Vizio S3821W-C0 User Manual

VIZIO

QUICK START GUIDE

Model: S3821w-C0

IMPORTANT SAFETY INSTRUCTIONS

Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire.To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference.

•Read these instructions.

•Keep these instructions.

•Heed all warnings.

•Follow all instructions.

•Do not use this apparatus near water.

•Clean only with a dry cloth.

•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

•Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

•Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

•Unplug this apparatus during lightning storms or when unused for long periods of time.

•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

•To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit.

•Unplug the power cord before cleaning your Unit.A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not use abrasive cleaners.

•Always use the accessories recommended by the manufacturer to insure compatibility.

•When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your Unit to avoid causing fire, electric shock, or component damage.

•Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.

•Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the

top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit.

• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord.

•Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

•The wall socket should be located near your Unit and be easily accessible

•Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit,

unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

•Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your Unit yourself.

•Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock.

•Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may cause fire or electric shock.

•Ensure that the power cord and any other cables are unplugged before moving your Unit.

•When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your Unit will not be used for an extended period of time, unplug the power cord.

•To reduce risk of electric shock, do not touch the connector with wet hands.

•Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote control or injure the operator.

•See the important note and rating located on the back of the unit.

•WARNING - This equipment is not waterproof.To prevent a fire or shock hazard, do not place any container filled

with liquid near the equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.

•CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.

•Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or dispose of it in fire.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Explanation of WARNING symbols:

The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to constitute a risk of shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

PACKAGE CONTENTS

High Definition Sound Bar with	Remote Control	This Quick
wireless Subwoofer	with Batteries	Start Guide

2 x Power	Stereo RCA to 3.5mm	Coaxial Audio	Digital Optical
Cable	Audio Cable	Cable	Cable

2 x Sound Bar Wall	2 x Wall	Wall Mount
Mount Bracket	Mount Screw	Template
	(Size: M4 x 10)

CONTROLS & CONNECTIONS

Back of Sound Bar

DIGITAL (3)

AUX (1)

Coaxial In

Analog Audio In

OPTICAL (4)

Digital Optical Audio In

AUX (2)

Analog Audio In

Power Port

Service Port

Pairing	USB (6)
Button	USB In

Back of Sound Bar

Control Buttons are located here:

Power

Input

Bluetooth Input

(Hold to force pair, See ‘Bluetooth Pairing’ for more information)

	+	Volume
	-

FIRST-TIME SETUP

Back of Sound Bar

1

GOOD

GOOD

BETTER

BETTER

3.5MM TO	3.5MM TO	DIGITAL COAXIAL	DIGITAL OPTICAL
RCA CABLE	RCA CABLE	CABLE**			CABLE**

CHOOSE ONE CABLE:

BETTER

GOOD

AND CONNECT IT TO YOUR TV

*Not all TVs have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.

**When using either of the Digital Inputs, if there is no audio: (A) try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.

1

Connect the Power Cable to

the Sound Bar.

Plug the Power Cable into a power outlet.

2

BACK OF SUBWOOFER

3

AC IN

Connect a Power Cable to the Subwoofer.

4

Plug the Power Cable into a power outlet.

PAIRING
	ON / OFF	5
AC IN			ON / OFF
			Flip the Power Switch into
			the On position.