How it Works
show menu
Vivitek
Loading...
D537W
User Manual
59 pgs2.25 Mb0
User Manual
59 pgs2.11 Mb0
Product Sheet
1 pgs179.76 Kb0
Table of contents
Loading...

Vivitek D537W, D535, D530, D525ST, D520ST User Manual

...
0 (0)
— i —
Copyright
This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be
reproduced without written consent of the author.
© Copyright 2009
Disclaimer
The information in this document is subject to change without notice. The manufacturer makes no repre-
warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of
the manufacturer to notify any person of such revision or changes.
Trademark Recognition
Kensington is a U.S. registered trademark of ACCO Brand Corporation with issued registrations and pend-
ing applications in other countries throughout the world.
All other product names used in this manual are the properties of their respective owners and are ac-
knowledged.
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
— ii —
Important Safety Information
Important:
It is strongly recommended that you read this section carefully before using the projector. These
safety and usage instructions will ensure that you enjoy many years of safe use of the projector.
Keep this manual for future reference.
Symbols Used
Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
The following styles are used in this manual to alert you to important information.
Note:
Provides additional information on the topic at hand.
Important:
Provides additional information that should not be overlooked.
Caution:
Alerts you to situations that may damage the unit.
Warning:
Alerts you to situations that may damage the unit, create a hazardous environment, or cause per-
sonal injury.
Throughout this manual, component parts and items in the OSD menus are denoted in bold font as in this
example:
“Push the Menu button on the remote control to open the Main menu.”
General Safety Information
Do not open the unit case. Aside from the projection lamp, there are no user-serviceable parts in
the unit. For servicing, contact qualified service personnel.
Follow all warnings and cautions in this manual and on the unit case.
The projection lamp is extremely bright by design. To avoid damage to eyes, do not look into the
lens when the lamp is on.
Do not place the unit on an unstable surface, cart, or stand.
Avoid using the system near water, in direct sunlight, or near a heating device.
Do not place heavy objects such as books or bags on the unit.
P
P
P
r
r
r
e
e
e
f
f
f
a
a
a
c
c
c
e
e
e
Projector Installation Notice
Place the projector in a horizontal position
The tilt angle of the projector should not exceed 15 degrees, nor should the projector be installed in
any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.
Allow at least 50 cm clearance around the exhaust vent.
Ensure that the intake vents do not recycle hot air from the exhaust vent.
When operating the projector in an enclosed space, ensure that the surrounding air temperature
within the enclosure does not exceed 5 – 35°C while the projector is running, and the air intake and
exhaust vents are unobstructed.
All enclosures should pass a certified thermal evaluation to ensure that the projector does not
recycle exhaust air, as this may cause the device to shutdown even if the enclosure temperature is
with the acceptable 5 – 35°C range.
– iii –
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
Power Safety
Only use the supplied power cord.
Do not place anything on the power cord. Place the power cord where it will not be in the way of
foot traffic.
Remove the batteries from the remote control when storing or not in use for a prolonged period.
Replacing the Lamp
Replacing the lamp can be hazardous if done incorrectly. See Replacing the Projection Lamp on page 35
for clear and safe instructions for this procedure. Before replacing the lamp:
Unplug the power cord.
Allow the lamp to cool for about one hour.
Cleaning the Projector
Unplug the power cord before cleaning. See Cleaning the Projector page 38.
Allow the lamp to cool for about one hour.
Regulatory Warnings
Before installing and using the projector, read the regulatory notices in the Regulatory Compliance on
page 52.
Important Recycle Instructions:
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that
can be hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal
Laws. For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG
. For lamp
specific disposal information check WWW.LAMPRECYCLE.ORG.
Symbol Explanations
DISPOSAL: Do not use household or municipal waste collection services for
disposal of electrical and electronic equipment. EU countries require the use
of separate recycling collection services.
— iv —
P
P
P
r
r
r
e
e
e
f
f
f
a
a
a
c
c
c
e
e
e
– v –
Main Features
• Lightweight unit, easy to pack away and transport.
• Compatible with all major video standards including NTSC, PAL, and SECAM.
• A high brightness rating allows for presentations in daylight or in lit rooms.
• Supports resolutions up to UXGA at 16.7 million colors to deliver crisp, clear images.
• Flexible setup allows for front, rear projections.
• Line-of-vision projections remain square, with advanced keystone correction for angled
projections.
• Input source automatically detected.
About this manual
This manual is intended for end users and describes how to install and operate the DLP projector. Wher-
ever possible, relevant information—such as an illustration and its description—has been kept on one
page. This printer-friendly format is both for your convenience and to help save paper, thereby protecting
the environment. It is suggested that you only print sections that are relevant to your needs.
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
— vi —
Table of Contents
GETTING STARTED.......................................................................................................................................................... 1
PACKING CHECKLIST........................................................................................................................................................... 1
VIEWS OF PROJECTOR PARTS............................................................................................................................................... 2
D5 Series Front-right View............................................................................................................................................. 2
Top view—On-screen Display (OSD) buttons and LEDs ............................................................................................... 3
Rear view ........................................................................................................................................................................ 4
Bottom view..................................................................................................................................................................... 5
REMOTE CONTROL PARTS ................................................................................................................................................... 6
REMOTE CONTROL OPERATING RANGE............................................................................................................................... 8
PROJECTOR AND REMOTE CONTROL BUTTONS.................................................................................................................... 8
SETUP AND OPERATION.................................................................................................................................................9
INSERTING THE REMOTE CONTROL BATTERIES ................................................................................................................... 9
CONNECTING INPUT DEVICES............................................................................................................................................ 10
STARTING AND SHUTTING DOWN THE PROJECTOR............................................................................................................. 11
SETTING AN ACCESS PASSWORD (SECURITY LOCK).......................................................................................................... 13
ADJUSTING THE PROJECTOR LEVEL................................................................................................................................... 15
ADJUSTING THE ZOOM, FOCUS AND KEYSTONE ................................................................................................................ 16
ADJUSTING THE VOLUME .................................................................................................................................................. 17
ON-SCREEN DISPLAY (OSD) MENU SETTINGS....................................................................................................... 18
