
- Do not leave the laundry to soak in the rinse hold for too long.
- The programme stops to “Rinse hold” , when the
- To terminate the “Rinse hold” by draining the water, without
- To terminate the programme by spinning the laundry, touch the
Energy
(l)
(kWh)
2.60 2:20
**
0.85 1:35
**
to a later time or if you want to drain only.
“Rinse hold” symbol on the display blinks; the
button blinks as well.
(Pause)”
any spinning, touch the
“Variable spin” button to select the desired spin speed and then
the
“Start (Pause)”
Approx. Programme Duration
(hours : minutes)
“Start (Pause)”
button to start the spin cycle.
button.
*
“Start
SAVE YOUR FAVOURITE PROGRAMMES
If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just touching one button.
• Select the desired programme, temperature, spin speed and
option(s), touch and hold the
3 seconds. The lamp next to
then lights up - the programme setting is saved.
Next time you want to use your individual programme setting,
select the programme, shortly touch the
start by touching
If you want to replace the saved programme setting by
another one:
• Proceed as already described above - the previously saved
programme setting will be replaced by the new one.
“Start (Pause)”
“Favourites”
“Favourites”
.
button for at least
shortly blinks and
“Favourites”
button and
START DELAY
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
• Select programme, temperature, spin speed and options.
• Touch the “Start delay” button to select a delay time step
between 0:30 and 23:00 hours; a clock symbol appears next to
the delay time on the display.
•Touch the
• The time delay indication disappears when the programme
• The number of hours preselected can be changed by touching
To cancel the “Start delay”
..before you touch the “Start (Pause)” button:
• Touch another programme button or set start delay time to
..after having touched the “Start (Pause)” button:
Set the delay time to “0:00” - the time delay disappears after a few
seconds; or touch
immediately.
“Start (Pause)”
becomes constant.
The countdown of the delay time begins; the clock symbol and
the colon between hours and minutes on the display blink.
starts and it is replaced by the remaining programme time.
the “Start delay” button.
“0:00” - the time delay disappears after a few seconds.
“Start (Pause)”
button; the light stops blinking and
twice to start the programme
“ADD GARMENT” INDICATION
Before starting a programme, the symbol lights to show that the
door can be opened to add more washing. As soon as you press
“Start (Pause)”
programme and must on no account be forced open. In case you
have to open it urgently during a running programme, refer to
“Reset a running programme before the end”.
If you try to start a wash programme and the door is not properly
closed, the “Add garment” indication will blink.
, the door will lock until the end of the
PROGR AMME START
Open the tap and touch the
“Start (Pause)”
garment” indication goes out, and the lit bubbles indicate that the
programme is in process. In some phases, the remaining
programme time is newly calculated - if this is the case, the “6
Sense” indication on the display will fade, and the remaining
programme time is replaced by an animation.
“Start (Pause)”
button light becomes constant. The “Add
button; the blinking
th
CHILD LOCK
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. To activate
the child lock:
• The washing machine has to be switched on .
• Touch the “Temperature” and the “Variable spin” buttons
simultaneously for a few seconds until the key symbol
on the display blinks - the key symbol will light afterwards to
show that the child lock is active.
The programme setting cannot be changed anymore; the only change
possible is to either reset the running programme by touching and
holding “Reset/Drain” for a few seconds, or to switch the wash ing
machine of by pushing
To deactivate the child lock, proceed in the same way as for
activating it.
“On/Off”
.
RED FAILURE INDICATIONS
If one of the red failure indications on the display lights up, refer to
the “Troubleshooting Guide” in your “Instructions for Use”.
PROGRAMME END
• The display shows “End”, and the “Programme finished”
indication lights up.
1. Switch the machine off by pushing
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
• If you do not switch the washer off, the display lights go out
automatically after a few minutes to save energy; only “End”
will remain visible on the display.
“On/Off”
DETERGENT OVERDOSAGE INDICA TION
The symbol will blink at the end of the programme if you used too
much detergent. Use less detergent next time.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Touch the
The light blinks.
2. Select the new programme, temperature, any options and
another spin speed if you want.
3. Touch the
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
“Start (Pause)”
“Start (Pause)”
button to pause the programme.
button again. The new
RESET A RUNNING PROGRAMME BEFORE
THE END
The
“Reset/Drain”
Touch and hold the
the bubbles light in the programme sequence indicator goes out,
and the remaining time on the display is replaced by an animation.
Any existing water is drained out before the door can be opened.
Caution! The washing might still be hot.
button cancels a programme before the end.
“Reset/Drain”
Whirlpool is a registered trademark of Whirlpool USA
button for at least 3 seconds;
5019 301 06333
.
Black process 45.0° 150.0 LPI
Loading...