West Penn FI-4002-15, FI-4002-10ST-LC, FI-4002-10SC-LC, FI-4002-10LC, FI-3002-6LC Specsheet

Fiber Optic Assemblies

• 100% tested

• Optical Multimode 1 (OM1) fiber supporting 200/500 MHz.km OFL at 850/1300 nm.

• Optical Multimode 3 (OM3) fiber supporting 2000 MHz.km EMB at 850 nm.

• Optical Multimode 2 (OM2) fiber supporting 500 MHz.km OFL at 850/1300 nm.

• 10 Gigabit transfers up to 300 feet using 850 nm VCSEL source

• LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with

• Installed duplex clip)

• Maximum Connector Loss: 0.50 dB

• Typical Connector Loss: 0.30 dB

• Typical Return Loss: -25 dB

• Jacket Material: PVC (OFNR riser-rated)

• Jacket OD: 3 mm

• Installation Tensile Load: 100 N (445 lbs)

• Long-Term Tensile Load: 50 N (222 lbs)

• Maximum Tensile Load: 100 N/cm

• Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)

• Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)

• Crush Resistance: 750 N/cm

• Impact Resistance: 1,000 cycles

• Flex Resistance: 5,000 cycles

• Attenuation at 1300 nm: 1.0 dB/km

• Attenuation at 850 nm: 3.5 dB/km

• Operating Temperature: -20°C to +70°C

Part Number Structure:

ST to ST LC to LC SC to SC SC to LC

FI-C002-xx FI-C002-xxLC FI-C002-xxSC FI-C002-xxSC/LC

SC to ST ST to LC

FI-C002-xxSC/ST FI-C002-xxST/LC

Replace (C) with Glass Size: Replace (xx) with Length:

2 – OM1 3 – 3ft
4 – OM3 6 – 6ft
5 – OM4 10 – 10ft
3 – SingleMode 15 – 15ft
30 – 30ft

WEST PENN WIRE | www.westpennwire.com | 800-245-4964 | [e-mail]