TCDT1120(G) Series
Vishay Telefunken
Optocoupler with Phototransistor Output
Description
The TCDT1120(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package.
The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements.
Applications
Circuits for safe protective separation against
14827
electrical shock according to safety class II (reinforced isolation):
DFor appl. class I ± IV at mains voltage ≤ 300 V
DFor appl. class I ± III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for:
Switch-mode power supplies, line receiver, computer peripheral interface, microprocessor system interface.
VDE Standards
These couplers perform safety functions according to the following equipment standards:
DVDE 0884
Optocoupler for electrical safety requirements
DIEC 950/EN 60950
Office machines (applied for reinforced isolation for mains voltage ≤ 400 VRMS)
DVDE 0804
Telecommunication apparatus and data processing
DIEC 65
Safety for mains-operated electronic and related household apparatus
Order Instruction
|
nc |
|
C |
|
E |
|
|
|
|
|
|
|
|
|
6 |
|
5 |
|
4 |
|
|
|
|
|
|
|
|
94 9222
1 |
|
2 |
|
3 |
|
|
|
|
|
|
|
A (+) |
C (±) |
nc |
Ordering Code |
CTR Ranking |
Remarks |
TCDT1120/ TCDT1120G1) |
>40% |
|
TCDT1122/ TCDT1122G1) |
63 to 125% |
|
TCDT1123/ TCDT1123G1) |
100 to 200% |
|
TCDT1124/ TCDT1124G1) |
160 to 320% |
|
1) G = Leadform 10.16 mm; G is not market on the body
224 |
Rev. A3, 11±Jan±99 |
TCDT1120(G) Series
Vishay Telefunken
Features
Approvals:
DBSI: BS EN 41003, BS EN 60095 (BS 415), BS EN 60950 (BS 7002),
Certificate number 7081 and 7402
DFIMKO (SETI): EN 60950, Certificate number 12399
DUnderwriters Laboratory (UL) 1577 recognized, file number E-76222
DVDE 0884, Certificate number 94778
VDE 0884 related features:
DRated impulse voltage (transient overvoltage) VIOTM = 6 kV peak
DIsolation test voltage (partial discharge test voltage) Vpd = 1.6 kV
DRated isolation voltage (RMS includes DC) VIOWM = 600 VRMS (848 V peak)
DRated recurring peak voltage (repetitive) VIORM = 600 VRMS
DCreepage current resistance according to VDE 0303/IEC 112
Comparative Tracking Index: CTI = 275
DThickness through insulation ≥ 0.75 mm
General features:
DIsolation materials according to UL94-VO
DPollution degree 2 (DIN/VDE 0110 resp. IEC 664)
DClimatic classification 55/100/21 (IEC 68 part 1)
DSpecial construction:
Therefore, extra low coupling capacity of typical 0.3 pF, high Common Mode Rejection
DLow temperature coefficient of CTR
DBase not connected
DCTR offered in 4 groups
DCoupling System A
Absolute Maximum Ratings
Input (Emitter)
Parameter |
Test Conditions |
Symbol |
Value |
Unit |
Reverse voltage |
|
VR |
5 |
V |
Forward current |
|
IF |
60 |
mA |
Forward surge current |
tp ≤ 10 ms |
IFSM |
3 |
A |
Power dissipation |
Tamb ≤ 25°C |
PV |
100 |
mW |
Junction temperature |
|
Tj |
125 |
°C |
Output (Detector) |
|
|
|
|
|
|
|
|
|
Parameter |
Test Conditions |
Symbol |
Value |
Unit |
Collector base voltage |
|
VCBO |
90 |
V |
Collector emitter voltage |
|
VCEO |
90 |
V |
Emitter collector voltage |
|
VECO |
7 |
V |
Collector current |
|
IC |
50 |
mA |
Collector peak current |
tp/T = 0.5, tp ≤ 10 ms |
ICM |
100 |
mA |
Power dissipation |
Tamb ≤ 25°C |
PV |
150 |
mW |
Junction temperature |
|
Tj |
125 |
°C |
Coupler |
|
|
|
|
|
|
|
|
|
Parameter |
Test Conditions |
Symbol |
Value |
Unit |
Isolation test voltage (RMS) |
t = 1 min |
VIO |
3.75 |
kV |
Total power dissipation |
Tamb ≤ 25°C |
Ptot |
250 |
mW |
Ambient temperature range |
|
Tamb |
±55 to +100 |
°C |
Storage temperature range |
|
Tstg |
±55 to +125 |
°C |
Soldering temperature |
2 mm from case, t ≤ 10 s |
Tsd |
260 |
°C |
Rev. A3, 11±Jan±99 |
225 |
TCDT1120(G) Series
Vishay Telefunken
Electrical Characteristics (Tamb = 25°C)
Input (Emitter)
Parameter |
Test Conditions |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Forward voltage |
IF = 50 mA |
VF |
|
1.25 |
1.6 |
V |
Junction capacitance |
VR = 0, f = 1 MHz |
Cj |
|
50 |
|
pF |
Output (Detector)
Parameter |
Test Conditions |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Collector base voltage |
IC = 100 mA |
VCBO |
90 |
|
|
V |
Collector emitter voltage |
IC = 1 mA |
VCEO |
90 |
|
|
V |
Emitter collector voltage |
IE = 100 mA |
VECO |
7 |
|
|
V |
Collector emitter cut-off |
VCE = 20 V, If = 0 |
ICEO |
|
|
150 |
nA |
current |
|
|
|
|
|
|
Coupler
Parameter |
Test Conditions |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Collector emitter |
IF = 10 mA, IC = 1 mA |
VCEsat |
|
|
0.3 |
V |
saturation voltage |
|
|
|
|
|
|
Cut-off frequency |
VCE = 5 V, IF = 10 mA, |
fc |
|
110 |
|
kHz |
|
RL = 100 W |
|
|
|
|
|
Coupling capacitance |
f = 1 MHz |
Ck |
|
0.3 |
|
pF |
Current Transfer Ratio (CTR)
Parameter |
Test Conditions |
Type |
Symbol |
Min. |
Typ. |
Max. |
Unit |
IC/IF |
VCE = 5 V, IF = 1 mA |
TCDT1120(G) |
CTR |
0.10 |
|
|
|
|
|
TCDT1122(G) |
CTR |
0.15 |
|
|
|
|
|
TCDT1123(G) |
CTR |
0.30 |
|
|
|
|
|
TCDT1124(G) |
CTR |
0.60 |
|
|
|
|
VCE = 5 V, IF = 10 mA |
TCDT1120(G) |
CTR |
0.40 |
|
|
|
|
|
TCDT1122(G) |
CTR |
0.63 |
|
1.25 |
|
|
|
TCDT1123(G) |
CTR |
1 |
|
2.00 |
|
|
|
TCDT1124(G) |
CTR |
1.60 |
|
3.20 |
|
226 |
Rev. A3, 11±Jan±99 |