VTech CS6129-4, CS6129-3, CS6129-54, CS6128-31, CS6129-32 User Manual

...
0 (0)
Models: CS6128-31/CS6128-42/CS6129-2/
CS6129-3/CS6129-4/CS6129-31/ CS6129-32/CS6129-41/CS6129-52/ CS6129-54
User’s manual
w w w . v t e c h p h o n e s . c o m
on purchasing your new VTech product.
Before using this telephone, please read the
Important safety instructions
on page 54 of this manual.
This manual has all the feature operations and troubleshooting necessary
to install and operate your new VTech telephone. Please review this manual
thoroughly to ensure proper installation and operation of this innovative and
feature rich VTech product. For support, shopping, and everything new at
VTech, visit our website at www.vtechphones.com.
In Canada, please visit www.vtechcanada.com.
The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efficiency guidelines.
i
Table of contents
Getting started . . . . . . . . . . . . . . . . . 1
Parts checklist . . . . . . . . . . . . . . . . . . 1 Telephone base and charger installation . . . . . 2 Battery installation and charging . . . . . . . . . 3 Wall mounting. . . . . . . . . . . . . . . . . . . 4 Handset layout . . . . . . . . . . . . . . . . . . 5 Telephone base layout . . . . . . . . . . . . . . 6
Telephone settings . . . . . . . . . . . . . . . 7
Ringer volume (handset) . . . . . . . . . . . . . 7 Ringer tone . . . . . . . . . . . . . . . . . . . . 8 Key tone . . . . . . . . . . . . . . . . . . . . . 9 Language . . . . . . . . . . . . . . . . . . . . . 9 Clear voicemail . . . . . . . . . . . . . . . . . . 10 Home area code . . . . . . . . . . . . . . . . . 11
Telephone operation . . . . . . . . . . . . . . 12
Make a call . . . . . . . . . . . . . . . . . . . . 12 Answer a call . . . . . . . . . . . . . . . . . . . 12 End a call . . . . . . . . . . . . . . . . . . . . . 12 Speakerphone . . . . . . . . . . . . . . . . . . 12 Volume . . . . . . . . . . . . . . . . . . . . . . 13 Mute . . . . . . . . . . . . . . . . . . . . . . . 13 Ringer mute. . . . . . . . . . . . . . . . . . . . 13
Call waiting . . . . . . . . . . . . . . . . . . . . 14 Find handset . . . . . . . . . . . . . . . . . . . 14 Chain dialing . . . . . . . . . . . . . . . . . . . 15 Intercom . . . . . . . . . . . . . . . . . . . . . 16 Conference call . . . . . . . . . . . . . . . . . . 17 Transfer an external call . . . . . . . . . . . . . 18 Switch between external and intercom call. . . . 20 Answer an incoming call during an intercom call 21 Directory . . . . . . . . . . . . . . . . . . . . . 22 Store a directory entry . . . . . . . . . . . . . . 23 Character chart . . . . . . . . . . . . . . . . . . 24 Search the directory . . . . . . . . . . . . . . . 25 Dial a directory entry . . . . . . . . . . . . . . . 25 Edit a directory entry . . . . . . . . . . . . . . . 26 Delete from the directory . . . . . . . . . . . . . 27 About caller ID . . . . . . . . . . . . . . . . . . 28 Call log . . . . . . . . . . . . . . . . . . . . . . 29 Missed calls indicator . . . . . . . . . . . . . . 30 Review the call log . . . . . . . . . . . . . . . . 30 Make a call log entry ready to dial . . . . . . . . 31 Dial a call log entry . . . . . . . . . . . . . . . . 31 Save a call log entry to the directory . . . . . . . 32
www.vtechphones.com
ii
Table of contents
