V I S I O N 
F I T N E S S
O w n e r ’ s G u i d e
E 3 6 0 0 H R C , R 2 6 0 0 H R C ,
T 8 6 0 0 S / H R C & X 6 6 0 0 H R C / D A
E 3 6 0 0 H R C
R 2 6 0 0 H R C
. . . . . . . . 4
. . . . . . . . 6
. . . . . . . 7,8
. . . . . . . . 8 START™ . . . 9
. . . . . . . 10
. . . . . . . 11
. . . . . . . 12
. . . 13
. . . 14
. . . . . . 15
. . . . . . . 16 STRAP . . . 17
. . . . . . . 18
. . . . . . . 20
. . 22
T 8 6 0 0 S & H R C
SAFETY INSTRUCTIONS . . . . . . . . 26 MOVING & LEVELING . . . . . . . . . 30 POWER, EMERGENCY STOP . . . . . 31 ONE-BUTTON START - T8600S . . . 32 FEEDBACK DISPLAY - T8600S . . . 33 ONE-BUTTON START - T8600HRC . 34 PROGRAM DETAILS - T8600HRC . . 35 FEEDBACK DISPLAY - T8600HRC . . 36 PROGRAMMING - T8600HRC . . . . 38 HRC PROGRAM - T8600HRC . . . . 39
Table of Contents
ABOUT HRC - T8600HRC . . . . . . . 40
TARGET HR ZONE - T8600HRC . . . 41
TROUBLESHOOTING . . . . . . . . . . 42
TROUBLESHOOTING HR STRAP . . . 43
COMMON QUESTIONS . . . . . . . . 44
TENSIONING THE BELT . . . . . . . . 45
HOME USE WARRANTY . . . . . . . . 46
LIGHT COMMERCIAL WARRANTY . . 48
X 6 6 0 0 H R C & D A
. . . . . 52
. . . . . 54
. . . . . 55
. . . . . 56
. . 57
. . . . . 58
. . . . . 59
. . . . . 60
. . . . . 61
. . . . . 62
. . . . . 63
. 64
. . . . . 66
. . . 67
. . . . . 68
. . . . . 70
. . 72
. . . . . 74
. . . . . 75
. . . . . 76
. . . . . 80
. . . . . 82
CONTACT
HEART RATE
BARS
SEAT
ADJUSTMENT
REAR FOOT
ASSEMBLY
POWER
SWITCH EASY-8™ CONSOLE
CONSOLE
MAST
SEAT
ADJUSTMENT
FRONT FEET &
TRANSPORT WHEELS
EASY-8™
CONSOLE
CONSOLE
MAST
FRONT FEET &
TRANSPORT WHEELS
CONTACT
HEART RATE
BARS
POWER
SWITCH
REAR FOOT |
3 |
ASSEMBLY |
|
|
E 3 6 0 0 H R C |
upright & semi-recumbent R 2 6 0 0 H R C
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
When using an electrical product, basic precautions should always be followed, including the following:
Read all instructions before using this exercise product.
Your VISION FITNESS Bike is self-generating (requiring no external power source) and in this mode must be pedaled to power-up the console. Alternatively, the Bike can instead be plugged into an outlet using the included power supply.
WARNING! To reduce the risk of burns, fire, electrical shock or injury to persons:
•Use this exercise product for its intended use as described in this Owner’s Guide. Do not use attachments not recommended by the manufacturer.
•Never drop or insert any object into any opening.
•Do not remove the Bike sidecovers. Service should be performed only by an authorized VISION FITNESS retailer.
•Never operate this Bike if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or immersed in water. Return the Bike to a retailer for examination and repair.
•Keep the cord away from heated surfaces.
•Do not use outdoors.
•To disconnect, turn the switch to the OFF position, then remove plug from outlet.
•Only use the power cord provided with your VISION FITNESS Bike.
•Never place the power cord under carpeting or place any object on top of the power cord, which may pinch and damage it.
•Unplug your VISION FITNESS Bike before moving it.
CHILDREN
•Keep children off your VISION FITNESS Bike at all times.
4• When the VISION FITNESS Bike is in use, young children and pets should be kept at least 10 feet away.
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
OTHER SAFETY TIPS FOR YOUR VISION FITNESS BIKE
CAUTION! If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.
• Do not wear clothing that might catch on any part of the Bike.
•Read this Owner’s Guide before operating this Bike.
CLEANING
•Clean with soap and slightly damp cloth only; never use solvents.
5
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
MOVING
Your VISION FITNESS Bike has a pair of transport wheels built into the front legs. To move the E3600, firmly grasp the handlebars, carefully tip toward you and roll on the transport wheels. To move the R2600, firmly grasp the rear foot assembly, carefully lift and roll on the transport wheels.
