A s s e m b l y G u i d e
R2200 AND R2200HRT
SEMI-RECUMBENT FITNESS CYCLE
A s s e m b l y
G u i d e
R2200 AND R2200HRT
SEMI-RECUMBENT FITNESS CYCLE
To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding, find your new Fitness Cycle’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Fitness Cycle.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Fitness Cycle to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely tightening any ONE screw.
STEP 3
STEP 2
STEP 4
ST
TOOLS & PARTS INCLUDED
15mm Pedal Wrench
5mm Allen Wrench
6mm L-Shaped Wrench 4mm L-Shaped Wrench
Screwdriver
5mm L-Shaped Wrench
PARTS BOX
Console Mast Cover, Qty: 1
Pedals, Qty: 2
Power Supply, Qty: 1
Water Bottle & Cage, Qty: 1
Heart Rate Chest Strap (R2200HRT Only)
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
Loading...