Delete from the call log . . . . . . . . . . . . . . 33 Call log display screen messages . . . . . . . . 34 Redial list . . . . . . . . . . . . . . . . . . . . . 35 Dial a redial entry . . . . . . . . . . . . . . . . . 35 Delete from redial . . . . . . . . . . . . . . . . . 35
Answering system . . . . . . . . . . . . . . . 36
Answering system and voicemail. . . . . . . . . 36 Message capacity . . . . . . . . . . . . . . . . 37 Activate the answering system . . . . . . . . . . 37 Set the clock . . . . . . . . . . . . . . . . . . . 38 Answering system set up . . . . . . . . . . . . . 39 Set number of rings. . . . . . . . . . . . . . . . 39 Set telephone base ringer . . . . . . . . . . . . 40 Set remote access code . . . . . . . . . . . . . 40 Set message alert tone . . . . . . . . . . . . . . 41 Outgoing announcement . . . . . . . . . . . . . 42 Record your own announcement . . . . . . . . . 42 Play your announcement . . . . . . . . . . . . 43 Delete your announcement. . . . . . . . . . . . 43 New message indication . . . . . . . . . . . . . 44 Message playback . . . . . . . . . . . . . . . . 44 Options during playback . . . . . . . . . . . . . 44 Delete all messages . . . . . . . . . . . . . . . 45
www.vtechphones.com
Record and play memos . . . . . . . . . . . . . 45 Record a memo. . . . . . . . . . . . . . . . . . 45 Memo playback . . . . . . . . . . . . . . . . . . 45 Call screening . . . . . . . . . . . . . . . . . . 46 Call intercept . . . . . . . . . . . . . . . . . . . 46 Message window displays . . . . . . . . . . . . 47 Remote access . . . . . . . . . . . . . . . . . . 48
Appendix. . . . . . . . . . . . . . . . . . . . . 49
Handset display screen messages . . . . . . . . 49 Handset and telephone base indicators . . . . . 51 Battery . . . . . . . . . . . . . . . . . . . . . . 53 Important safety instructions . . . . . . . . . . . 54 Troubleshooting. . . . . . . . . . . . . . . . . . 55 Operating range . . . . . . . . . . . . . . . . . 65 Maintenance . . . . . . . . . . . . . . . . . . . 65 About cordless telephones . . . . . . . . . . . . 66 The RBRC® seal . . . . . . . . . . . . . . . . . 66 Warranty . . . . . . . . . . . . . . . . . . . . . 67 FCC, ACTA and IC regulations . . . . . . . . . . 69 Technical specications . . . . . . . . . . . . . 71 Index . . . . . . . . . . . . . . . . . . . . . . . 72 Template for wall mounting studs. . . . . . . . . 74
iii
Getting started
Parts checklist
Your telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
3. Telephone base
2. Batteries
(2 for CS6129-2,
1. Battery compartment covers (2 for CS6129-2,
3 for CS6128-31, CS6129-3, CS6129-31 and CS6129-32,
4 for CS6128-42, CS6129-4 and CS6129-41, 5 for CS6129-52 and CS6129-54)
3 for CS6128-31, CS6129-3, CS6129-31 and CS6129-32,
4 for CS6128-42, CS6129-4 and CS6129-41, 5 for CS6129-52 and CS6129-54)
6. Charger and charger adapter
(1 for CS6129-2, 2 for CS6128-31, CS6129-3, CS6129-31 and CS6129-32,
3 for CS6128-42, CS6129-4 and CS6129-41,
4 for CS6129-52 and CS6129-54)
power adapter
7. Telephone base
www.vtechphones.com
5. Telephone line cord
4. Handsets
(2 for CS6129-2, 3 for CS6128-31, CS6129-3, CS6129-31 and CS6129-32,
4 for CS6128-42, CS6129-4 and CS6129-41, 5 for CS6129-52 and CS6129-54)
8. Quick start guide
9. User’s manual
To purchase
• replacement batteries or power adapters, visit our website at www. vtechphones. com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada. com or call 1 (800) 267-7377.
