|
TECHNICAL |
|
Hot-Line Touch |
|
|
|
|
|
|
K-1900-5 |
|
|
Practice |
|
Tone Dialer |
|
|
TELECOM SOLUTIONS FOR THE 21ST CENTURY |
|
February 8, 2005 |
|
||
|
|
|
|||
|
|
|
|
|
|
Replace Dedicated Phone Lines with a Touch Tone Hot-Line Dialer
Why pay the premium of leased or dedicated phone lines?
The K-1900-5 will automatically dial a preprogrammed number, of up to 32 digits, whenever an associated telephone is taken off hook. Using non-volatile E2 memory, the K-1900-5 is telephone line powered and will operate on any loop start central office line or analog PABX/KSU extension.
The K-1900-5 is easily programmed remotely or locally using a standard Touch Tone phone.
! This product does not eliminate the possibility of toll fraud! To further protect against fraudulent calls, use with a TR-1 Toll Restrictor (Fax Back Document 705).
Features
•Touch Tone programmable
•Telephone line powered
•Non-volatile E2 memory (no batteries required)
•Ring detection (won’t dial on inbound calls)
•User programmable security code
•Programmable pauses in one and four second increments
•Programmable to interrupt user Touch Tone dialing to help control fraudulent calls from hand held dialers, etc.
•Programmable dialing speed (normal or fast)
•Can be configured to operate from a contact closure (Fax Back Document 818)
Installation
Applications
•Security and emergency phones
•Interactive point of sale displays
•Apartment security
•Catalog sales
•Automated Teller Machines (ATM’s)
•Replaces leased ring down circuits
•Hot-Line reservation phones for hotels, airlines, car rentals, etc.
Specifications
Power: Telephone line powered (24V DC 20 mA minimum)* Dimensions: 74mm x 53mm x 25mm (2.9” x 2.1” x 1.0”)
Shipping Weight: .45 kg (1 lb)
Environment: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
Connections: (1) RJ11 plug, (1) RJ11 jack
Dialing Speed: Normal - 120ms on/off, Fast - 50ms on/off
* Note: When installing multiple line powered products (K-1900-5 and E- 10/E-15/E-20A/K-1500-EHF) on the same line, additional talk battery voltage and loop current may be required.
Install the K-1900-5 in series between a telephone and a C.O. line or analog PABX/KSU station.
C.O. Line or Analog |
|
VIKING© |
Standard Analog |
|||||||||||||||||||||
|
Programmable |
|||||||||||||||||||||||
|
|
Tone Dialer |
Telecom Device |
|||||||||||||||||||||
PABX/KSU Station |
|
|
||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
MODEL: K-1900-5 |
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
Quick Programming Guide |
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
1. Call the phone connected to the dialer. |
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
2. Answer phone. Enter & security code. |
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
(Factory set to 845464) |
Write your |
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
security code below: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. Enter your spped dial number & #00. |
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
Note: For additional programming see |
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
K-1900-5 Technical Practice. |
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
Viking Electronics, Inc. |
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
Hudson, WI 54016 |
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
LINE IN |
|
|
PHONE |
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A.Accessing the Programming Mode
1.Connect the K-1900-5 to a C.O. line or analog PABX/KSU station.
2.From a Touch Tone phone, call another phone connected to the
K-1900-5.
3.Take the phone connected to the dialer off hook (answer the phone).
4.Enter followed by the six digit security code (see section D on the next page). A double beep will indicate that you have accessed the programming mode.
5.You can now program your speed dial number and the following features listed in section B below.
Note: Programming from a cell-phone may not be suitable in areas with weak coverage.
Loading...