Vizio SB4451-C0, SB3830-D0, SB3531-D0, SB351-D0 User Manual

0 (0)
Sound bar appearance may vary.
USER MANUAL
SB4451-C0, SB351-D0, SB3531-D0, SB3830-D0
Safety Information
h
IMPORTANT SAFETY INSTRUCTIONS - SMARTCAST
To reduce the risk of electric shock or component damage, switch o the power before connecting other components to your sound bar.
Read these instructions.
eep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including ampliers that produce
heat.
SOUND BAR
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specied by the manufacturer.
nplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
nplug the power cord before cleaning your sound bar.
hen moving your sound bar from an area of low temperature to an area of high temperature, condensation may form in the
housing. ait before turning on your sound bar to avoid causing re, electric shock, or component damage.
A distance of at least three feet should be maintained between your sound bar and any heat source, such as a radiator, heater, oven, amplier etc. Do not install your sound bar close to smoke. Operating your sound bar close to smoke or moisture may cause re or electric shock.
Do not place your sound bar in a bookcase or cabinet unless proper ventilation is provided.
Do not place any objects on the top of your sound bar. Doing so could short circuit parts causing a re or electric shock. Never spill
liquids on your sound bar.
Your sound bar should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
Do not apply pressure or throw objects at your sound bar. This may compromise the integrity of the sound bar. The manufacturer’s warranty does not cover user abuse or improper installations.
The power cord must be replaced when using dierent voltage than the voltage specied. For more information, contact your dealer.
hen connected to a power outlet, power is always owing into your sound bar. To totally disconnect power, unplug the power cord.
Do not overload power strips and extension cords. Overloading can result in re or electric shock.
The wall socket should be installed near your sound bar and easily accessible.
Only power of the marked voltage can be used for your sound bar. Any other voltage than the specied voltage may cause re or
electric shock.
Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.
nplug your sound bar during a lightning storm or when it will not be used for long period of time. This will protect your sound bar
from damage due to power surges.
Do not attempt to repair or service your sound bar yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualied service personnel.
ARNING: eep your sound bar away from moisture. Do not expose your sound bar to rain or moisture. If water penetrates into your sound bar, unplug the power cord and contact your dealer. Continuous use in this case may result in re or electric shock.
Do not use your sound bar if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your sound bar yourself.
Avoid using dropped or damaged appliances. If your sound bar is dropped and the housing is damaged, the internal components may function abnormally. nplug the power cord immediately and contact your dealer for repair. Continued use of your sound bar may cause re or electric shock.
Do not install your sound bar in an area with heavy dust or high humidity. Operating your sound bar in environments with heavy dust or high humidity may cause re or electric shock.
Follow instructions for moving your sound bar. Ensure that the power cord and any other cables are unplugged before moving your sound bar.
hen unplugging your sound bar, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause re or electric shock. hen your sound bar will not be used for an extended period of time, unplug the
power cord.
To reduce risk of electric shock, do not touch the connector with wet hands.
Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote
control or injure the operator. Do not expose batteries to excessive heat such as sunshine, re or the like.
If any of the following occurs, contact the dealer:
The power cord fails or frays.
Liquid sprays or any object drops into your sound bar.
Your sound bar is exposed to rain or other moisture.
Your sound bar is dropped or damaged in any way.
The performance of your sound bar changes substantially.
This apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed on the
apparatus.
The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
CATION - These servicing instructions are for use by qualied service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions unless you are qualied to do so.
The lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROS VOLTAGE within the product’s enclosure that may be of sucient magnitude to constitute a risk of electrical shock to persons.
ii
Table of Contents
First-Time Setup ......................................................4
Pairing a Device with the Sound Bar .............................................. 5
VIZIO SmartCast
Register for a MyVIZIO account ....................................................... 8
App .............................................8
Navigating the SmartCast
ser Prole Settings ......................................................................... 11
Picking something to Listen to ........................................................ 13
Managing Categories ....................................................................... 15
App ....................................................... 9
Device Settings ........................................................16
Setting up additional SmartCast Devices ....................................... 16
Renaming an Input ........................................................................... 19
Renaming Devices on the Input Menu ..................................... 20
Adjusting Audio Settings .................................................................. 21
Using the Audio Menu ............................................................... 22
Adjusting System Settings ............................................................... 23
Viewing System Information ..................................................... 24
Auto Detecting an input ............................................................ 24
Performing a Speaker Test........................................................ 25
Setting a Sleep Timer ................................................................. 25
Pairing a Subwoofer* ................................................................ 26
Resting to Defaults ..................................................................... 26
Adjusting Network Settings ............................................................. 27
Using the Network Connection menu ..................................... 28
Troubleshooting ......................................................31
Specications ...........................................................32
Warranty Information .............................................34
Legal & Regulatory ..................................................36
iii
1First-Time Setup
Welcome to VIZIO SmartCast
Your new VIZIO SmartCast™ Sound Bar is part of the all-new collection of home theater displays, sound bars and home audio speakers that can all be controlled by one ingenious app: the VIZIO SmartCast app.
