Whirlpool AKT 842/IX, AKT 842/BA INSTALLATION
AKT 842 PRODUCT DESCRIPTION SHEET
DE GB FR NL ES PT GR IT SE NO DK FI PL CZ SK HU RU
Induction cooking zone Ø 210
1.
Radiant cooking zone Ø 145
2.
Radiant double cooking zone Ø180
2
1
5
3.
3
4
Induction double cooking zone Ø 145
4.
Display
5.
Important:
To avoid permanently damaging the glass ceramic
hob, do not use:
- pots with bottoms that are not perfectly flat,
- metal pots with enamelled bottom.
Any aesthetic defects (scratches, marks etc.) must
be reported at the time of installation.
HOB DIMENSIONS (mm)
TYPE: PLEAM 230 V~/400 V 3N ~ 50 Hz 6.6 kW
TYPE: PLEAM 230 V~ 50 Hz 6.6 kW (for UK only)
5019 319 01143
HOW TO USE YOUR HOB
D
C
B
A
On/Off
B
Heat setting increase
C
Heat setting decrease
D
Fast boil
CAUTION
Important:
causes switching off of the cooking zone (e.g. after approx. 1 hour at maximum heat setting, the cooking zone switches off).
: Before switching on the hob, deactivate the CHILD SAFETY DEVICE by pressing button
To switch the hob on, keep button
If within about 10 sec. none of the cooking zones is activated, the hob switches itself off automatically on safety
grounds.
Press one of the buttons
Select the heat setting required with buttons
Important:
if a cooking pot or pan is not placed on it.
To modify the power of a cooking zone, press the buttons
If the cooking zone is on, it can be switched off by pressing the buttons
Press button
CHILD SAFETY
The
function button. This function locks all the buttons except the hob switching off button
This function remains on even after the hob has been switched off and on again. It can be cancelled by holding
down button
TIMER
The
required cooking zones. To activate the function, press the button with the clock symbol
To programme the timer for a given cooking zone, first select the desired cooking zone using one of the buttons
“B”
. An indicator dot lights up next to the cooking zone selected. Within 10 seconds, set the cooking time using
buttons
The Timer function begins automatically and the red indicator dot remains lit.
At the end of the set cooking time, an acoustic signal sounds. If a cooking zone has been programmed to operate
with the timer, it is switched off and the red indicator dot switches off too.
The timer function can only be used to activate one cooking zone.
To use the “minute minder” function, press the button with the clock symbol
zone to 0 (zero) and then press buttons
When the set time has elapsed, an acoustic signal sounds.
FAST BOIL
The
To activate the function, select a cooking zone with the button
“P”
A
appears on the display.
DOUBLE COOKING ZONE
of the double cooking zone.
RESIDUAL HEAT INDICATOR.
After the cooking zone is switched off, the residual heat indicator
H
“0”
until the hob temperature falls to an acceptable safety level.
The hob's safety features include an automatic switching off function. Prolonged use of the same heat setting
C
B
After setting the required power level, the induction cooking zone is deactivated within 60 seconds
“A”
to switch off all activated plates.
function is switched on by holding down button
“E”
until the dot above the function button switches off.
function (if available) can be used as a minute minder and also for programming the operation of the
“F” +/-
(1-99 min).
function sets a heating level higher than max. to bring water rapidly to the boil.
A
“A”
pressed for approx. 2 seconds. The 4 cooking zone displays show
“B”
corresponding to the cooking zone you intend to use.
“F” +/-
function (if available). Press button
F
C
B
E
Child safety device
F
Timer
G
Activates/deactivates the dual cooking zone
“B”
“C”
or
. Heat settings go from 1 to 9.
“B”
or
to set the desired time.
“B”
E
“C”
.
“B”
“E”
and press the button
“G”
to deactivate or activate the outer ring
“H”
remains on or flashes, alternating with
C
“E”
and
until a dot lights up above the
“F”
G
B
.
“C”
at the same time.
“A”
“F”
, set the power of the cooking
.
“D”.
C
.
B
“0”
.
Loading...