Getting started
Basic operation
1
Use only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones. com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada. com or call 1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical
or oor mount
position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the-table/ cabinet outlet.
Getting started
Telephone base and charger installation
Install the telephone base and charger as shown below. Make sure that the electrical outlet is not controlled by a wall switch. If you subscribe to Digital Subscriber Line (DSL) high-speed Internet service through your telephone line, you must install a DSL lter between the telephone base and the telephone wall jack. The lter prevents noise and caller ID problems caused by DSL interference. Please contact
your DSL service provider for more information about DSL lters.
Telephone
wall jack
DSL lter (not included)
required if you have DSL high-speed Internet service
Telephone line cord
Telephone base
Telephone base power adapter
Charger adapter
Electrical outlet not controlled by a wall switch
Charger
2
www.vtechphones.com
Getting started
Battery installation and charging
Install the battery as shown below. After installing the battery, you might be able to make and receive short calls. For best performance, charge the handset for at least 16 hours before use. When the battery power is low, the handset will beep, display LOW BATTERY and will ash on the handset screen. Place the handset in the telephone base or charger to charge the battery when not in use. See the table on page 53 for battery operating times.
If the battery is depleted, it may take approximately four minutes to charge the handset before it can resume screen display. The screen will continue to display
LOW BATTERY until the battery has been charged for approximately one hour.
CHARGE
light
1
If the batter y compartment cover is on the handset, press the indentation and slide the cover to remove.
2
Plug the battery securely into the plug inside the handset battery compartment, matching the color-coded label.
3
Place the battery with the label THIS SIDE UP facing up and the wires inside the battery compartment. Route the wires through the slot at the bottom of the battery compartment.
www.vtechphones.com
4
Align the cover
at against
the battery compartment, then slide it upwards until it clicks into place.
5
Charge the handset by placing it in the telephone base or charger. The CHARGE light will be on when the handset is charging.
If the handset
• will not be used for a long time, disconnect and remove the battery to prevent possible leakage.
To purchase
• replacement batteries, visit our website at www. vtechphones. com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada. com or call 1 (800) 267-7377.
Getting started
Basic operation
3
You can purchase
• mounting hardware from many hardware or home improvement stores.
Getting started
Wall mounting
Your telephone base is ready for desktop use. If wall mounting is desired,If wall mounting is desired, obtain appropriate hardware to be used as mounting studs, and follow the instructions below:
Fasten two mounting studs (not included) on the wall where you want to mount the
1. telephone base. The width between the mounting studs should be 2.56in (65mm). Use the template on page 74 for drilling holes for the wall mounting studs.
Align the holes on the telephone base with the mounting studs on the wall.
2. Slide the telephone base down until it locks securely.
3. Bundle the telephone line cord and power adapter cord neatly with a twist tie.
4.
2.56in (65mm)
4
www.vtechphones.com
Getting started
Handset layout
CHARGE light
• On when the handset is charging in the telephone base or charger.
(Directory)
• Press to enter the directory when the telephone is not in use.
While in the menu, press to scroll up.
• During a call, press to raise the listening volume.
(Speakerphone)
Press to activate the handset speakerphone.
Press again to resume normal handset use.
/FLASH
• Press to make or answer a call.
• During a call, press to receive an incoming call when you receive a call waiting alert.
1
• While reviewing a call log entry, press repeatedly to add or remove a 1 in front of the telephone number before dialing or saving it in the directory.
REDIAL/PAUSE
• Press to review the redial list.
• While dialing or entering numbers into the directory, press and hold to insert a dialing pause.
INT (intercom)
• Press to initiate an intercom conversation or transfer a call.
www.vtechphones.com
CID (caller ID)
• Press to review the call log when the telephone is not in use.
While in the menu, press to scroll down.
• During a call, press to lower the listening volume.
MENU/SELECT
• Press to display the menu.
• While in the menu, press to select an item, or save an entry or setting.