OSD MENU CONTROLS ..................................................................................................................................................... 18
Navigating the OSD ...................................................................................................................................................... 18
SETTING THE OSD LANGUAGE..........................................................................................................................................19
OSD MENU OVERVIEW..................................................................................................................................................... 20
OSD SUB-MENU OVERVIEW............................................................................................................................................. 21
IMAGE MENU.....................................................................................................................................................................22
Advanced Feature......................................................................................................................................................... 23
Color Manager..............................................................................................................................................................24
COMPUTER MENU.............................................................................................................................................................. 25 U
VIDEO/AUDIO MENU ......................................................................................................................................................... 26
Audio.............................................................................................................................................................................27
INSTALLATION I MENU......................................................................................................................................................28
Advanced....................................................................................................................................................................... 29
Presentation Timer........................................................................................................................................................ 29
INSTALLATION II MENU .................................................................................................................................................... 30
Advanced Feature......................................................................................................................................................... 31
OSD Menu Setting......................................................................................................................................................... 32
Peripheral Test.............................................................................................................................................................. 32
Lamp Hour Reset .......................................................................................................................................................... 33
Factory Reset................................................................................................................................................................ 33
Status............................................................................................................................................................................. 34
MAINTENANCE AND SECURITY................................................................................................................................. 35
REPLACING THE PROJECTION LAMP................................................................................................................................... 35
Resetting the Lamp........................................................................................................................................................37
CLEANING THE PROJECTOR................................................................................................................................................38
Cleaning the Lens ......................................................................................................................................................... 38
Cleaning the Case......................................................................................................................................................... 38
USING THE KENSINGTON
®
LOCK ....................................................................................................................................... 39
TROUBLESHOOTING..................................................................................................................................................... 40
COMMON PROBLEMS AND SOLUTIONS ............................................................................................................................... 40
TIPS FOR TROUBLESHOOTING............................................................................................................................................ 40
LED ERROR MESSAGES .................................................................................................................................................... 41
IMAGE PROBLEMS.............................................................................................................................................................. 41
LAMP PROBLEMS............................................................................................................................................................... 42
REMOTE CONTROL PROBLEMS .......................................................................................................................................... 42
P
P
P
r
r
r
e
e
e
f
f
f
a
a
a
c
c
c
e
e
e
– vii –
AUDIO PROBLEMS ............................................................................................................................................................. 42
HAVING THE PROJECTOR SERVICED .................................................................................................................................. 42
HDMI Q & A .................................................................................................................................................................... 43
SPECIFICATIONS............................................................................................................................................................. 44
SPECIFICATIONS................................................................................................................................................................. 44
D5 Economic series ...................................................................................................................................................... 44
D5 Advanced SVGA/XGA series................................................................................................................................... 45
D5 Advanced WXGA series........................................................................................................................................... 46
PROJECTION DISTANCE VS. PROJECTION SIZE.................................................................................................................... 47
D5 Series Projection Distance and Size Table.............................................................................................................. 47
D5 SERIES TIMING MODE TABLE....................................................................................................................................... 49
PROJECTOR DIMENSIONS ................................................................................................................................................... 51
REGULATORY COMPLIANCE ..................................................................................................................................... 52
FCC WARNING .................................................................................................................................................................. 52
CANADA ............................................................................................................................................................................ 52
SAFETY CERTIFICATIONS ................................................................................................................................................... 52
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
–
–
–
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 1 –
G
ETTING
S
TARTED

