A s s e m b l y G u i d e
X6600HRT
COMMERCIAL ELLIPTICAL TRAINER
A s s e m b l y
G u i d e
X6600HRT
COMMERCIAL ELLIPTICAL TRAINER
To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be sure to read your Owner’s Guide before using your new Elliptical Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE: It is recommended that you apply grease to the threads of each screw as you assemble your Elliptical Trainer to prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before completely tightening any ONE screw.
STEP 4
STEP 2
ST
TOOLS & PARTS INCLUDED
5mm |
6mm T-Handled Wrench |
Screwdriver
8mm L-Shaped Wrench
10mm L-Shaped Wrench
17mm Socket Wrench
PARTS BOX
Console Mast Cover
Water Bottle
Heart Rate Chest Strap
Link Arm Covers, Qty: 2
Pedal Support Brackets, Qty: 2
Dual Action End Caps, Qty: 2
Color-coded Hardware Bags
Owner’s Guide
Assembly Guide
Warranty Card
Loading...