Installation Guide
Dishwasher Door Panel Kits
PDDP242 / RVDP324/TVDDP24
Door Panel Installation
For FDW300/FDW300WS/FDW100/FDW100WS/FDW101 and
FDW101W Models (Purchased Separately)
The unit comes with everything needed to make installing the door panel easy.
What you will need:
Phillips Head |
#8 1-3/4” long, Stainless Steel |
Screwdriver |
Phillips Head Screw |
|
(4 supplied) |
D
Dishwasher Door
Door Panel |
|
D |
|
|
|
|
|
|
|
|
|
C
C
Plastic
Retainers
2
Installation
1 |
2 |
Plastic
Retainers
Remove plastic retainers from door panel and discard.
Remove plastic mounting brackets from the dishwasher and discard.
3 |
4 |
|
C |
D |
D |
|
C |
x4 |
|
x2 |
|
D |
|
|
|
D |
D
Carefully open the dishwasher door. Remove the (2) white caps from holes (C) and the (2) top screws from holes (D) on dishwasher door.
Carefully secure the door panel to the dishwasher through holes (D) using the four flat PHD screws provided. Carefully tighten all four screws and check to ensure that the panel is square with the dishwasher door.
Do not over tighten screws. This may cause damage to the inner door.
Note: Verify the operation of the door counterbalance springs after installation of the door skin.
Note: Verify that the door does not hit the kickplate. Adjust kickplate if necessary.
3