With the app, you can browse movies, TV shows, music and more from multiple sources or apps in one view, without having to switch back and forth between those apps or sources. And then just tap to cast and listen on your VIZIO Sound Bar- from anywhere in your home. It works over WiFi, so you can control your
!
VIZIO Sound Bar from any room, and keep using your device to continue browsing, play games, text or even watch another show, without disrupting what’s playing on your sound bar. With VIZIO SmartCast, what you love doesn’t change, but how you experience it will never be the same.
Now let’s get you into setup so you can start casting!
4
PAIRING A DEVICE WITH THE SOUND BAR
Need help setting up the sound bar?
Refer to the printed Quick Start Guide (included) for detailed instructions on how to setup your new sound bar. You can also
nd a digital copy on support.vizio.com.
1
1. Turn on the SmartCast Sound Bar by pressing the Power button on the top of the sound bar or by pressing the Power button on the sound bar remote. Launch the SmartCast App on your device. Tap Get Started on your device to begin the First-Time Setup.
hen powered on for the rst time, the sound bar will automatically look for a connected input. All LEDs will ash bottom to top continuously. To
stop this, press INPUT on the bar or continue setup using SmartCast then change the input to Cast.
Sound Bar LEDs Tablet Remote
2. Select your language and tap Next to continue.
3. Hold your device close to the LED on the bottom left corner of the sound bar for a few seconds to pair it.
When successfully paired, a paring tone will be heard from the sound bar.
Sound bar appearance may vary.
5
1
4. Your device begins to search for a wireless network to connect to. Select your wireless network from the list and enter your password. A blue LED
on your sound bar conrms a wireless connection.
5. Use your device to name your sound bar.
6. Take a moment to read the VIZIO Terms of Service and Privacy Policy, as well as Google’s Terms of Service and Privacy Policy. When you are done, tap NEXT to continue.
Sound bar appearance may vary.
6
1
7. Use your device to register your sound bar. If you do not wish to register, tap Skip in the lower left corner.
8. The First-Time setup is complete. The VIZIO SmartCast™ App is displayed.
Sound bar appearance may vary.
7
App
The VIZIO SmartCast™ app lets you swipe or use voice search to find your favorite content, across multiple apps, in one simply aggregated screen, making it easy to discover and enjoy what you love.
REGISTER FOR A MYVIZIO ACCOUNT
1. Launch the VIZIO SmartCast
app.
2VIZIO SmartCast
2. Tap Create an Account to register for a MyVIZIO account. Follow the on-screen instructions to complete the registration process. If you do not want to register for a MyVIZIO account, tap Skip to continue.
To take full advantage of the VIZIO SmartCast™ app, VIZIO recommends you register for a MyVIZIO account.
8
2
NAVIGATING THE SMARTCAST™ APP
After you Creating/Logging into your MyVIZIO account, the home page of the SmartCast™ app is displayed.
Menu
Device Power
Search
Device Settings
Device Input
Volume Controls
Device Menu
The Device Menu is available throughout the SmartCast app, allowing you to easily access the device controls.
Tap to minimize
9
2
Swipe to reveal a list of content categorized into TV Shows, Movies, Music, Live TV, Kids, and Live Streams. You can also access these categorizes by tapping the button in the top left corner.
Please Note: Only content in the Music category can be cast to the sound bars.
OR
10
2
USER PROFILE SETTINGS
Every user can register their very own user prole MyVIZIO, Facebook, or Google.
To access the Prole page:
1. Tap the button to reveal the side menu.
2. Tap ie role.
11
To modify the account settings:
1. Tap the button to access the account settings page. You can change the First Name, Last Name, E-mail Address, and password by tapping on each of them.
2
To edit prole settings:
1. From the Prole page, tap Edit role. You can edit the Prole Color, Prole Name, and Location by taping on each of them.
12
Loading...
+ 26 hidden pages