Packing Checklist

Carefully unpack the projector and check that the following items are included:
D5 SERIES DLP PROJECTOR WITH LENS CAP
R
EMOTE CONTROL
(
WITH ONE 3V CR2025
BATTERY
)
RGB
CABLE POWER CORD CARRYING CASE (*)
CD-ROM
(*)
(T
HIS USER’S MANUAL)
Q
UICK START CARD WARRANTY CARD
Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It
is recommend that you keep the original packing material should you ever need to return the equipment
for warranty service.
Caution:
Avoid using the projector in dusty environments.
Note:
(*)Not available in D508 / D509
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 2 –

Views of Projector Parts

D5 Series Front-right View

ITEM LABEL DESCRIPTION SEE PAGE:
1.
IR receiver Receive IR signal from remote control
6
2.
Lens cap Protect lens when not in use
3.
Height-adjuster button Push to release height adjuster
4.
Height adjuster Adjusts level of projector
15
5.
Lens Projection Lens
6.
Focus ring Focuses the projected image
7.
Zoom ring (*) Enlarges the projected image
16
8.
Function keys
See Top view—On-screen Display (OSD) buttons
and LEDs.
3
9.
Height adjuster Adjusts level of projector
15
Important:
Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp
cool. Do not obstruct any of the ventilation openings.
Note:
(*)Not available in D508 / D509 / D520ST
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
–
–
–
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l

Top view—On-screen Display (OSD) buttons and LEDs

ITEM LABEL DESCRIPTION
SEE
PAGE:
On Lamp error
1.
LAMP LED
Off Normal State
2.
(POWER)
Turns the projector On or Off
11
On System over temperature
3.
TEMP LED
Off Normal State
4.
▲ (Up cursor) /
KEYSTONE
Navigates and changes settings in the OSD
Quick Menu – For Keystone
5.
► (Right cursor) / Auto
Navigates and changes settings in the OSD
Optimizes image size, position, and resolution
6.
▼ (Down cursor) /
KEYSTONE
Navigates and changes settings in the OSD
Quick Menu – For Keystone
7.
MENU Open and exits the OSD buttons
8.
◄ (Left cursor) / Source
Navigates and changes settings in the OSD
Detects the input device
18
– 3 –
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 4 –

Rear view

ITEM LABEL DESCRIPTION SEE PAGE:
1. Kensington Lock
Secure to permanent object with a Kensington® Lock
system
39
2. HDMI (*1) Connect the HDMI CABLE from a HDMI device 10
3. AC IN Connect the POWER CABLE 11
4. AUDIO IN (L and R) Connect the AUDIO CABLES from a audio device
5. VIDEO IN Connect the COMPOSITE CABLE from a video device
6. S-VIDEO IN Connect the S-VIDEO CABLE from a video device
7. AUDIO IN Connect an AUDIO CABLE from the input device
8. RS-232C (*2) Connect RS-232 serial port cable for remote control
9. RGB IN Connect the RGB CABLE from a computer and components
10
Note: (*1) Not available in D508 / D509
(*2) Change to USB connector – only available in D508 / D509
Note:
If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the
S-VIDEO connector. S-VIDEO provides a better quality signal.
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
–
–
–
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 5 –

Bottom view

43.20mm
188.20mm
90.70mm
33.20mm
136.20mm
33.20mm
1
2
3
4
5
6
ScrewType:4M
Msl m
Msl m
aximum crew ength m
inimum crew ength m
:8.0
: 6.0
ITEM LABEL DESCRIPTION SEE PAGE:
1.
Lamp cover Remove when changing the lamp.
35
2.
Height adjustor Adjuster drops down when adjuster button is pushed.
3.
Height adjustor button Push to release adjustor.
15
4.
Lens cap hook To fasten the lens cap cover
5.
Tilt adjustor Rotate adjuster lever to adjust angle position.
15
6.
Ceiling support holes Contact your dealer for information on mounting the projector on a ceiling
Note:
When installing, ensure that you use only UL Listed ceiling mounts.
For ceiling installations, use approved mounting hardware and M4 screws with a maximum screw
depth of 6 mm (0.23 inch).
The construction of the ceiling mount must be of a suitable shape and strength. The ceiling mount
load capacity must exceed the weight of the installed equipment, and as an additional precaution
be capable of withstanding three times the weight of the equipment (not less than 5.15 kg) over a
period of 60 seconds.
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l

