™
Dear Parent:
At VTech® we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTech® infant and toddler learning products
encourage your child’s natural growth and discovery skills.
When it comes to providing electronic learning products that
enlighten, entertain and develop minds, at VTech® we see the
potential in every child.
1
INTRODUCTION
Thank you for purchasing the VTECH® Sing ’n Learn™ CD Player
learning toy! We at VTECH® are committed to providing the best possible
products to entertain and educate your child. Should you have any
questions or concerns, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada.
The VTECH® Sing ’n Learn™ CD Player learning toy is a characterized
CD player for toddlers 6 months and up. Four light-up shape keys teach
beginning colors and shapes as well as ‘counting’. Turn his arms to hear
unique sound effects and melodies. Toddlers will enjoy watching the CD
spin and eyes move as they groove to the music.
MOVING EYES
ON/OFF SWITCH
MOVING RIGHT ARM
PIANO BUTTON
SPINNING CD
CARRYING HANDLE
MODE SELECTOR
SWITCH
LIGHT-UP
COLOR/SHAPE
BUTTONS
MOVING LEFT ARM
TRUMPET BUTTON
2
INCLUDED IN THIS PACKAGE
- One Sing ’n Learn™ CD Player learning toy
- One instruction manual
WARNING: All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety .
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit. Use a coin or screwdriver to
loosen the screw.
3. Install 2 “AA” (UM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new, alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten the screw to secure the battery
cover.
BATTER Y NOTICE
• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
3
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
NOTE: If for some reason the program/activity stops working, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
TO BEGIN PLAY
1. T o begin play , slide the ON/OFF SWITCH
to the ON ( ) position.
2. T o adjust the volume, slide the VOLUME
CONTROL SWITCH located on the back
of the unit to the ( ) position for LOW
VOLUME or to the ( ) position for
HIGH VOLUME.
4
3. To turn the unit OFF, slide the ON/OFF
SWITCH to the OFF ( ) position.
Note: To preserve battery life, the Sing ’n
Learn™ CD Player learning toy will
power-down after approximately 30
seconds without input. The unit can be
turned on again by pressing any
button.
ACTIVITIES
A. TALKING MODE
1. Slide the MODE SELECTOR
SWITCH to the TALKING MODE
( ) position. You will hear “Let’s
dance!” followed by a short tune. All
the lights will flash randomly. The CD
will spin and the eyes will move up
and down with short tune.
2. Press the HEART BUTTON to hear
“Red heart” followed by a fun sound
effect. The corresponding light will
flash with the voice, and all the lights
will flash randomly with the sound
effect.
5
3. Press the STAR BUTTON to hear
“Y ellow star” followed by a fun sound
effect. The corresponding light will
flash with the voice, and all the lights
will flash randomly with the sound
effect.
4. Press the CIRCLE BUTTON to hear
“Orange circle” followed by a fun
sound effect. The corresponding light
will flash with the voice, and all the
lights will flash randomly with the
sound effect.
5. Press the TRIANGLE BUTTON to
hear “Green triangle” followed by a
fun sound effect. The corresponding
light will flash with the voice, and all
the lights will flash randomly with the
sound effect.
6
Loading...