This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, see
the front cover of this manual and request a
free replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not be
shown at actual size.
WESLO is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your exercise bike before using your exercise bike.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or persons with pre-existing health problems.
2. Use the exercise bike only as described in
this manual.
3. It is the responsibility of the owner to ensure
that all users of the exercise bike are adequately informed of all precautions.
4. The exercise bike is intended for home use
only. Do not use the exercise bike in a commercial, rental, or institutional setting.
5. Keep the exercise bike indoors, away from
moisture and dust. Place the exercise bike
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is at least 2 ft. (0.6 m) of clearance
around your exercise bike.
6. Inspect and properly tighten all parts regularly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the exercise bike at all times.
8. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exercise bike. Always wear
athletic shoes for foot protection.
9. The exercise bike should not be used by
persons weighing more than 250 lbs.
(113 kg).
10. The pulse sensor is not a medical device.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
11. The exercise bike does not have a free
wheel; the pedals will continue to move until
the flywheel stops. Reduce your pedaling
speed in a controlled way.
12. Always keep your back straight while using
the exercise bike; do not arch your back.
13. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
3
BEFORE YOU BEGIN
hank you for selecting the new WESLO
T
CT 2.0 R exercise bike. Cycling is an effective exercise for increasing cardiovascular fitness, building
endurance, and toning the body. The PURSUIT CT 2.0
exercise bike provides a selection of features
R
designed to make your workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before
you use the exercise bike. If you have questions
Handlebar
Seat
®
URSUIT
P
fter reading this manual, please see the front cover
a
of this manual. To help us assist you, note the product
model number and serial number before contacting
us. The model number and the location of the serial
umber decal are shown on the front cover of this
n
manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
Console
Thumb Pulse Sensor
Resistance Knob
Backrest
Seat Frame
Pedal/Strap
Wheel
Adjustment Knob
Seat Handle
4
M10 Locknut
(65)–2
M8 Locknut
(10)–4
M8 Split
Washer (42)–3
M8 Washer
(54)–4
M6 Washer
(68)–8
M6 Locknut
(63)–4
M4 x 5mm
Self-tapping
Screw (66)–2
M4 x 8mm
Screw (29)–2
M6 x 35mm Button
Screw (61)–8
M10 x 70mm Carriage Bolt (30)–2
M10 x 65mm Button Screw (33)–2
M8 x 20mm Button
Screw (34)–3
M6 Curved
Washer (69)–4
M4 Washer
(70)–2
M6 x 30mm Button
Bolt (64)–4
M8 x 125mm Bolt (62)–2
M8 Curved
Washer (46)–2
M4 x 15mm
Self-tapping
Screw (47)–4
M8 x 65mm Button Bolt (36)–2
ASSEMBLY
o hire an authorized service technician to assemble the exercise bike, call 1-800-445-2480.
T
Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver, an adjustable
wrench, and pliers.
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly.
5
1.
To make assembly easier, read the
nformation on page 5 before you begin.
i
Orient the Front Stabilizer (2) so that the large
oles are facing the Frame (1).
h
Attach the Front Stabilizer (2) to the Frame (1)
with two M10 x 65mm Button Screws (33).
1
33
Large
Holes
2
1
2. Attach the Rear Stabilizer (6) to the Seat Frame
(5) with two M10 x 70mm Carriage Bolts (30)
and two M10 Locknuts (65).
3. Insert the end of the Seat Frame (5) into the
Frame (1).
Firmly press the Frame Bushing (56) into the
Frame (1).
2
65
5
65
3
9
1
66
6
30
Attach the Frame Bushing (56) to the Frame (1)
with two M4 x 5mm Self-tapping Screws (66).
Tighten the Adjustment Knob (9) into the Frame
(1).
Carefully tip the exercise bike onto its side.
Attach the two Bumpers (57) to the Frame (1)
with two M4 x 8mm Screws (29) and two M4
Washers (70).
Tip the exercise bike upright.
56
66
57
70
70
29
5
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.