Remote Control Parts

Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluo-
rescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path be-
tween the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
– 6 –
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
–
–
–
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 7 –
ITEM LABEL DESCRIPTION SEE PAGE:
1.
Up cursor Navigates and changes settings in the OSD
2.
Enter Changes settings in the OSD
18
3.
Power Turns the projector On or Off
11
4.
Right cursor Navigates and changes settings in the OSD
18
5.
Volume + Increase volume
6.
Volume - Decrease volume
17
7.
Mute Mutes the built-in speaker
8.
Freeze Freeze/unfreezes the on-screen picture
9.
Source Detects the input device
10
10.
Auto Auto adjustment for frequency, tracking, size, position (RGB only)
11.
Keystone top Corrects image-trapezoid (wider top) effect
12.
Keystone bottom Corrects image trapezoid (wider bottom) effect
16
13.
Down cursor Navigates and changes settings in the OSD
14.
Left cursor Navigates and changes settings in the OSD
15.
Menu Opens the OSD
18
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 8 –

Remote Control Operating Range

The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides or
the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and
15 degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer.

Projector and Remote Control Buttons

The projector can be operated using the remote control or the buttons on the top of the projector. All
operations can be carried out with the remote control; however, the buttons on the projector are lim-
ited in use.
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
— 9 —
S
ETUP AND
O
PERATION

Inserting the Remote Control Batteries

1.
Remove the battery compartment cover
by sliding the cover in the direction of
the arrow (A). Pull out the cover (B).
2.
Insert the battery with the positive side
facing up.
3.
Replace the cover.
Caution:
1. Only use a 3V lithium battery (CR2025).
2. Dispose of used batteries according to local ordinance regulations.
3. Remove the battery when not using the projector for prolonged periods.
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
—
—
—
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 10 –

Connecting Input Devices

A PC or notebook computer and video device s can be connected to the projector a t the same time . Video
devices include DVD, VCD, and VHS players, a s well as movie camcorders and digital still cameras.
Check the user manual of the connecting device to confir m it has the appropriate output conn ector.
ITEM LABEL DESCRIPTION
HDMI (*1) Connect the HDMI CABLE from a HDMI device
AUDIO IN (L and R) Connect the AUDIO CABLES from a audio device
VIDEO IN Connect the COMPOSITE CABLE from a video device
S-VIDEO Connect the S-VIDEO CABLE from a video device
AUDIO IN Connect an AUDIO CABLE from the input device
RS-232C (*2) Connect the RS-232 serial cable for remote control
RGB IN Connect the RGB CABLE from a computer and components
Note:
(*1) Not available in D508 / D509
(*2) Change to USB connector –only available in D508 / D509
Warning:
As a safety precaution, disconnect all power to the projector and connecting devices before making
connections.
D
D
D
L
L
L
P
P
P
P
P
P
r
r
r
o
o
o
j
j
j
e
e
e
c
c
c
t
t
t
o
o
o
r
r
r
–
–
–
U
U
U
s
s
s
e
e
e
r
r
r
’
’
’
s
s
s
M
M
M
a
a
a
n
n
n
u
u
u
a
a
a
l
l
l
– 11 –

Starting and Shutting down the Projector

1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The
POWER LED on the projector
light.
2.
Turn on the connected devices.
3.
Ensure the LAMP LED not a flashing
orange. Then press the
POWER
button to turn on the projector.
The projector splash screen displays and
connected devices are detected.
See Setting an Access Password
(Security Lock) on page 13 if security
lock is enabled.
4.
If more than one input device is con-
nected, press the SOURCE button and
use ▲▼ to scroll among devices.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
• VGA: Analog RGB
Component: DVD input YCbCr / YPbPr, or HDTV
input YPbPr via HD15 connector
• Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)
•
HDMI: HDMI, DVI (Not available in D508 / D509)
Loading...
+ 41 hidden pages
Privacy Policy Cookie Policy Terms of Use