CAUTION: Our Bikes are well-built and heavy, weighing up to 140 lbs.! Use care and additional help if necessary.
LEVELING
The Bike should be level for optimum use. If your Bike wobbles when you have placed it where you intend to use it, raise or lower one or both of the adjustable levelers located on the bottom of the rear foot support. Once you have leveled the Bike, lock the levelers in place by tightening the wing nuts against the rear foot support.
6
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
SEAT ADJUSTMENTS
SEAT POSITIONING
The seat is at the proper position when your knee is slightly bent when the pedal is in the furthest position, with the ball of your foot centered on the pedal.
E3600HRC SEAT ADJUSTMENT
Grasp the Seat Adjustment Knob, located at the base of the seatpost. Pull the Knob out, then raise or lower the seatpost to the desired height. Release the Knob and allow the seatpost to lock into position.
7
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
R2600HRC SEAT ADJUSTMENT
SEAT POSITION
While seated on the Bike, lift the Seat Lever and slide the seat forward or back. When the seat is positioned properly, simply release the Seat Lever to lock the seat into position.
EASY-8™ CONSOLE
Your EASY-8™ Console arrives preset to display Miles. If you wish to display Kilometers instead, remove the Console from the Console Mast by removing the four mounting bolts. Inside the mounting recess you will find a small switch; move this MPH/KM Conversion Switch to the right to display Kilometers. Remount the Console to the Console Mast.
MILES / KILOMETERS
CONVERSION SWITCH
8
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
GETTING STARTED
POWER
Your Bike is self-generating (requiring no external power source) and in this mode must be pedaled to power-up the Console. Alternatively, the Bike can also be plugged into an outlet using the included power supply. If using the Bike in this mode, ensure that it is properly connected to the power outlet, then turn on the Power switch, located near the power supply.
ONE-BUTTON START™
Simply press the Start button to begin exercising in the manual Program.
9
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
PROGRAM DETAILS
Customized workouts; with
|
no default Time. |
|
|
|
|
Improves |
your |
strength, |
|
|
speed, and endurance by raising and lowering |
|||
|
the resistance Level throughout your workout to |
|||
|
involve both your heart and muscles; Time |
|||
|
defaults to 24 minutes. |
|
|
|
|
Maintains |
weight |
by |
|
|
gradually raising and lowering the resistance |
|||
|
Level to gradually raise and lower your Heart |
|||
|
Rate; Time defaults to 32 minutes. |
|
|
|
|
Promotes |
weight |
loss |
by |
|
raising and lowering the resistance Level, but still |
|||
|
keeps you in your fat-burning zone; Time |
|||
|
defaults to 48 minutes. |
|
|
|
|
Improves performance by |
|||
|
raising resistance Level to a high peak then |
|||
|
lowering again; Time defaults to 48 minutes. |
|
||
|
Saves time by making the |
|||
|
most of your limited workout time; motivates and |
|||
|
encourages you to achieve your fitness goals. |
|||
|
Benefits weight loss by maintaining an optimum |
|||
|
exercise level to burn fat; Time defaults to 24 |
|||
|
minutes. |
|
|
|
10 |
NOTE: In addition to the specific benefits listed, all the Programs can provide |
|||
|
an aerobic and cardiovascular benefit. |
|
|
|
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
FEEDBACK DISPLAY
SPEED
Shown as Miles per Hour or Kilometers per Hour. View the current cycling Speed.
DISTANCE
Shown as Miles or Kilometers. View Distance during workout.
CALORIES
Shown as total accumulated Calories burned during workout.
RPM
Shown as Revolutions per Minute. Improve cycling technique while reducing leg muscle fatigue by pedaling between 80 & 100 RPMs.
PROGRAM LEVEL
View the current chosen Program Level. Indicates the difficulty of your workout, with L1 being the easiest and L16 being the most difficult.
TIME
Shown as Minutes:Seconds. View the Time remaining or the Time elapsed in your workout.
WATTS
A measurement of your expended energy. May be used to evaluate and quantify your fitness progress over time.
HEART RATE
Shown as Beats per Minute. You can monitor your Heart Rate at any time during a workout.
FINISHING
When your work-out is complete the Display windows will begin
flashing your workout information, allowing you to record it in your |
|
personal logbook. If you are using the Bike with the external power |
|
supply, the workout information will flash for 5 minutes. |
|
NOTE: If you are instead using the Bike in the self-generating mode, your |
11 |
workout information will flash only as long as you continue pedaling. |
|
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
CHOOSING A PROGRAM
If you do not choose a Program, the EASY-8™ Console will default to the MANUAL Program. If you wish to choose another Program, simply press one of the other Program buttons.
