K3010P(G) Series
Vishay Telefunken
Optocoupler with Phototriac Output
Description
The K3010P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emit- ting diode in a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements.
Applications
Circuits for safe protective separation against electri- |
14827 |
cal shock according to safety class II (reinforced isolation):
D For appl. class I ± IV at mains voltage ≤ 300 V
D For appl. class I ± III at mains voltage ≤ 600 V according to VDE 0884, table 2, suitable for:
Monitors, air conditioners, line switches, solid state relays, microwaves.
VDE Standards
These couplers perform safety functions according to the following equipment standards:
DVDE 0884
Optocoupler for electrical safety requirements
DIEC 950/EN 60950
~~
6 5 4
|
|
95 10812 |
1 |
2 |
3 |
A (+) |
C (±) |
nc |
Note: Pin 5 must not be connected
Office machines (applied for reinforced isolation for mains voltage ≤ 400 VRMS)
DVDE 0804
Telecommunication apparatus and data processing
DIEC 65
Safety for mains-operated electronic and related household apparatus
Order Instruction
Ordering Code |
CTR Ranking |
Remarks |
K3010P/ K3010PG1) |
< 15 mA |
|
K3011P/ K3011PG1) |
< 10 mA |
|
K3012P/ K3012PG1) |
< 5 mA |
|
1) G = Leadform 10.16 mm; G is not marked on the body
Document Number 83504 |
www.vishay.de •FaxBack +1-408-970-5600 |
Rev. A4, 13±Sep±99 |
1 (9) |
K3010P(G) Series
Vishay Telefunken
Features
Approvals:
DBSI: BS EN 41003, BS EN 60095 (BS 415), BS EN 60950 (BS 7002),
Certificate number 7081 and 7402
DFIMKO (SETI): EN 60950, Certificate number 12398
DUnderwriters Laboratory (UL) 1577 recognized, file number E-76222
DVDE 0884, Certificate number 94778
VDE 0884 related features:
DRated impulse voltage (transient overvoltage) VIOTM = 6 kV peak
DIsolation test voltage (partial discharge test voltage) Vpd = 1.6 kV
DRated isolation voltage (RMS includes DC) VIOWM = 600 VRMS (848 V peak)
DRated recurring peak voltage (repetitive) VIORM = 600 VRMS
DCreepage current resistance according to VDE 0303/IEC 112
Comparative Tracking Index: CTI = 275
DThickness through insulation ≥ 0.75 mm
General features:
DIsolation materials according to UL 94-VO
DPollution degree 2 (DIN/VDE 0110 resp. IEC 664)
DClimatic classification 55/100/21 (IEC 68 part 1)
DSpecial construction:
Therefore, extra low coupling capacity of typical 0.2 pF, high Common Mode Rejection
DIFT offered in 3 groups
DCoupling System C
Absolute Maximum Ratings
Input (Emitter)
Parameter |
Test Conditions |
Symbol |
Value |
Unit |
Reverse voltage |
|
VR |
5 |
V |
Forward current |
|
IF |
80 |
mA |
Forward surge current |
tp ≤ 10 ms |
IFSM |
3 |
A |
Power dissipation |
Tamb ≤ 25°C |
PV |
100 |
mW |
Junction temperature |
|
Tj |
100 |
°C |
Output (Detector)
Parameter |
Test Conditions |
Symbol |
Value |
Unit |
Off state output terminal voltage |
|
VDRM |
250 |
V |
On state RMS current |
|
ITRMS |
100 |
mA |
Peak surge current, non-repetitive |
tp ≤ 10 ms |
ITMS |
1.5 |
A |
Power dissipation |
Tamb ≤ 25°C |
PV |
300 |
mW |
Junction temperature |
|
Tj |
100 |
°C |
Coupler
Parameter |
Test Conditions |
Symbol |
Value |
Unit |
Isolation test voltage (RMS) |
t = 1 min |
VIO 1) |
3.75 |
kV |
Total power dissipation |
Tamb ≤ 25°C |
Ptot |
350 |
mW |
Ambient temperature range |
|
Tamb |
±40 to +85 |
°C |
Storage temperature range |
|
Tstg |
±55 to +100 |
°C |
Soldering temperature |
2 mm from case, t ≤ 10 s |
Tsd |
260 |
°C |
1) Related to standard climate 23/50 DIN 50014
www.vishay.de •FaxBack +1-408-970-5600 |
Document Number 83504 |
2 (9) |
Rev. A4, 13±Sep±99 |
K3010P(G) Series
Vishay Telefunken
Electrical Characteristics (Tamb = 25°C)
Input (Emitter)
Parameter |
Test Conditions |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Forward voltage |
IF = 50 mA |
VF |
|
1.25 |
1.6 |
V |
Junction capacitance |
VR = 0, f = 1 MHz |
Cj |
|
50 |
|
pF |
Output (Detector)
Parameter |
Test Conditions |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Forward peak off-state |
IDRM = 100 nA |
VDRM 1) |
250 |
|
|
V |
voltage (repetitive) |
|
|
|
|
|
|
Peak on-state voltage |
ITM = 100 mA |
VTM |
|
1.5 |
3 |
V |
Critical rate of rise of |
IFT = 0, IFT = 30 mA |
(dv/dt)cr |
|
10 |
|
V/ms |
off-state voltage |
|
(dv/dt)crq |
0.1 |
0.2 |
|
m |
|
|
|
V/ s |
|||
1) Test voltage must be applied within dv/dt ratings |
|
|
|
|
|
Coupler
Parameter |
Test Conditions |
Type |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Emitting diode trigger |
VS = 3 V, RL = 150 W |
K3010P(G) |
IFT |
|
8 |
15 |
mA |
current |
|
K3011P(G) |
IFT |
|
5 |
10 |
mA |
|
|
K3012P(G) |
IFT |
|
2 |
5 |
mA |
Holding current |
IF = 10 mA, VS ≥ 3 V |
|
IH |
|
100 |
|
mA |
Note: IFT is defined as a minimum trigger current
RS |
IFT |
V~ |
RL |
95 10813 |
Test condition: dv/dtcr
VS = 2/3 VDRM (Sine wave)
RL = 33 kΩ dv/dtcrq Veff = 30 V
(Sine wave) RL = 2 kΩ
Figure 1. Test circuit for dv/dtcr and dv/dtcrp
Document Number 83504 |
www.vishay.de •FaxBack +1-408-970-5600 |
Rev. A4, 13±Sep±99 |
3 (9) |