OFF/CLEAR
• During a call, press to hang up.
• While the handset is ringing, press to silence the ringer temporarily.
• Press and hold while the telephone is not in use to erase the missed calls indicator.
• During programming, press to exit without making changes.
#
• Press repeatedly to display other dialing options when reviewing a call log entry.
MUTE/REMOVE
• While on a call, press to mute microphone.
• While reviewing the call log, press to delete an individual entry, or press and hold to delete the entire call log.
• Press to delete digits when predialing (preview numbers before dialing).
5
Getting started
Basic operation
Getting started
Telephone base layout
IN USE light
Flashes when there is an incoming call
• or another telephone sharing the same line is in use.
On when the handset is in use.
VOICEMAIL light
Flashes when you have new voicemail.
Voicemail is offered by your telephone service provider.
SET UP
Press to enter the set up menu
(pages 39-41).
ANNC
Press to enter announcement mode
• (pages 42-43).
CLOCK
Press to set the clock (page 38).
RECORD
Press to record a memo (page 45) or an
• announcement (page 42).
FIND HANDSET
Press to page the system handsets.
6
www.vtechphones.com
Message window
Displays the number of messages plus
• ot he r answe ri ng system infor mati on (page 47).
/REPEAT
Press to repeat a message or press twice
• to play previous message (page 44).
/SKIP
Press to skip to the next message
• (page 44).
/PLAY/STOP
Press to play messages (page 44).
• Press to stop message playback.
X/DELETE
Pr es s t o de let e me ssa ge curr en tly
• playing (page 44).
Whe n the phone is not in use, press
• twice to delete all previously reviewed messages (page 45).
VOL
Pr ess to ad j ust the volu me du rin g
• playback (page 44).
ANS ON/OFF
Press to turn the answering system on or
• off (page 37).
Telephone settings
Ringer volume (handset)
You can change the ringer volume to a comfortable level, or turn the ringer off.
To adjust the ringer volume:
Press MENU/SELECT to display the menu when the
1. handset is not in use.
Press or to select >RINGER VOLUME, then press
2. MENU/SELECT.
Press or to adjust the volume. A sample of each ringer
3. volume will play as you scroll through the choices.
Press MENU/SELECT to conrm your selection. You will
4.
hear a conrmation tone.
www.vtechphones.com
>RINGER VOLUME RINGER TONE
RINGER VOLUME
The ringer will be
• off if the volume is set to zero, and a ringer off icon will be displayed.
The telephone
• base ringer volume is set separately. See page 40 for details.
When setting the
• ringer volume, make sure you do not block the speaker at the back of the handset with your
ngers.
Telephone settings
Basic operation
7
If the ringer
• volume is turned off, then you will not hear ringer tone samples.
Telephone settings
Ringer tone
This menu allows you to choose from different ringer tones. To choose a ringer tone:
Press MENU/SELECT to display the menu when the
1. handset is not in use.
Press or to select >RINGER TONE, then press
2. MENU/SELECT.
Press or to select the desired ringer tone. A sample of
3. each ringer tone will play as you scroll through the choices.
Press MENU/SELECT to conrm your selection. You will
4.
hear a conrmation tone.
>RINGER TONE KEY TONE
RINGER TONE 1
8
www.vtechphones.com
Telephone settings
Key tone
The handset will beep when you press any handset key. You may turn the key tone on or off.
To change the setting:
Press MENU/SELECT to display the menu when the
1. handset is not in use.
Pr ess or to sel ect
2.
>
KEY TONE, th en pre ss
MENU/SELECT.
Press or to choose ON or OFF.
3. Press MENU/SELECT to conrm your selection. You will
4.
hear a conrmation tone.
Language
You can select ENGLISH, FRANÇAIS or ESPAÑOL to be used in all screen displays.
To change the setting:
Press MENU/SELECT to display the menu when the
1. handset is not in use.