CHOOSING A LEVEL
After you have chosen a Program, the Level will default to L6 and then flash. You may use this default Level or choose another by using the Arrow buttons; L1 provides the least resistance, L16 the most.
CHOOSING A TIME
After you have chosen a Level, the Time will default, depending on which Program you have chosen, and then flash. You may use this default Time or choose another by using the Arrow buttons.
STARTING
When you are ready to begin exercising press START.
12
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
USING YOUR BIKE’S HRC PROGRAM
Use the chart on Page 16 to determine your Target Heart Rate, then follow the instructions on Page 15 to place the wireless transmitter on your chest.
Choose the Heart Rate Program by pressing the ♥ HR CONTROL button.
Using the Arrow buttons under ‘CHOOSE LEVEL’ select your Target Heart Rate, visible in the LEVEL window.
Using the Arrow buttons under ‘CHOOSE TIME’ select your Time, or you may use the default time of 24 Minutes.
When you are ready to begin exercising press START.
The Bike will take you through a 5 minute warm-up period and then it will begin to raise the resistance until your Heart Rate is within +/-5 Beats per Minute of the Target Heart Rate you entered. Then
when you have 5 minutes left in your program the Bike will begin 13 your cool-down period and lower the resistance.
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
ABOUT HEART RATE CONTROL
Your VISION FITNESS Bike offers two options for Heart Rate Control and Feedback; you may choose to use the convenient Hand Contact Bars or the hands-free Wireless Chest Transmitter
(recommended for the Heart Rate Control Program).
CONTACT BAR HAND POSITION
Place the palm of your hands directly on the Contact Pads. Both hands must grip the bars for your Heart Rate to register.
WIRELESS CHEST TRANSMITTER
Prior to wearing the Strap on your chest, moisten the two rubber contact strips with several drops of water and spread about with your fingers.
14
E 3 6 0 0 H R C
TRANSMITTER STRAP PLACEMENT
Center the Transmitter Strap just below the breast or pectoral muscles, directly over your sternum with the VISION FITNESS logo facing out.
R 2 6 0 0 H R C upright & semi-recumbent
TARGET HEART RATE ZONE
Your Target Heart Rate Zone is a percentage of your maximum heart rate. Target Zone will vary for each individual, depending on age, current level of conditioning, and personal fitness goals. The American Heart Association recommends working-out at a Target Heart Rate Zone of between 60% and 75% of your maximum heart rate. See the chart below for convenient reference.
EXAMPLE for 42-year old user: find AGE along bottom of chart (round to 40), follow AGE column up to TARGET ZONE bar. RESULTS: 60% of maximum Heart Rate = 108 Beats per Minute, 75% of maximum Heart Rate = 135 Beats per Minute. With this Target Zone of 108-135 Beats per Minute it is best to enter an average Target Heart Rate of about 122 Beats per Minute into the Console.
100% |
|
|
|
|
|
|
|
|
|
|
75% |
150 |
146 |
|
|
|
|
|
|
|
|
|
143 |
139 |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
||
60% |
|
|
|
135 |
|
|
|
|
|
|
|
|
|
|
131 |
|
|
|
|
||
|
|
|
|
|
128 |
|
|
|
||
|
|
|
|
|
|
124 |
|
|
||
t e |
120 |
|
|
|
|
|
120 |
|
||
117 |
|
|
|
|
|
116 |
||||
n u |
|
114 |
|
|
|
|
|
|
||
|
|
111 |
|
|
|
|
|
|
||
m i |
|
|
|
108 |
|
|
|
|
75% |
|
|
|
|
|
105 |
102 |
|
|
|||
e r |
|
|
|
|
|
99 |
|
|
||
|
|
|
|
|
|
96 |
60% |
|||
|
|
|
|
|
|
|
||||
p |
|
|
|
|
|
|
|
|
93 |
|
b e a t s |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
a g e |
20 |
25 |
30 |
35 |
40 |
45 |
50 |
55 |
60 |
65 |
BENEFITS
•Weight Loss -- Helps you maintain an optimum exercise level to burn fat.
•Efficient -- Quantifies your exercise level for maximum benefit.
•Time Saver -- Makes the most of your limited workout time.
• Motivation -- Provides encouragement to achieve your fitness |
15 |
goals and reach for new heights.
