Whirlpool AC1052XS User Manual
use&care guide
AIR
CONDITIONER
Models ACP552XT
ACP602XT
AC0802XS
AC1052XS
F.EEiers Ice Makers Dishwashers BuilMn o.ens and Surface Units Ranges Microwave Ovens Trash Compaclurs Noom Air Conditioners,
Dehumidiliers, Automatic Washers. Clothes Dryers, Freer
Contents
BEFORE YOU USE YOUR
AIR CONDITIONER
Energy Saving Tips..................................................3
HOW TO START & USE
YOUR AIR CONDITIONER
To Start Your Air Conditioner..................................3
Using Exhaust Vent Control
Changing Air Direction
Cleaning and Caring for Your
Air Conditioner
Cleaning Front Panel...............................................4
.................................................
.....................................
...................................
...........................................
.....................................................
Page
Cleaning Filter ..................................................5
2
3
4
5
4
©1989 Whirlpool Corporation
Annual Maintenance
Do-It-Yourself Maintenance
Oiling The Fan Motor
IF YOU NEED SERVICE
OR ASSISTANCE
Before Calling For Assistance ... .7
If You Need Assistance
If You Need Service
If You Have A Problem........................7
If You Need FSP"
Replacement Parts
Page
........................................
.................
....................
......................
............................
..................................
5
7
7
7
Copy your Model and
Serial Numbers here...
When you need service or call with a question,
have this information ready.
1. Complete Model and Serial Numbers.
To find Model and Serial Numbers remove
the front panel (see page 4). The numbers
are located on a label attached to the
evaporator coil cover near the top of the unit.
SERIAL LABEL
Purchase date from sales slip.
2.
Copy this information in the spaces below.
Keep this book, your INSTALLATION
INSTRUCTIONS, and your sales slip
together in a handy place.
Model Number
Serial Number
Purchase Date
BEFORE YOU USE YOUR
AIR CONDITIONER
Read and carefully follow the “INSTALLATION
INSTRUCTIONS” included with your air conditioner.
It is your responsibility to make sure
that your air conditioner:
• Has been properly installed.
• Is the right size for the area you want to cool.
• Has been properly connected to electrical
supply and grounded. (See INSTALLATION
INSTRUCTIONS.)
• Is properly used only for the job for which it was
designed.
• Is not used by anyone unable to operate it
properly.
• Is properly maintained.
To remove the Consumer Buy Guide label and energy
rating label lift one edge and puii straight off.
To remove any remaining glue;
1. Rub briskly with thumb to make a bail, then remove.
-OR-
2. Soak area with a liquid hand dishwashing detergent
before removing glue as described in step 1.
Service Company Name and Telephone Number
Do not use rubbing alcohol or flammable toxic
solvents, such as acetone, gasoline, carbon
tetrachloride, etc. These can damage the material.
Do not use a sharp instrument or any harsh or
abrasive cleaners.
Energy Saving Tips
• Improve home insulation (seal doors, windows,
and close fireplace flue).
• Close blinds or drapes on sunny side of house.
Add window awnings.
HOW TO START AND USE
YOUR AIR CONDITIONER
Keep air filter clean. Don’t block air flow with
drapes or furniture.
Ventilate attic (high temperature levels add to
normal cooling load).
Try not to use heat producing appliances during
the hottest part of the day. Turn lights, radios,
televisions, and other appliances off when not
needed.
Keep heat registers and cool air returns closed
or blocked off so cooled air won’t escape.
Use a vent fan in areas in cooking, laundry or
bathing areas to pull out extra heat and moisture
near its source.
Awarning
Electrical Shock Hazard
Be sure air conditioner control is set to UNIT
OFF before plugging in the unit. Do not use an
extension cord. Piug unit oniy into a grounded
electricai outiet. Failure to do so could result
in personal injury.
EXHAUST VENT
CONTROL
OPEN CLOSED
Quiet Miser
UNIT
OFF
FAN MAX
ONLY COOL
FAN SPEED
CONTROL
QUIET REGULAR
COOL COOL
Whirlpool
To Start Your Air Conditioner
1. Set the EXHAUST VENT CONTROL to CLOSED
for best cooling results.
2. Set the FAN SPEED CONTROL to the desired
setting.
QUIET COOL
REGULAR COOL
MAX COOL
FAN ONL'Y
If you turn your air conditioner off, wait at
least two minutes before turning it back on or
you may biow a fuse or circuit breaker.
3. Turn THERMOSTAT CONTROL to the mid
(Number 6) setting. You can adjust the air
conditioner’s cooling performance by resetting the
thermostat control to a higher number for maximum
cooling. Lower the thermostat for less cooling. You
will need to experiment to find the setting which suits
you best.
.................
.............
..................
.................
Acaution
for sleeping comfort
for normal cooling
for maximum cooling
for air circulation only
THERMOSTAT
When lowering the thermostat control setting, the
compressor (motor) may shut off. When the
compressor is turned off with either the fan speed
control or the thermostat control, wait 2-3 minutes
before restarting the air conditioner or turning the
compressor back on.
Loading...