Pres s or to select >LANGUAGE, then press
2. MENU/SELECT.
Press or to scroll through the choices.
3. Press MENU/SELECT to conrm your selection. You will
4. hear a conrmation tone.
www.vtechphones.com
>KEY TONE LANGUAGE
KEY TONE ON
>LANGUAGE CLR VOICEMAIL
LANGUAGE ENGLISH
Telephone settings
Basic operation
9
Your telephone
• service provider may alert you to new messages with a stutter (broken) dial tone. Contact your service provider for details.
Telephone settings
Clear voicemail
If you subscribe to voicemail service offered by your telephone service provider, NEW VOICEMAIL and will appear on the handset, and the VOICEMAIL light
on the telephone base will ash when you have new voicemail messages. Please
contact your local telephone company for more information and assistance about using your voicemail service.
After you have listened to all new voicemail messages, the indicators on both the handset and telephone base will turn off automatically.
Use the clear voicemail feature when the telephone indicates that there is new voicemail but there is none (for example, when you have accessed your voicemail while away from home). Clearing the voicemail waiting indicator only turns off the indicators; it does not delete your voicemail message(s). As long as you have new voicemail messages, your local telephone company will continue to send the signal that will turn on the indicators.
To manually turn off these indicators:
Press MENU/SELECT to display the menu when the
1. handset is not in use.
Press or to select >CLR VOICEMAIL, then press
2.
MENU/SELECT. The screen disp lays TURN OFF INDICATOR?
Press MENU/SELECT to conrm your selection. You will
3.
hear a conrmation tone.
>CLR VOICEMAIL HOME AREA CODE
TURN OFF
INDICATOR?
10
www.vtechphones.com
Telephone settings
Home area code
If you dial your local calls using only seven digits (area code not required), you can program your home area code, following the steps below. By programming your home area code, when you receive a call within your local area, the telephone number will automatically be stored without the area code in the call log.
Press MENU/SELECT to display the menu when the
1. handset is not in use.
Press or to select >HOME AREA CODE, then press
2. MENU/SELECT. The stored home area code is displayed
with the last digit ashing.
Use the dialing keys to enter the desired home area code.
3.
Press MUTE/REMOVE to delete a digit.
Press and hold MUTE/REMOVE to delete the entire entry.
• Pres s MENU/SELECT to co nfirm. You will hear a
4.
conrmation tone.
www.vtechphones.com
>HOME AREA CODE DIRECTORY
HOME AREA CODE
800
If, in the future,
• your telephone service provider requires you to dial the area code when making a local call, delete the home area code you have already programmed by pressing MUTE/REMOVE. After the programmed home area code is deleted, _ __ will be displayed.
Telephone settings
Basic operation
11
The screen
• displays the elapsed time as you talk (in hours, minutes and seconds).
When predialing
• (preview numbers before dialing), press
MUTE/REMOVE
or OFF/CLEAR to backspace and delete; press and hold REDIAL/PAUSE to insert a dialing pause (p will be displayed).
Telephone operation
Make a call
Press /FLASH or .
1. Dial the number.
2.
-OR-
Dial the number.
1. Press /FLASH or .
2.
Answer a call
Press /FLASH, or any of the dialing keys (0-9, #, *).
End a call
Press OFF/CLEAR or put the handset in the telephone base or charger.
Speakerphone
During a call, press to switch between speakerphone and normal handset use.
When the battery power is low:
You cannot initiate a call with the speakerphone.
You cannot switch a call from normal handset use to
speakerphone mode.
12
www.vtechphones.com
Telephone operation
Volume
During a call, press VOL or VOL to adjust the listening volume to a comfortable level.
Mute
The mute function allows you to hear the other party while the other party cannot hear you.
During a call, press MUTE/REMOVE on the handset.
1.
MUTED will be temporarily displayed on the screen, along with the smaller
Press MUTE/REMOVE again to resume the conversation.
2.
