Vishay TPSMB10, TPSMB10A, TPSMB11, TPSMB11A, TPSMB12 Schematic [ru]

TPSMB6.8 thru TPSMB43A

www.vishay.com	Vishay General Semiconductor

Surface Mount PAR® Transient Voltage Suppressors

High Temperature Stability and High Reliability Conditions

DO-214AA (SMBJ)

PRIMARY CHARACTERISTICS

VBR	6.8 V to 43 V
VWM	5.50 V to 36.8 V
PPPM	600 W
IFSM	75 A
TJ max.	185 °C
Polarity	Uni-directional
Package	DO-214AA (SMBJ)

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication.

FEATURES

•Junction passivation optimized design passivated anisotropic rectifier technology

• TJ = 185 °C capability suitable for high reliability and automotive requirement

•Available in uni-directional polarity only

•600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %

•Excellent clamping capability

•Very fast response time

•Low incremental surge resistance

•Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C

•AEC-Q101 qualified

•Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

MECHANICAL DATA

Case: DO-214AA (SMBJ)

Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102

HE3 suffix meets JESD 201 class 2 whisker test

Polarity: Color band denotes cathode end

MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)

PARAMETER	SYMBOL	VALUE	UNIT
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) (1)(2)	PPPM	600	W
Peak pulse current with a 10/1000 μs waveform (fig. 3) (1)	IPPM	See table next page	A
Peak forward surge current 8.3 ms single half sine-wave (2)(3)	IFSM	75	A
Maximum instantaneous forward voltage at 50 A (2)(3)	VF	3.5	V
Operating junction and storage temperature range	TJ, TSTG	-65 to +185	°C

Notes

(1)Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

(2)Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads at each terminal

(3)Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum

Revision: 06-Jun-14

1

Document Number: 88406

For technical questions within your region: [e-mail], [e-mail], [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TPSMB6.8 thru TPSMB43A

	www.vishay.com							Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
								MAXIMUM	MAXIMUM	MAXIMUM		MAXIMUM
									REVERSE	PEAK
	DEVICE	BREAKDOWN				TEST	STAND-OFF	REVERSE				CLAMPING
DEVICE									LEAKAGE	PULSE
	MARKING	VOLTAGE				CURRENT	VOLTAGE	LEAKAGE	AT VWM	SURGE		VOLTAGE
TYPE		V	BR	(1) AT I		IT	VWM	AT VWM				AT IPPM
	CODE				T	(mA)	(V)	IR	TJ = 150 °C	CURRENT		VC
				(V)					ID	IPPM	(2)
								(μA)				(V)
		MIN.			MAX.				(μA)	(A)
TPSMB6.8	KDP	6.12			7.48	10	5.5	500	1000	55.6		10.8
TPSMB6.8A	KEP	6.45			7.14	10	5.8	500	1000	57.1		10.5
TPSMB7.5	KFP	6.75			8.25	10	6.05	250	500	51.3		11.7
TPSMB7.5A	KGP	7.13			7.88	10	6.4	250	500	53.1		11.3
TPSMB8.2	KHP	7.38			9.02	10	6.63	100	200	48		12.5
TPSMB8.2A	KKP	7.79			8.61	10	7.02	100	200	49.6		12.1
TPSMB9.1	KLP	8.19			10	1	7.37	25	50	43.5		13.8
TPSMB9.1A	KMP	8.65			9.55	1	7.78	25	50	44.8		13.4
TPSMB10	KNP	9			11	1	8.1	5	20	40		15
TPSMB10A	KPP	9.5			10.5	1	8.55	5	20	41.4		14.5
TPSMB11	KQP	9.9			12.1	1	8.92	2	5	37		16.2
TPSMB11A	KRP	10.5			11.6	1	9.4	2	5	38.5		15.6
TPSMB12	KSP	10.8			13.2	1	9.72	2	5	34.7		17.3
TPSMB12A	KTP	11.4			12.6	1	10.2	2	5	35.9		16.7
TPSMB13	KUP	11.7			14.3	1	10.5	2	5	31.6		19
TPSMB13A	KVP	12.4			13.7	1	11.1	2	5	33		18.2
TPSMB15	KWP	13.5			16.5	1	12.1	1	5	27.3		22
TPSMB15A	KXP	14.3			15.8	1	12.8	1	5	28.3		21.2
TPSMB16	KYP	14.4			17.6	1	12.9	1	5	25.5		23.5
TPSMB16A	KZP	15.2			16.8	1	13.6	1	5	26.7		22.5
TPSMB18	LDP	16.2			19.8	1	14.5	1	5	22.6		26.5
TPSMB18A	LEP	17.1			18.9	1	15.3	1	5	23.8		25.2
TPSMB20	LFP	18			22	1	16.2	1	5	20.6		29.1
TPSMB20A	LGP	19			21	1	17.1	1	5	21.7		27.7
TPSMB22	LHP	19.8			24.2	1	17.8	1	5	18.8		31.9
TPSMB22A	LKP	20.9			23.1	1	18.8	1	5	19.6		30.6
TPSMB24	LLP	21.6			26.4	1	19.4	1	5	17.3		34.7
TPSMB24A	LMP	22.8			25.2	1	20.5	1	5	18.1		33.2
TPSMB27	LNP	24.3			29.7	1	21.8	1	5	15.3		39.1
TPSMB27A	LPP	25.7			28.4	1	23.1	1	5	16		37.5
TPSMB30	LQP	27			33	1	24.3	1	5	13.8		43.5
TPSMB30A	LRP	28.5			31.5	1	25.6	1	5	14.5		41.4
TPSMB33	LSP	29.7			36.3	1	26.8	1	5	12.6		47.7
TPSMB33A	LTP	31.4			34.7	1	28.2	1	5	13.1		45.7
TPSMB36	LUP	32.4			39.6	1	29.1	1	5	11.5		52
TPSMB36A	LVP	34.2			37.8	1	30.8	1	5	12		49.9
TPSMB39	LWP	35.1			42.9	1	31.6	1	5	10.6		56.4
TPSMB39A	LXP	37.1			41	1	33.3	1	5	11.1		53.9
TPSMB43	LYP	38.7			47.3	1	34.8	1	5	9.7		61.9
TPSMB43A	LZP	40.9			45.2	1	36.8	1	5	10.1		59.3

Notes

(1)VBR measured after IT applied for 300 μs, IT = square wave pulse or equivalent

(2)Surge current waveform per fig. 3 and derated per fig. 2

(3)All terms and symbols are consistent with ANSI/IEEE C62.35

Revision: 06-Jun-14

2

Document Number: 88406

For technical questions within your region: [e-mail], [e-mail], [e-mail]

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000