C A R D I O P E R F E C T ™ |
Windows Vista® - DO THIS FIRST |
WORKSTATION |
|
IN S TA L L AT I O N GU ID E |
|
|
|
|
|
Installing the CardioPerfect Workstation software on a single PC
This guide shows how to install the software for the Welch Allyn CardioPerfect Workstation on a single laptop or desktop PC. This guide does not cover installation for networked CardioPerfect configurations, or for EMR-connected computers. For a detailed installation procedure, see CardioPerfect Workstation Software Installation Manual, located on the CD under “Browse the manuals” folder.
System Requirements
You need the following minimum recommended configuration to work with the CardioPerfect resting ECG, ambulatory blood pressure, or spirometry software modules.
Computer |
Tower or desktop PC preferred; laptop or |
|
tablet. Some tablet computers may not |
|
support data recording. |
Operating System |
Windows Vista Business Edition |
|
service pack 1 or later |
CPU |
P4 (or equivalent) or higher |
Hard disk |
20 GB with 5 GB free space |
RAM |
512 MB, 1 GB or higher recommended |
Monitor resolution |
1024 x 768 true color, |
|
1280 x 1024 recommended |
Monitor size |
15" or higher |
Ports |
2 USB |
1 Install the CardioPerfect software and USB drivers.
Make sure that you have administrator rights.
Close all running programs.
CardioPerfect CD.
This screen might not appear.
This screen might not appear.
For this installation you can ignore all but this first menu item. If this screen does not appear, explore the CD, and run installer ( ).
(next page)
C A R D I O P E R F E C T ™
WORKSTATION
IN S TA L L AT I O N GU ID E
Accept
The serial number and release code are located on the inside cover of the CD case. The serial number consists of the last 6 digits following the string of zeros.
Wait while the database engine (MSDE) is installed.
It takes a few minutes.
Caution: Do not plug in any USB devices yet.
Do not cancel. You must install this USB
driver even if you did not purchase the spirometry option.
2