MICROPHONE ON will be temporarily displayed on the screen.
Ringer mute
You can mute the ringer temporarily when the telephone is ringing.
Press OFF/CLEAR or MUTE/REMOVE to temporarily
• silence the ringer. The next call will ring normally.
MUTE
icon.
PHONE 0:00:00 MUTED
PHONE 0:00:00
RINGER MUTE
MUTE
MUTE
Telephone operation
Basic operation
www.vtechphones.com
13
Telephone operation
Call waiting
If you subscribe to call waiting service from your telephone company, you will hear an alert tone if there is an incoming call while you’re on another call. Press /FLASH to answer the new incoming call. Press /FLASH again to return to
the original call.
Find handset
This feature allows the telephone base to page all the system handsets.
Press FIND HANDSET on the telephone base. All
1. handsets (not in use) will ring and the screens will display
PAGING **.
**
Press /FLASH, or any dialing keys (0-9, #, *) on any
2. one of the system handsets; or press FIND HANDSET on the telephone base to end paging.
** PAGING **
14
www.vtechphones.com
Telephone operation
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the directory, call log or redial list while you are on a call.
Chain dialing can be useful if you wish to access numbers other than phone numbers (such as bank account information or access codes) from the directory, call log or redial list.
To access a number in the directory while you are on a call:
Press MENU/SELECT twice to enter the directory menu.
1. Scroll by pressing or to nd the desired entry.
2. Press MENU/SELECT to dial the desired number when it is displayed.
3.
To access a number in the call log while you are on a call:
Press MENU/SELECT and then press to select >CALL LOG.
1. Press MENU/SELECT to conrm.
2. Scroll by pressing or to nd the desired entry.
3. Press MENU/SELECT to dial the desired number when it is displayed.
4.
To access the last number in the redial list while you are on a call:
Press REDIAL/PAUSE to dial.
Press REDIAL/PAUSE again within two seconds to cancel the chain dialing.
Only the most
• recent phone number stored in the redial memory can be accessed for chain dialing.
Telephone operation
Basic operation
www.vtechphones.com
15
If the destination
• handset does not answer the intercom call within 100 seconds, is in the directory, call log, is on a call, or out of range, the originating handset screen will display
UNABLE TO CALL TRY AGAIN
and return to idle mode.
16
Telephone operation
Intercom
The intercom feature allows conversation between two system handsets.
For model CS6129-2
Press INT on the originating handset when it is not in use
1.
and its screen displays CALLING OTHER HANDSET. The destination handset rings and its screen displays
2.
OTHER HANDSET IS CALLING. To answer the intercom call, press /FLASH, , INT or
3.
any dialing keys (0-9, #, *) on the destination handset. To end an intercom call, press INT, OFF/CLEAR or place
4. the handset back in the telephone base or charger.
For models with three or more handsets
Press INT on the originating handset when the handset is
1. not in use and its screen displays INTERCOM TO:
Use the dialing keys to select the destination handset.
2. Th e originatin g handset screen displays CALLING
3. HANDSET X.
The destination handset rings and its screen displays HANDSET X IS CALLING.
4. To answer the intercom call, press /FLASH, , INT or any dialing keys
5. (0-9, #, *) on the destination handset.
To end an intercom call, press INT, OFF/CLEAR or place the handset back
6. in the telephone base or charger.
www.vtechphones.com
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
INTERCOM TO:
Telephone operation
Conference call
You can conference two system handsets on a call. When one handset is on a call:
Press /FLASH or on another handset to join the call.
-OR-
For model CS6129-2
Press INT to initiate an intercom call. The screen displays CALLING
1.
OTHER HANDSET. The destination handset rings and its screen displays OTHER HANDSET IS
2.
CALLING. Press /FLASH, , INT or any dialing keys (0-9, #, *) on the destination handset to answer the intercom call.
After the destination handset has been answered, press and hold INT on the
3.
originating handset to let the destination handset join the call.