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
|
TROUBLESHOOTING YOUR FITNESS BIKE |
|
Our Bikes are designed to be reliable and easy to use. If, however, |
|
you have a problem, these troubleshooting steps may indicate the |
|
cause. |
|
PROBLEM: The Console does not light up. |
|
SOLUTION: 1) Check to make sure the Bike is turned on (switch is |
|
located near power supply). |
|
2) If you are using the Bike without a power supply, be sure you are |
|
pedaling fast enough to power the Console. If the problem persists, |
|
plug in the power supply, turn the Bike on and test to see if the |
|
Console powers up. |
|
PROBLEM: The Bike is making a |
|
clicking noise. |
|
SOLUTION: Using the supplied |
|
15MM wrench, remove both the |
|
right and left pedals, apply |
|
grease to the threaded portion of |
|
the pedals and reassemble the |
|
unit, making sure the pedals are |
|
as tight as possible. |
|
PROBLEM: The Bike appears to work but there is no resistance |
|
change. |
|
SOLUTION: The magnetic brake assembly is not working |
|
properly; please contact your retailer. |
|
PROBLEM: The Bike makes a squeaking or creaking noise. |
|
SOLUTION: Check and tighten all the bolts on the Bike again. |
16 |
NOTE: If the above steps do not remedy the problem, discontinue |
use, turn the power off and contact your retailer. |
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
TROUBLESHOOTING YOUR HEART RATE MONITOR CHEST STRAP
PROBLEM: No pulse reading appears
SOLUTION: There may be a poor connection between the contact pads and skin. Remoisten the electrodes.
SOLUTION: Transmitter is not properly positioned. Reposition the chest strap.
SOLUTION: Verify that the distance between transmitter and receiver is not beyond the recommended range of 36 inches.
PROBLEM: There is an erratic pulse rate.
SOLUTION: Chest strap is too loose; readjust according to directions.
NOTE: It is possible that heart rate monitors will not function properly on some people due to a variety of reasons. It may be necessary to experiment with the fit and position of the chest strap. Outside interference sources such as computers, motors, etc. are also a major source of problems for heart rate monitors.
17
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
COMMON BIKE QUESTIONS
Q: Are the sounds my Bike makes normal?
A: Our Bikes are some of the quietest available because they use belt drives and magnetic resistance. We use the highest grade European bearings and top quality belts to minimize noise. However, because the resistance system itself is so quiet, you will occasionally hear some slight mechanical noises from the drive train. Unlike older, louder technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our Bikes. These mechanical noises, which may or may not be intermittent, are normal and are caused by the transfer of significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts will generate some noise which will transmit through the casing and frame. It is also normal for these sounds to change slightly during a workout, and over time, because of thermal expansion of the parts. Keep in mind that while you work out you’re sometimes exerting the equivalent mechanical energy of a washing machine or dryer!
Q: Why is the Bike I had delivered louder than the one at the store? A: All fitness products seem quieter in a large store showroom because there is generally more background noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. And finally, if a fitness product is placed close to a wall, there will be more reflected noise.
|
Q: When should I be worried about a noise? |
|
A: As long as the sounds your Bike makes are no louder than a |
|
normal conversational tone of voice, it is considered normal noise. |
|
If your Bike is louder than this, you may want to call your service |
18 |
technician. Sometimes an initial diagnosis can be made over the |
phone. |
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
Q: What kind of routine maintenance is required?
A: We use sealed bearings throughout our Bikes so lubrication is not needed. The most important maintenance step is to simply wipe your perspiration off the Bike after each use.
Q: Will the magnets wear out over time?
A: No, we use permanent magnets that will retain their braking force indefinitely in this application. One of the big advantages of a
magnetic brake is its long life since there is no physical contact between the flywheel and the magnet surface.
Q: How long will the drive belt last?
A: The computer modeling we had done indicated virtually thousands of maintenance-free hours. These belts are now used in far more demanding applications such as motorcycle drives.
19
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
LIMITED HOME USE WARRANTY
VISION FITNESS extends the following exclusive, limited warranty, which shall apply only to the use of the device in the home, for residential, non-commercial purposes only. Any other use of the device shall void this warranty.
VISION FITNESS hereby extends the following limited warranties for the following components of the device, for the time period indicated:
FRAME - LIFETIME VISION FITNESS warrants the Frame against defects in workmanship and materials for the life of the product, so long as it remains in the possession of the original owner.
ECB-PLUS™ BRAKE - LIFETIME VISION FITNESS warrants the ECB-PLUS™ Magnetic Brake against defects in workmanship and materials for the life of the product, so long as it remains in the possession of the original owner. Only the Brake and Magnet assembly, and no other ancillary components or parts, are covered by this lifetime warranty
ELECTRONICS & PARTS - THREE YEARS VISION FITNESS warrants the Electronic components and all original Parts (other than the ECB-PLUS™ Magnetic Brake) against defects in workmanship and materials for a period of three years from the date of original purchase, so long as the device remains in the possession of the original owner.
