A s s e m b l y G u i d e
X6100, X6200 AND X6200HRT
FOLDING ELLIPTICAL TRAINERS
A s s e m b l y
G u i d e
X6100, X6200, AND X6200HRT
FOLDING ELLIPTICAL TRAINERS
damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find Trainer’s serial number located on the front axle tube, and enter here:
number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be your Owner’s Guide before using your new Elliptical Trainer.
hardware or tools are missing, please call 1.800.335.4348, Extension 12.
that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent loos-
. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely ONE screw.
STEP 3
STEP 5
STEP 2
TOOLS & PARTS INCLUDED
Screwdriver
5mm T-Shaped Wrench
13mm Wrench
6mm L-Shaped Wrench
PARTS BOX
Console Mast Boot
Dual-Action Link Arm Covers
Dual-Action Axle Covers 5mm L-Shaped Wrench
Rear Stabilizers
Pedal Arm Bracket Covers
Pedal Support Bracket
Water Bottle & Cage
Power Supply
Heart Rate Chest Strap (X 6 2 0 0 H RT Only)
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
Loading...