For models with three or more handsets
Press INT to initiate an intercom call. The screen displays TRANSFER TO:
1. Use the dialing keys to select the destination handset. The originating handset
2. screen displays CALLING HANDSET X.
The destination handset rings and its screen displays HANDSET X
3. IS CALLING. Press /FLASH, , INT or any dialing keys (0-9, #, *) on the destination handset to answer the intercom call.
After the destination handset has been answered, press and hold INT on the
4.
originating handset to let the destination handset join the call.
www.vtechphones.com
Telephone operation
Basic operation
17
If the destination
• handset does not pick up the intercom call, the originating handset can return to the external call by pressing
/FLASH,
OFF/CLEAR or INT.
If a call remains
• on hold for about 100 seconds, or if the destination handset is in the director y, call log, or out of range, the screen of the originating handset shows
UNABLE TO CALL TRY AGAIN
and reconnects to the external call automatically.
18
Telephone operation
Transfer an external call
You can transfer an external call from one handset to another system handset.
For model CS6129-2
During a call, press INT to put the call on hold at the originating handset. The
1.
screen displays CALLING OTHER HANDSET. The destination handset rings and its screen displays
2.
OTHER HANDSET IS CALLING. To answer the call at the destination handset, press
3.
/FLASH, , INT or any dialing keys (0-9, #, *) on the
destination handset. Now the party at the originating handset can have a
4. conversation with the party at the destination handset. Both screens display INTERCOM.
Press OFF/CLEAR on the originating handset, or place
5. it back in the telephone base or charger to transfer the external call to the destination handset. The originating handset displays CALL TRANSFERED.
If you wish to cancel call transfer during intercom mode and reconnect to the external call:
Press /FLASH on the originating handset.
-OR-
Press OFF/CLEAR or INT on the destination handset, or place it back in the
telephone base or charger.
www.vtechphones.com
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
INTERCOM
Telephone operation
For models with three or more handsets
During a call, press INT to put the call on hold at the
1.
originating handset. The screen displays TRANSFER TO: Use the dialing keys to enter the destination handset
2. number and the originating handset screen displays CALLING HANDSET X.
The destination handset rings and its screen displays
3. HANDSET X IS CALLING.
To answer the call at the destination handset, press
4.
/FLASH, , INT or any dialing keys (0-9, #, *) on the
destination handset. Now the par ty at the originating handset can have a
5. conversation with the party at the destination handset. Both screens display INTERCOM.
Press OFF/CLEAR on the originating handset, or place
6. it back in the telephone base or charger to transfer the external call to the destination handset. The originating handset displays CALL TRANSFERED.
If you wish to cancel call transfer during intercom mode and reconnect to the external call:
Press /FLASH on the originating handset.
-OR-
Press OFF/CLEAR or INT on the destination handset, or place it back in the
telephone base or charger.
www.vtechphones.com
TRANSFER TO:
CALLING
HANDSET X
HANDSET X
IS CALLING
INTERCOM
Telephone operation
Basic operation
19
Telephone operation
Switch between external and intercom call
If you are on an external call and you wish to intercom another system handset without disconnecting the external call:
For model CS6129-2
During a call, press INT to put the call on hold at the
1.
originating handset. The screen displays CALLING OTHER HANDSET.
The destination handset will ring and its screen will display
2.
OTHER HANDSET IS CALLING. To answer the call at the destination handset, press
3.
/FLASH, , INT or any dialing keys (0-9, #, *) on the
destination handset. Now the party at the originating handset can have a
4. conversation with the party at the destination handset. Both screens display INTERCOM.
Press INT repeatedly on the originating handset to alternate
5. between the external (outside) call and the intercom call.
CALLING
OTHER HANDSET
OTHER HANDSET
IS CALLING
INTERCOM
OUTSIDE CALL
20
www.vtechphones.com
Loading...
+ 55 hidden pages