Wells V236, V201, V202, V101, V102 Installation Manual

WellsSinkware.com

I T ' S A W A T E R T H I N G

Installation Guide

Art Glass Vessels

Wells Sinkware art glass vessels have 8 size-shape combinations (styles) (See Art Glass Vessel Style Chart ). Some vessels (double layered in Style C and D) are intended for both above-counter and partial recess installations, while all the others should be only installed above the counter.

For above-counter installation

Step 1: In the countertop*, drill a hole 1 3/4'' diameter where the vessel bowl will be centered.

Step 2: Place mounting ring under the vessel as shown below if the vessel has a rounded bottom (Style A, C, D and G: Group 1), or directly put the vessel on top of the hole drilled in the countertop if the vessel has a flat bottom (Style B, E, H and I: Group 2).

Horizontal View	Vertical View
Rubber Washer
Mounting Ring

Bottom O-ring

Group 1

Group 2

Mounting Ring Details

Step 3: Use a generous portion of plumbers' putty under the drain cup of the lavatory drain supplied with the vessel and insert the whole body of the drain inside the bowl and through the countertop.

There may be a small beveled rubber washer included with your drain, discard it and use plumbers' putty instead.

Drain Cup

Thick Rubber Washer

Metal Nut

Tailpiece

Drain Assembly Details

Step 4: From under the drain, insert the thick rubber washer, screw on the metal nut and tighten it by hand**. Remove excess plumbers' putty.