Waterpik Technologies WP-65, WP-70, WP-60 User Manual

4 (2)
Waterpik Technologies WP-65, WP-70, WP-60 User Manual

 

Model WP-60/65/70

QUICK START GUIDE

1 Prepare the Reservoir:

2 Select and Insert Tip:

Fill

Remove the reservoir

 

from base and fill with

 

 

lukewarm water.

No

 

 

Gap

 

Replace

Press tip firmly into

 

handle. When tip is

 

Insert

properly inserted there

Replace the

 

should be no gap between

 

control knob and tip. To

reservoir onto the base,

remove tip, simultaneously

PRESSING DOWN FIRMLY

hold control knob down

to ensure full seating.

and lift tip up.

3Prime Unit (First Time Use Only):

Prior to Very First Use of Unit, Prime Unit:

Set pressure control slide switch on handle tohigh, point the handle and tip into sink. Turn unitONuntil water flows from the handle, turn unit OFF.

High

4Adjust Pressure and Pause Control:

For first time users, adjust pressure control to lowest position.

Gradually increase pressure as you prefer.

Low

You can temporarily stop water flow by pressing the pause button on the handle.

PAUSE

continued on back

Loading...
+ 1 hidden pages