LABOR - TWO YEARS VISION FITNESS shall cover the Labor cost for the repair of the device for a period of two years from the date of original purchase, so long as the device remains in the possession of the original owner.
20
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
LIMITED HOME USE WARRANTY (continued)
EXCLUSIVE REMEDY
The exclusive remedy for any of the above warranties shall be repair or replacement of defective Parts, or the supply of Labor to cure any defect, provided that Labor shall be limited to two years. All Labor shall be supplied by the local Retailer and the product must be located within that Retailer’s service area. Products located outside the Retailer’s service area will not be covered by the Labor warranty.
EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the repair or replacement of a defective Frame, ECB-PLUS™ Magnetic Brake, Electronic component, or defective Part and is the sole remedy of the warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the Fitness Product as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion, discoloration of paint or plastic, or neglect. VISION FITNESS shall not be responsible for incidental or consequential damages. Parts and Electronic components reconditioned to As New Condition by VISION FITNESS or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty terms. Any warranty replacement parts shall be warranted for the remainder of the original warranty term.
VISION FITNESS expressly disclaims all other warranties, express or implied, including but not limited to all warranties of fitness for a particular purpose or of merchantability. This warranty gives you specific legal rights and your rights may vary from state to state.
WARRANTY REGISTRATION
Your warranty card must be completed and sent to VISION FITNESS before a warranty claim can be processed. You may also register via our website at www.visionfitness.com. Inside the enclosed warranty card you will find a customer survey. Your care in completing the survey will be of value to us in serving you in the future. Comments and suggestions are always welcome.
We are certain you will enjoy your new Fitness Bike. Thank you for 21 selecting a VISION FITNESS product.
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
LIMITED LIGHT COMMERCIAL WARRANTY
Up to 5 hours use per day
LIGHT COMMERCIAL USES DEFINED VISION FITNESS warrants models E3600HRC & R2600HRC for use in light commercial facilities including: Hotels, Resorts, Police & Fire Stations, Apartment Complexes, Corporate Fitness Centers, Hospitals, Rehabilitation and Sports Medicine Clinics, where average use is up to five hours per day. Not warranted for private Health Clubs, YMCA’s or Schools.
FRAME, ECB-PLUS™ BRAKE, ELECTRONICS & PARTS - TWO YEARS
VISION FITNESS warrants the Frame, ECB-PLUS™ Magnetic Brake, Electronic components and all original Parts against defects in workmanship and materials for a period of two years from the date of original purchase, so long as the device remains in the possession of the original owner.
LABOR - TWO YEARS VISION FITNESS shall cover the Labor cost for the repair of the device for a period of two years from the date of original purchase, so long as the device remains in the possession of the original owner.
EXCLUSIVE REMEDY
The exclusive remedy for any of the above warranties shall be repair or replacement of defective Parts, or the supply of Labor to cure any defect, provided that Labor shall be limited to two years. All Labor shall be supplied by the local Retailer and the product must be located within that Retailer’s service area. Products located outside the Retailer’s service area will not be covered by the Labor warranty.
22
E 3 6 0 0 H R C
R 2 6 0 0 H R C upright & semi-recumbent
LIMITED LIGHT COMMERCIAL WARRANTY (continued)
Up to 5 hours use per day
EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the repair or replacement of a defective Frame, ECB-PLUS™ Magnetic Brake, Electronic component, or defective Part and is the sole remedy of the warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the Fitness Product as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion, discoloration of paint or plastic, or neglect. VISION FITNESS shall not be responsible for incidental or consequential damages. Parts and Electronic components reconditioned to As New Condition by VISION FITNESS or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty terms. Any warranty replacement parts shall be warranted for the remainder of the original warranty term.
VISION FITNESS expressly disclaims all other warranties, express or implied, including but not limited to all warranties of fitness for a particular purpose or of merchantability. This warranty gives you specific legal rights and your rights may vary from state to state.
WARRANTY REGISTRATION
Your warranty card must be completed and sent to VISION FITNESS before a warranty claim can be processed. You may also register via our website at www.visionfitness.com. Inside the enclosed warranty card you will find a customer survey. Your care in completing the survey will be of value to us in serving you in the future. Comments and suggestions are always welcome. We are certain you will enjoy your new Fitness Bike. Thank you for selecting a VISION FITNESS product.
23
E 3 6 0 0 H R C
upright & semi-recumbent R 2 6 0 0 H R C
Loading...